Straight-bladed vertical axis wind turbine rotor design guide based on aerodynamic performance and loading analysis

Abstract

Vertical axis wind turbines with straight blades are attractive for their relatively simple structure and aerodynamic performance. An efficient design methodology is required to enhance this resurging renewable energy technology. This paper aims to provide a robust design procedure built on an existing analytical approach to determine the optimum range of the design parameters for prototype construction. Identifying the proper range of design parameters can save significant time and resources in the initial turbine development stages. Here the double-multiple streamtube method has been utilized to analyze turbine aerodynamic performance. A parametric optimization has been performed for several design factors to maximize the turbine power coefficient and its operational range. The results show that the optimum value of the rotor solidity factor, blade aspect ratio, and rotor aspect ratio are in the range of 0.2 < σ < 0.6, 10 < μ < 20, and 0.5 < H/D < 2, respectively. Aerodynamic loading analysis has also been carried out, and the most severe stresses acting on the blades and supporting arms were determined. The most favorable bending stress distribution along the blade occurred when two supporting arms per blade were used at intermediate locations of 21% and 79% along the blade length. A comparative study of different supporting arm shapes demonstrated that utilizing aerodynamic profiles for turbine arms created the most acceptable aerodynamic response. A summary of design aspects addressed in this paper is presented in a useful summary flowchart.

Keywords

Straight-bladed vertical axis wind turbine SB-VAWT design guide double-multiple streamtube model aerodynamic performance aerodynamic loading

Get full access to this article

View all access options for this article.

References

Tai

Kang KW Jang

. Study on the analysis method for the vertical-axis wind turbines having Darrieus blades. Renew Energy 2013; 54: 26–31.

Aslam Bhutta

Hayat

Farooq

. Vertical axis wind turbine – a review of various configurations and design techniques. Renew Sustain Energy Rev 2012; 16: 1926–1939.

Battisti

Zanne

Dell’Anna

. Aerodynamic measurements on a vertical axis wind turbine in a large scale wind tunnel. J Energy Resour Technol Trans ASME 2011; 133. article ID 031201, 9 pages.

MacPhee

Beyene

. Recent advances in rotor design of vertical axis wind turbines. Wind Eng 2012; 36: 647–666.

Ottermo

Bernhoff

. Resonances and aerodynamic damping of a vertical axis wind turbine. Wind Eng 2012; 36: 297–304.

Pope

Dincer

Naterer

. Energy and exergy efficiency comparison of horizontal and vertical axis wind turbines. Renew Energy 2010; 35: 2102–2113.

Chong

Pan

Poh

. Performance investigation of a power augmented vertical axis wind turbine for urban high-rise application. Renew Energy 2013; 51: 388–397.

Muller

Mark

Jentsch

. Vertical axis resistance type wind turbines for use in buildings. Renew Energy 2009; 34: 1407–1412.

Zhu

. 2.5D large eddy simulation of vertical axis wind turbine in consideration of high angle of attack flow. Renew Energy 2013; 51: 317–330.

10.

Paraschivoiu

. Wind turbine design – with emphasis on Darrieus concept, Montreal, Canada: Polytechnic International Press, 2002.

11.

Armstrong

Fiedler

Tullis

. Flow separation on a high Reynolds number, high solidity vertical axis wind turbine with straight and canted blades and canted blades with fences. Renew Energy 2012; 41: 13–22.

12.

Scheurich

Brown

. Effect of dynamic stall on the aerodynamics of vertical-axis wind turbines. AIAA J 2011; 49: 2511–2521.

13.

Scheurich

Fletcher

Brown

. Effect of blade geometry on the aerodynamic loads produced by vertical-axis wind turbines. Proc IMechE, Part A: J Power and Energy 2011; 225: 327–341.

14.

Islam M. Analysis of fixed-pitch straight-bladed VAWT with asymmetric airfoils. PhD Thesis, University of Windsor, Canada, 2008.

15.

Keinan

. A modified streamtube model for vertical axis wind turbines. Wind Eng 2012; 36: 145–180.

