Vortex development induced by part gap geometry and endwall configurations for variable stator vanes in a compressor cascade

Abstract

The article describes investigations on the three-dimensional (3D) flowfield development near the endwall of a linear compressor cascade which is caused by specific part gap and endwall concepts of adjustable stator vanes. Their beneficial or harmful characteristics, previously measured with outlet loss and flow turning distributions, are investigated inside the passage at different stagger angles to analyse the origin and the interaction of the geometry-induced vortex system. Qualitative blade-to-blade measurements were conducted with particle image velocimetry in several spanwise positions as well as oil flow visualisation on the blade surfaces and the endwall. Improved three-dimensional (3D) numerical Reynolds-averaged Navier–Stokes (RANS) calculations with Reynolds-stress turbulence models were carried out and enhance the experimental findings. Results indicate extensive interactions between secondary flow and leakage flow through a penny gap depending on the aerodynamic loading. The part clearance vortex development and its impact to the blade boundary layers downstream the passage is visualised and enhances the understanding of the geometry effect. Also, the impact of the endwall concepts without radial clearances to the endwall boundary layer is shown and explains their beneficial characteristics compared to a reference geometry.

Keywords

Variable stator vanes radial gaps endwall contour vortex development secondary flow compressor cascade

Get full access to this article

View all access options for this article.

References

Ribi

Meyer

. Influence of gap between casing and variable stator blade on axial compressor performance. ASME Conf Proc 2008; 43161: 203–217.

Hoying

Tan

. Role of blade passage flow structurs in axial compressor rotating stall inception. J Turbomach 1999; 121: 735–742.

Clemen C, Gümmer V, Nerger D, et al. Investigation of different endwall part-clearance configurations on a low speed compressor cascade. In: 7th European turbomachinery conference, Athens, Greece, 2007.

Gottschall M, Mailach R and Vogeler K. The effect of two different endwall-penny concepts for variable stator vanes in a compressor cascade. ASME Turbo Expo, Copenhagen, Denmark, 12–15 June 2012, paper no GT2012-68404.

Gottschall

Mailach

Vogeler

. Penny gap effect on performance and secondary flowfield in a compressor cascade. AIAA J Propul Power 2012; 28: 9–9.

Stauter

Dring

Carta

. Temporally and spatially resolved flow in a two-stage axial compressor: part 1—Experiment. J Turbomach 1991; 113: 219–225.

Fischer

Büttner

Czarske

. Investigation of the tip clearance flow in a compressor cascade using a novel laser measurement technique with high temporal resolution. J Turbomach 2012; 134: 051004–051004.

Tisserant

Breugelmans

FAE

. Rotor blade-to-blade measurements using particle image velocimetry. J Turbomach 1997; 119: 176–181.

Balzani

Scarano

Riethmuller

. Experimental investigation of the blade-to-blade flow in a compressor rotor by digital particle image velocimetry. J Turbomach 2000; 122: 743–750.

10.

Sanders

Papalia

Fleeter

. Multi-blade row interactions in a transonic axial compressor: part I—Stator particle image velocimetry (PIV) investigation. J Turbomach 2002; 124: 10–18.

11.

Palafox

Oldfield

MLG

LaGraff

. PIV maps of tip leakage and secondary flow fields on a low-speed turbine blade cascade with moving end wall. J Turbomach 2008; 130: 011001–011001.

12.

Liu

Wang

Liu

Turbomach

. Experimental investigation of unsteady flow field in the tip region of an axial compressor rotor passage at near stall condition with stereoscopic particle image velocimetry. J Turbomach 2004; 126: 360–374.

13.

Liu

. Stereoscopic PIV measurement of unsteady flows in an axial compressor stage. Exp Thermal Fluid Sci 2007; 31: 1049–1060.

14.

Rehder

Dannhauer

. Experimental investigation of turbine leakage flows on the three-dimensional flow field and endwall heat transfer. J Turbomach 2007; 129: 608–618.

15.

Hecklau

van Rennings

Zander

. Particle image velocimetry of active flow control on a compressor cascade. Exp Fluids 2011; 50: 799–811.

16.

Aktürk

Camci

. Axial flow fan tip leakage flow control using tip platform extensions. J Fluids Eng 2010; 132: 051109–051109.

17.

Wernet

Zante

Strazisar

. Characterization of the tip clearance flow in an axial compressor using 3-D digital PIV. Exp Fluids 2005; 39: 743–753.

18.

Künzelmann

Müller

Mailach

. Steady and unsteady flow field in a multistage low-speed axial compressor: a test case. ASME Conf Proc 2008; 43161: 447–455.

19.

Gottschall M, Mailach R and Vogeler K. The effect of four part gap geometry configurations for variable stator vanes in a compressor cascade. ASME Turbo Expo, Copenhagen, Denmark, 12–15 June 2012, paper no. GT2012-69757.