An optimization of the star-wheel profile in a single screw compressor

Abstract

Single screw compressors have been used in various industrial fields, but the star-wheel does not have a good durability as expected. Good hydrodynamic lubrication states can enhance the wear resistance of the star-wheel. However, the imbalance of the lubricant film forces which act on the front flank and the back flank of the star-wheel tooth have a great influence on the lubrication between the meshing pair. In order to improve the lubrication, an approach for optimization of the star-wheel profile is developed, and the optimization goal is proposed in this paper. Column envelope profile meshing pair in an oil-flooded single screw compressor is taken as an optimization example. After optimization, the lubrication states in clearance between the groove flanks and the teeth flanks are improved. The meshing pairs with optimal profile are applied in an oil single screw compressor, and the experiment data supports the optimization approach well.

Keywords

Single screw compressor lubricant film force composite torques

Get full access to this article

View all access options for this article.

References

Zimmern B. Worm rotary compressors with liquid joints. Patent no. 3133695, USA, 1965.

Tao

. Simulation of high speed single screw compressor in fuel cell. J Zhejiang Univ 2006; 40(2): 309–312, 333.

Feng

. Column envelope meshing pair and its design method for single screw compressors. J Zhejiang Univ Sci A 2009; 10(1): 31–36.

Zimmern B. Rotary injection worm and worm wheel with specific tooth shape. Patent no. 3932077, USA, 1976.

Jin GX and Tang Y. A study of the single screw compressor profile. In: Proceedings of Purdue compressor technology conference, West Lafayette, IN, USA, 1986, pp.312–320.

Xu J, Feng QK and Wu WF. A new single screw compressor with profiles enveloped by multi-straight lines. In: The 22nd international congress of refrigeration, Beijing, 2007.

Feng

. Multicolumn envelope meshing pair for single screw compressors. J Mech Des 2009; 131: 7–7.

Feng

Liu

. Experimental studies of the tooth wear resistance with different profiles in single screw compressor. Tribol Int 2013; 57: 210–215.

Cameron

. Basic lubrication theory, Brisbane, Queensland, Australia: Jacaranda-Wiley Ltd: Jacaranda Press, 1983, pp. 17–17.

10.

Post W and Zwaans M. Computer simulation of the hydrodynamic lubrication in a single screw compressor. In: Proceedings of Purdue compressor technology conference, West Lafayette, IN, USA, 1986, pp.334–348.

11.

Huang

Meng

. Tribology course, Beijing: China Higher Education Press, 2007, pp. 359–359.

12.

Jisheng

Gawne

. Influence of lubrication regime on the sliding wear behaviour of an alloy steel. Wear 1997; 211: 1–8.

13.

Kim

D-W

Kim

K-W

. Effects of sliding velocity and ambient temperature on the friction and wear of a boundary-lubricated, multi-layered DLC coating. Wear 2014; 315: 95–102.

14.

Larsson

. Modelling the effect of surface roughness on lubrication in all regimes. Tribol Int 2009; 42: 512–516.

15.

Horng JH. Studies of tribological behavior and separation between surfaces at initial boundary lubrication. Wear 1998; 216: 8–14.

16.

Jin

. Study of the profile and hydrodynamic lubrication of a mono-screw compressor. J Xi'an Jiaotong Univ 1982; 06: 80–82.

17.

Lauder

Leschziner

. Flow in finite-width, thrust bearings including inertial effects 1-Laminar Flow. ASME J Lubric Technol 1978; 100: 330–338.

18.

Wu JH and Jin GX. The computer simulation of oil-flooded single screw compressor. In: Proceedings of Purdue compressor technology conference, West Lafayette, IN, USA, 1988, pp.362–368.

19.

Chu

. Shape optimum design of slider bearings using inverse method. Tribol Int 2007; 40: 906–914.

20.

GB/T 15487:1995. Methods of flow measurement for displacement compressor.