16.

Ferreira CJS. The near wake of the VAWT: 2D and 3D views of the VAWT aerodynamics. PhD Dissertation, Delft University of Technology, the Netherlands, 2009.

17.

Sheldahl RE and Klimas PC. Aerodynamic characteristics of seven symmetrical airfoil sections through 180-degree angle of attack for use in aerodynamic analysis of vertical axis wind turbines. SAND80-2114. Albuquerque, USA: Sandia National Laboratories, 1981.

18.

Yilmaz

Rockwell

. Flow structure on finite-span wings due to pitch-up motion. J Fluid Mech 2012; 691: 518–545.

19.

Kashitani

Miura

Nakao

. Effects of aspect ratio in a transonic shock tube airfoil flow. J Therm Sci 2012; 21: 435–440.

20.

Kirke BK. Evaluation of self-starting vertical axis wind turbines for stand-alone applications. PhD Thesis, Griffith University, Australia, 1998.

21.

Kjellin

Bulow

Eriksson

. Power coefficient measurement on a 12 kw straight bladed vertical axis wind turbine. Renew Energy 2011; 36: 3050–3053.

22.

Akins RE. Measurements of surface pressure on an operating vertical-axis wind turbine. SAND89-7051. Albuquerque, USA: Sandia National Laboratories, 1989.

23.

Farthing

. Vertical axis wind turbine induced velocity vector theory. Proc IMechE, Part A: J Power and Energy 2009; 223: 103–114.

24.

Saeidi

Sedaghat

Alamdari

. Aerodynamic design and economical evaluation of site specific small vertical axis wind turbines. Appl Energy 2013; 101: 765–775.

25.

Kirke

. Optimum matching of non-electrical loads to wind turbines. Proc IMechE, Part A: J Power and Energy 1996; 210: 213–221.

26.

McLaren

Tullis

Ziada

. Measurement of high solidity vertical axis wind turbine aerodynamic loads under high vibration response conditions. J Fluids Struct 2012; 32: 12–26.

27.

Templin RJ. Aerodynamic performance theory for the NRC vertical-axis wind turbine. National Aeronautical Establishment Laboratory Technical Report, LTR-LA-160, 1974. Canada: Ottawa.

28.

Hameed

Afaq

. Design and analysis of a straight bladed vertical axis wind turbine blade using analytical and numerical techniques. Ocean Eng 2013; 57: 248–255.

29.

Castelli

De Betta

Benini

. Effect of blade number on a straight-bladed vertical-axis Darreius wind turbine. World Acad Sci Eng Technol 2012; 61: 305–311.

30.

Kato Y, Seki K and Shimizu Y. Vertical axis type wind power turbine. Patent No. 4,285,636, USA, 1981.

31.

Seki K. Straight wind type wind and water turbine, Patent No. 6,974,309, USA, 2005.

32.

Islam

Ting

DS-K

Fartaj

. Desirable airfoil features for smaller-capacity straight-bladed VAWT. Wind Eng 2007; 31: 165–196.

33.

Hill

Dominy

Ingram

. Darrieus turbines: the physics of self-starting. Proc IMechE, Part A: J Power and Energy 2009; 223: 21–29.

34.

Migliore

. Comparison of NACA 6-series and 4-digit airfoils for Darrieus wind turbine. J Energy 1983; 7: 291–292.

35.

Clausen

Wood

. Research and development issues for small wind turbines. Renew Energy 1999; 16: 922–927.

36.

Sutherland

. A summary of the fatigue properties of wind turbine materials. Wind Energy 2000; 3: 1–34.

37.

Hara

Hayashi

. Moment of inertia dependence of vertical axis wind turbines in pulsating winds. Int J Rotat Mach 2012. article ID 910940, 12 pages.

38.

Hau

. Wind turbines, fundamentals, technologies, application, economics, 3rd ed. Munich: Springer, 2013.

39.

Kim

Chung

Moon

. An analysis of variable-speed wind turbine power-control methods with fluctuating wind speed. Energies 2013; 6: 3323–3338.