The role of variable pitch in motion blades and variable rotational speed in an industrial fan stall

Abstract

Stall-induced vibration places fundamental limitations on industrial fan performance and remains a persistent problem in the development of industrial fans and compressors. In this paper, we present an experimental programme that utilised two strategies to study rotating stall recovery patterns in an industrial fan. The experimental facility incorporated a fan with both variable pitch in motion blades and a variable speed drive. The facility enabled us first, to study the evolution of unsteady pressure signals on the fan casing whilst varying fan blade pitch and then to examine varying fan rotational speed. Consequently, we were able to recover a fan from stall either by varying blade pitch at constant speed, or by varying speed at constant blade pitch. We also studied the physical flow phenomena associated with stall recovery by cross-correlating signals from circumferentially offset high frequency response pressure transducers and then analysed the cross-spectra. This enabled us to gain insight into the transient fluid flow behaviour associated with stall recovery in the studied industrial fan class. The transient fluid flow behaviour associated with stall recovery by varying blade pitch was indicative of both a mild and progressive transition. In contrast, stall recovery by varying fan speed occurred more suddenly. In comparison with the variable pitch transition, the variable speed transition was more indicative of recovery from mild surge. From this we may conclude that stall recovery via variable speed resulted in significantly higher unsteady mechanical stress induced in fan rotating components than recovery via variable pitch. Higher bending stresses in the fan blades are more likely to result in mechanical failure, and therefore we may conclude that the studied fan is more ‘stall tolerant’ when one operates it as a variable pitch fan rather than as a variable speed fan.

Keywords

Fan stall industrial fan variable pitch in motion

Get full access to this article

View all access options for this article.

References

Greitzer

. Review – axial compressor stall phenomena. Trans ASME J Fluids Eng 1980; 102: 134–151.

Day

Cumpsty

. The measurement and interpretation of flow within rotating stall cells in axial compressors. J Mech Eng Sci 1978; 20: 101–114.

Moore

. A theory of rotating stall of multistage compressors, Parts I–III. Trans ASME J Eng Power 1984; 106: 313–336.

Emmons

Pearson

Grant

. Compressor surge and stall propagation. Trans ASME 1955; 77: 455–469.

Gravdahl

Egeland

. Compressor surge and rotating stall: Modelling and control, London: Springer Verlag, 1999.

Cumpsty NA. Part-circumference casing treatment and the effect on compressor stall. In: Proceedings of the 34th American society of mechanical engineers gas turbine and aeroengine congress, Toronto, Canada, 5–8 June 1989, Paper No. 89-GT-312.

Rippl

. Experimentelle Untersuchungen zuminstationaren Betriebsverhahen an der Stabilitarsgrenze eines mehrstufigen transsonischen Verdichters, PhD Dissertation, Ruhr-Universitat Bochum, 1995.

Sheard AG and Corsini A. The mechanical impact of aerodynamic stall on tunnel ventilation fans. Int J Rotating Mach 2012; Article ID 402763, 12 pages. DOI:10.1155/2012/402763.

Sheard

Corsini

Bianchi

. Stall warning in a low-speed axial fan by visualisation of sound signals. J Eng Gas Turb Power 2011; 133: 1–10.

10.

Sheard AG and Jones NM. Approval of high-temperature emergency tunnel-ventilation fans: The impact of ISO 21927-3. In: Proceedings of the ITA-AITEES world tunnel congress and 34th general assembly, Agra, India, 2008.

11.

EN12101-3. Smoke and heat control systems. Specification for powered smoke and heat exhaust ventilators, 2002.

12.

ISO 21927-3. Smoke and heat control systems – Part 3. Specification for powered smoke and heat exhaust ventilators, 2006.

13.

Camp

Day

. A study of spike and modal stall phenomena in a low-speed axial compressor. Trans ASME J Turbomach 1998; 120: 393–401.

14.

Vo HD, Tan CS and Greitzer EM. Criteria for spike initiated rotating stall. In: Proceedings of the 50th American society of mechanical engineers gas turbine and aeroengine congress, Reno, Nevada, USA, 6–9 June 2005, Paper No. GT2005-68374.

15.

Deppe A, Saathoff H and Stark U. Spike-type stall inception in axial flow compressors. In: 6th conference on turbomachinery, fluid dynamics and thermodynamics, Lille, France, 7–11 March 2005.

16.

Bright MM, Qammar H, Vhora H, et al. Rotating pip detection and stall warning in high-speed compressors using structure function. In: Proceedings of AGARD RTO AVT conference, Toulouse, France, 11–15 May 1998.

17.

Okada

. Experiences with flow-induced vibration and low frequency noise due to rotating stall of centrifugal fan. J Low Freq Noise Vib 1987; 6: 76–87.

18.

Mongeau

Thompson

McLaughlin

. A method for characterizing aerodynamic sound sources in turbomachines. J Sound Vib 1995; 18: 369–389.

19.

Kameier

Neise

. Rotating blade flow instability as a source of noise in axial turbomachines. J Sound Vib 1997; 203: 833–853.

20.

Ivanov

. Axial blower, Patent 3,189,260, USA, 1965.

21.

Karlsson

Holmkvist

. Guide vane ring for a return flow passage in axial fans and a method of protecting it, Patent 4,602,410, USA, 1986.

22.

General Electric Company. Fan with variables pitch blades and translating bearing actuation system, Patent References 2648387, USA, 1975.

23.

Daly

. Woods practical guide to fan engineering, Colchester: Woods of Colchester Ltd, 1985.

24.

Langston

. Fitting a pitch. ASME Mech Eng Magazine 2009; 131: 38–42.

25.

ISO 5801. Industrial fans – performance testing using standardized airways, 2007.

26.

ISO IEC60651. Specification for sound level meters, 1994.

27.

Bianchi S, Sheard AG, Corsini A, et al. Detection of stall regions in a low speed axial fan. Part I – azimuthal acoustic measurements. In: Proceedings of the 55th American society of mechanical engineers gas turbine and aeroengine congress, Glasgow, Scotland, 14–18 June 2010, Paper No. GT2010-22753.

28.

Bianchi S, Sheard AG and Corsini A. Stall inception evolution and control in low speed axial fan fitted with variable pitch in motion. In: Proceedings of the 56th American society of mechanical engineers gas turbine and aeroengine congress, Vancouver, Canada, 6–10 June 2011, Paper No. GT2011-45725.

29.

Boerrigter HL. PreMeSys: A simulation program to determine the frequency and time response of a pressure measurement system. VKI Technical Memorandum, Von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, Belgium, 1996.

30.

Carbonaro M. Measurement techniques in fluid dynamics – An introduction. Von Karman Institute for Fluid Dynamics, Rhode Saint Genèse, Belgium, 2009.

31.

Outa

. Rotating stall and stall-controlled performance of a single stage subsonic axial compressor. J Therm Sci 2005; 15: 1–13.

32.

Leinhos

Schmid

Fottner

. The influence of transient inlet distortions on the instability inception of a low pressure compressor in a turbofan engine. Trans ASME J Turbomach 2001; 123: 1–8.

33.

McDougall

Cumpsty

Hynes

. Stall inception in axial compressors. Trans ASME J Turbomach 1990; 112: 116–123.