This article presents an experimental and computational study of the efficiency of an unshrouded transonic turbine. This research formed part of the EU Turbine Aero-Thermal External Flows II programme. The experiments were performed in the Oxford Turbine Research Facility (previously the Turbine Test Facility at QinetiQ, Farnborough). This facility is an engine scale, short duration, rotating transonic facility, in which M, Re,
, and
are matched to engine conditions. For these experiments, the MT1 turbine stage was installed. Historically, turbine efficiency measurements are conducted in steady state adiabatic facilities. However, short-duration facilities allow simultaneous aerodynamic and heat transfer measurements with a significant reduction in cost. An efficiency measurement system was developed for this investigation, and this is briefly described. The system allows efficiency to be evaluated to bias and precision errors of approximately ±1.45 per cent and ±0.16 per cent, respectively, to 95 per cent confidence. The results of accurate area surveys of the turbine inlet and exit flows are presented and discussed. At the turbine exit, data were taken at two traverse planes, approximately 0.5 and 4.5 rotor axial chords downstream of the rotor. The turbine efficiency was experimentally evaluated based on the data at both planes, using a number of mixing models, which are discussed and compared. The experimental result of turbine efficiency is also compared to that estimated from a mean-line prediction. Full-stage steady and unsteady computational fluid dynamics of the experiment using the Rolls-Royce HYDRA code was conducted and is also presented. The predicted and measured rotor exit flow-fields are compared at both downstream traverse planes.
