Interaction of shrouded stator flow and main flow and its influence on performances of a three-stage high pressure compressor †

Abstract

The prediction of the complex flows within a turbomachinery remains a challenging issue for computational fluid dynamics (CFD). The real features of a turbomachinery must be taken into account in the simulation but they increase its complexity. One of these features is the leakage flow due to the axial gap between the fixed and rotating parts of the hub. This article focuses on this flow within the scope of a high-pressure compressor. The results are compared with experimental data obtained in the main flow path. The leakage flow is characterized by several vortices, especially near the hub and between the seal-teeth. It interacts with the main flow: the hub separation is quite wider while the casing one is reduced in comparison with the smooth case. In this article, the smooth case is related to the simulation without any shrouded stator cavity. The leakage flow influences strongly on compressor performances. Taking into account the leakage flow in the CFD improves the agreement between CFD and experimental values. Due to the vortex prediction, the influence of the turbulence modelling is also assessed. The explicit algebraic Reynolds stress model improves the flow prediction while the presently investigated differential Reynolds stress model predicts too wide hub corner separation which leads to high underestimation of compressor performances.

Keywords

axial compressor high pressure compressor shrouded stator leakage flow interaction seal-teeth corner separation

Get full access to this article

View all access options for this article.

References

Jefferson

J. L.

Turner

R. C.

Some shrouding and tip clearance effects in axial flow compressors. Int. Ship. Build. Prog., 1958, 5, 78–101.

Freeman, C., Effect of tip clearance flow on compressor stability and engine performance. In tip clearance effect in axial turbomachinery 1985, vol. 5 (VKI Lecture Series).

Heidegger

N. J.

Hall

E. J.

Delaney

R. A.

Parameterized study of high-speed compressor seal cavity flow, AIAA Paper No. 96-2807, 1996.

LeJambre

C. R.

Zacharias

R. M.

Biederman

B. P.

Gleixner

A. J.

Yetka

C. J.

Development and application of a multistage Navier-Stokes flow solver, part II: application to a high-pressure compressor design. J. Turbomach., 1998, 120, 215–223.

Wellborn

S. R.

Okiishi

T. H.

Influence of shrouded stator cavity flows on multistage compressor performance. J. Turbomach., 1999, 121, 486–498.

Demargne, A. A. J. and Longley, J. P. The aerodynamic interaction of stator shroud leakage and mainstream flows in compressors. In ASME Turbo Expo, Munich, Germany, 8–11 May 2000, ASME Paper 2000-GT-570.

Wellborn, S. R. Details of axial-compressor shrouded stator cavity flows. In ASME Turbo Expo, New Orleans, Louisiana, 4–7 June 2001, 2001-GT-0495.

Gier

Stubert

Brouillet

de Vito

Interaction of shroud leakage flow and main flow in a three-stage LP Turbine. J. Turbomach., 2005, 127, 649–658.

Adami

Martelli

Cecchi

Analysis of the shroud leakage flow and mainflow interactions in high-pressure turbines using an unsteady computational fluid dynamics approach. Proc. IMechE, Part A: J. Power and Energy, 2007, 221(6), 837–848.

10.

Sharma, V. C., Schvallinger, M., Marty, J. and Gaible, H. Turbulence modelling effects on off-design predictions for a multistage compressor. In ISABE-2007-1183, Beijing, China, 2–7 September 2007.

11.

Marty, J., Aupoix, B., Schvallinger, M. and Sharma, V. C. Effet de la modélisation de la turbulence en proche pompage dans un compresseur multi-étages. AAAF, 43ème Colloque d'Aérodynamique Appliquée, Papier 14, Poitiers, France, 10–12 March 2008.

12.

Marty, J., Cottin, G. and Aupoix, B.Turbulence modelling and transition to turbulence effects for a high pressure multistage compressor. In (Heitmeir, F., Martelli, F. and Manna, M. editors), 8th European conference on turbomachinery fluid dynamics and thermodynamics, pp. 163–172, Graz, Austria, 23–27 March 2009.

13.

Touyeras, A. and Villain, M Aerodynamic design and test result analysis of a three stage research compressor. In ASME Turbo Expo 2004, Vienne, Austria, 14–17 June 2004, ASME Paper GT2004-53940.

14.

Arnaud, D., Ottavy, X. and Vouillarmet, A. Experimental investigation of the rotor-stator interactions, within a high speed, multistage, axial compressor Part 1 – experimental facilities and results. In ASME Turbo Expo 2004, Vienne, Austria, 14–17 June 2004, ASME Paper GT2004-53764.

15.

Arnaud, D., Ottavy, X. and Vouillarmet, A. Experimental investigation of the rotor-stator interactions, within a high speed, multistage, axial compressor. Part 2 – modal analysis of the interactions. In ASME Turbo Expo 2004, Vienne, Austria, 14–17 June 2004, ASME Paper GT2004-53778.

16.

Cambier, L. and Veuillot, J. P. Status of the elsA CFD software for flow simulation and multidisciplinary applications. In AIAA 2008-664, 46th AIAA aerospace sciences meeting and exhibit, Reno, Nevada, January 2008.

17.

Smith, B. R. A near wall model for the k-l two equation turbulence model. In AIAA Paper 94-2386 25th fluid dynamics conference, Colorado Springs, Colorado, 20–23 June 1994.

18.

Wallin

Johansson

A. V.

An explicit algebraic Reynolds stress model for incompressible and compressible turbulent flows. J. Fluid Mech., 2000, 403, 89–132.

19.

Speziale

C. G.

Sarkar

Gatski

T. B.

Modelling the pressure-strain correlation of turbulence: An invariant dynamical systems approach. J. Fluid. Mech., 1991, 227, 245–272.

20.

Benoit

Jeanfaivre

Three-dimensional inviscid isolated rotor calculations using chimera and automatic cartesian partitioning methods. J. Am. Helicopter Soc., 2003, 48(2), 128–138.