The application of novel techniques for gas turbine inlet-cooling that improve both the power and efficiency of the modern commercial steam-air-cooled gas turbine combined cycle power plants in hot and humid climates

Abstract

Increasing ambient temperature significantly reduces the efficiency and power output of the combined cycle power plant. Gas turbine (GT) inlet-cooling decreases air temperature at the inlet of the air compressor; thus, reduces the work of the compressor and increases the mass flow rate and power output. The steam-cooled GT has a higher output per kg of inlet air than the air-cooled GT; therefore, for the same power output, the mass flow rate and as a consequence the cooling load is lower for the steam-cooled GT. Accordingly, the impact of applying GT inlet-cooling on the performance of the combined cycle is expected to be different for the steam-cooled GT from that for the air-cooled GT. For hot and humid climates, the typical GT inlet-cooling techniques of evaporative, inlet-fogging, and desiccant-cooling are not effective while absorption and refrigeration GT inlet-cooling systems consume significant amounts of energy, which influence the efficiency and power output. In this paper, novel GT inlet-cooling techniques that take advantages of the process air and exhaust heat energies are introduced. The commercial STAG 107H steam/air-cooled GT combined cycle with such innovative GT inlet-cooling systems are modeled. The effectiveness of the novel cooling techniques is compared with that of the available GT inlet-cooling systems of inlet-fogging, refrigeration, and absorption. The impacts of varying ambient temperature and relative humidity on the performance of the commercial combined cycle with the different GT inlet-cooling techniques are presented, compared, and the results are discussed. The results indicate that the introduced innovative techniques for GT inlet-cooling are the most suitable for hot and humid climates with improvements of up to 1.2 percentage point in the combined cycle efficiency and 1.4% in the power output when compared with the refrigeration and absorption GT inlet-cooling systems.

Keywords

Desiccant-cooling refrigeration-cooling absorption-cooling improving power improving efficiency performance enhancement

Get full access to this article

View all access options for this article.

References

Ondryas

Daniel

. Go beyond evaporative coolers to stretch gas-turbine output. Power 1991; July: 27–29.

De Lucia

Lanfranchi

Boggio

. Benefits of compressor inlet air cooling for gas-turbine cogeneration plants. In: Proceedings of the international gas turbine and aeroengine congress and exposition, Houston, TX, 5–8 June 1995.

De Lucia

Carnevale

Falchetti

. Performance improvements of a natural-gas injection station using gas-turbine inlet air cooling. In: Proceedings of the international gas turbine and aeroengine congress and exposition, Orlando, FL, 2–5 June 1997.

Bassily

. Effects of evaporative inlet and aftercooling on the recuperated gas-turbine cycle. Appl Therm Eng 2001; 21(18): 1875–1890.

Van Der Linden

Searies

. Inlet conditioning enhances performance of modern combined cycle plants for cost-effective power generation. In: International gas turbine and aeroengine congress & exhibition, Birmingham, UK, 10–13 June 1996.

Bassily

. Performance improvements of the intercooled reheat regenerative gas-turbine cycles using indirect evaporative cooling of the inlet air and evaporative cooling of the compressor discharge. Proc IMechE Part A, J Power and Energy 2001; 215(A5): 545–557.

Bassily

. Performance improvements of the intercooled reheat recuperated gas-turbine cycle using absorption inlet-cooling and evaporative after-cooling. Appl Energy 2004; 77: 249–272.

Hufford

. Absorption chillers improve cogeneration energy efficiency. ASHRAE J 1992; March: 46–53.

Ondryas

Wilson

Kawamoto

. Options in gas turbine power augmentation using inlet air chilling. J Eng Gas Turbines Power 1991; 113(4): 203–211.

10.

Barolini

Salvi

. Performance assessment of steam injection gas turbine with inlet air cooling. In: Proceedings of the international gas turbine and aeroengine congress and exposition, Orlando, FL, 2–5 June 1997.

11.

Bassily

. Performance improvements of the recuperated gas-turbine cycle using absorption inlet cooling and evaporative aftercooling. Proc IMechE, Part A: J Power and Energy 2002; 216(A4): 294–306.

12.

Yang

Cai

. Analytical method for evaluation of gas turbine inlet air cooling in combined cycle power plant. Appl Energy 2009; 86(6): 848–856.

13.

Zadpoor

Nikooyan

. Development of an improved desiccant-based evaporative cooling system for gas turbine. In: ASME turbo expo 2008: land, sea, and air (GT2008), Berlin, Germany, 9–13 June 2008.

