Impact of the large-scale environment on the tonal noise of axial fans

Abstract

The measurement of the sound emission of axial fans is standardized by internationally accepted guidelines. While it is known that the sound emission of fans is significantly influenced by the inflow conditions, the standards address this issue barely. A detailed definition of the inflow conditions for standardized acoustic measurements of axial fans does not exist. In this investigation, it is shown that disturbed inflow conditions exist even when the test rig meets the requirements of the current standards. Flow visualization and RANS simulation reveal unexpected vortex-like flow structures at the intake and inside the duct originating in the large anechoic chamber. These large-scale eddies in the inflow are also recognized by flush mounted pressure transducers on the blade surface of the impeller. It turns out that a hemispherical inflow control device may be suitable to get closer to the state of test rig independent acoustic measurements of axial fans.

Keywords

Turbomachinery noise tonal noise of axial fans blade passing frequency

Get full access to this article

View all access options for this article.

References

Goldstein

. Aeroacoustics, New York, USA: McGraw-Hill, Inc, 1976.

Sturm

Carolus

. Tonal fan noise of an isolated axial fan rotor due to inhomogeneous coherent structures at the intake. Noise Control Eng J 2012; 60: 699–706.

Hanson

. Spectrum of rotor noise caused by atmospheric turbulence. J Acoust Soc Am 1974; 56: 110–126.

Gülich

. Kreiselpumpen, 2nd ed. Heidelberg, Germany: Springer-Verlag, 2004.

Seddon

Goldsmith

. Intake aerodynamics, 2nd ed. Oxford, UK: Blackwell Science Ltd, 1999.

De Siervi

Viguier

Greitzer

. Mechanism of inlet-vortex formation. J Fluid Mech 1982; 124: 173–207.

ISO 13347:2004. Industrial fans – Determination of fan sound power levels under standardized laboratory conditions. 1st ed. Geneva, Switzerland: International Organization for Standardization.

DIN EN ISO 5801:2011. Industrial fans – performance testing using standardized airways. Berlin, Germany: Deutsches Institut für Normung e.V., Beuth-Verlag.

Schlichting

. Boundary-layer theory, New York, USA: McGraw-Hill, Inc, 1979.

10.

Scheiman J and Brooks JD. Comparison of experimental and theoretical turbulence reduction from screens, honeycomb and honeycomb-screen combinations. In: 11th aerodynamic testing conference, Colorado Springs, USA, 18–20 March 1980, AIAA, Technical Papers (A80-26929 10-09), pp.129–137. New York, USA: American Institute of Aeronautics and Astronautics, Inc.

11.

SAE. Methods of controlling distortion of inlet airflow during static acoustical tests of turbofan engines and fan rigs. Aerospace Information Report. February 1985. Warrendale, USA: Society of Automotive Engineers (SAE).

12.

Groth

Johansson

. Turbulence reduction by screens. J Fluid Mech 1988; 197: 139–155.