14.

Jalalzadeh-Azar

Stayzak

Judkoff

. Performance assessment of a desiccant cooling system in CHP application incorporating an IC engine. Int J Distributed Energy Resources 2005; 1(2): 1614–7138.

15.

Chase

Kehoe

. GE combined-cycle product line and performance. Report GER-3574g, Schenectady, NY: GE Power Systems, 2000.

16.

Matta

Mercer

Tuthill

. Power systems for the 21^st century-“H” gas turbine combined-cycles. Report GER-3935b (10/00), Schenectady, NY: GE Power Systems, 2000.

17.

Kail

. Evaluation of advanced combined cycle power plants. Proc IMechE, Part A: J Power and Energy 1998; 212(A1): 1–12.

18.

Tsukagoshi

Maekawa

Ito

. Trial operation results of steam cooled M501H type gas turbine. Mitsubishi Heavy Industries, Ltd. Technical Review 2002; vol. 39(3).

19.

Eldrid

Kaufman

Marks

. The 7FB: the next evolution of the F gas turbine report GER-4194 (04/01), Schenectady, NY: GE Power Systems, 2001.

20.

Kalyanaraman

. Breaking the efficiency barrier. Turbomachinery Int 2009, pp. 14–16.

21.

Bassily

. Modeling, analysis, and modifications of different GT cooling techniques for modern commercial combined cycle power plants with reducing the irreversibility of the HRSG. Appl Thermal Eng J 2013; 53: 131–146.

22.

Seader

Henley

. Separation process principles, New York, NY: John Wiley & Sons, Inc., 1998, pp. 270–275.

23.

Chaker

. Inlet fogging of gas turbine engines detailed climatic analysis of gas turbine evaporative cooling potential in the USA. In: Proceedings of ASME Turbo Expo 2001, New Orleans, LA, 4–7 June 2001.

24.

Hodge

. Analysis and design of energy systems, 2nd ed. New Jersey: Prentice Hall, Inc, 1990, pp. 294–305.

25.

Incropera

DeWitt

. Fundamentals of heat and mass transfer, 4th ed. New York, NY: John Wiley & Sons, Inc., 1996, pp. 602–604.

26.

Novel Aire Technologies. www.novelaire.com.

27.

Bassily

. Numerical cost optimization and irreversibility analysis of the triple-pressure reheat steam-air cooled GT commercial combined cycle power plants. Appl Thermal Eng J 2012; 40: 145–160.

28.

Chiesa

Macchi

. A thermodynamic analysis of different options to break 60% electric efficiency in combined cycle power plants. J Eng Gas Turbines Power 2004; 126: 770–785.

29.

Yadav

Kumar

Saraswati

. Comparative thermodynamic analysis of combined and steam injected gas turbine cycles. In: Proceedings of 2003 international joint power generation conference, Atlanta, GA, 16–19 June 2003.

30.

Cohen

Roger

Saravanamottoo

. Gas-turbine theory, 4th ed. New York, NY: Prentice-Hall, 1996, pp. 50–53. 222–230, 340–350.

31.

Sonntag

Borgenakke

Van Wylen

. Fundamentals of thermodynamics, 5th ed. New York, NY: John Wiley & Sons, Inc., 1998, pp. 356–357. 380–385.

32.

Moran

Shaipro

. Fundamentals of engineering thermodynamics, 6th ed. New York, NY: John Wiley & Sons, 2008, pp. 294–306. 861.

33.

Herold

Radermacher Klein

. Absorption chillers & heat pumps, 1st ed. New York, NY: CRC Press, 1995, pp. 100–150.

34.

Wang

Chua

. Absorption cooling: a review of lithium bromide-water chiller technologies. Recent Patents Mech Eng 2009; 2(3): 193–213.

35.

Jones C and Jacobos III JA. Economic & technical considerations for combined cycle performance-enhancement options. GE Power Systems report, GER-4200.

36.

Komuro

Ito

Sonoda

. Power output augmentation of gas turbine combined cycle by inlet-air cooling system of chiller type under high ambient temperature. Mitsubishi Heavy Industries Technical Review 2010; 47(4)): December, 2010.

37.

Hosseini

Beshkani

Soltani

. Performance improvement of gas turbines of Fars (Iran) combined cycle power plant by inlet air cooling using a media evaporative cooler. Energy Conversion Manag 2007; 48: 1055–1064.