Analysis of performance of two-stage screw compressor under various operating conditions

Abstract

The screw compressor has a promising application in the process industry due to its appropriate pressure and flow rate. In this paper, a mathematical model of a two-stage oil-free screw compressor is developed to simulate the working process under various operating conditions. The results show that the interstage pressure of the two-stage oil-free screw compressor is built automatically depending on the equal mass flow rate of each stage. It increases with the suction pressure, discharge pressure, and clearance, but decreases with rotating speed. Although the power consumption of the 2nd stage decreases with the suction pressure, the power consumption of the whole compressor always increases with the suction pressure, discharge pressure, rotating speed, and clearance. The volumetric efficiency increases with the suction pressure and rotating speed, but decreases with the discharge pressure and clearance for each stage. The indicated efficiency increases with the rotating speed but decreases with the clearance. A maximum indicated efficiency is found. The volumetric and indicated efficiency of the 2nd stage is more sensitive to the operating condition than that of the 1st stage.

Keywords

Screw compressor two-stage performance simulation

Get full access to this article

View all access options for this article.

References

Seshaiah

Subrata

Sahoo

. Mathematical modeling of the working cycle of oil injected rotary twin screw compressor. Appl Therm Eng 2007; 27: 145–155.

Seshaiah

Sahoo

Sarangi

. Theoretical and experimental studies on oil injected twin-screw air compressor when compressing different light and heavy gases. Appl Therm Eng 2010; 30: 327–339.

Peng

Xing

. Experimental study on p-V indicator diagrams of twin-screw refrigeration compressor with economizer. Appl Therm Eng 2004; 24: 1491–1500.

Xing

. Theoretical and experimental research on the working process of screw refrigeration compressor under superfeed condition. Int J Refrig 2007; 30: 1329–1335.

Hsieh

Shih

Hsieh

. Calculation of temperature distributions in the rotors of oil-injected screw compressors. Int J Therm Sci 2011; 50: 1271–1284.

Liu

Wang

. A new model of screw compressor for refrigeration system simulation. Int J Refrig 2012; 35: 861–870.

Stosic

. On heat transfer in screw compressor. Int J Heat Fluid Flow 2015; 51: 285–297.

Chen

Xing

Tang . Theoretical and experimental investigation on the performance of screw refrigeration compressor under part-load conditions. Int J Refrig 2011; 34: 1141–1150.

Kovacevic

Stosic

Smith

. Numetrical simulation of combined screw compressor-expander machines for use in high pressure refrigeration systems. Simul Model Pract Theory 2006; 14: 1143–1154.

10.

Y-R

Fong

Z-H

. Optimization design of an explicitly defined rack for the generation of rotors for twin-screw compressors. Mech Mach Theory 2009; 44: 66–82.

11.

Y-R

Fong

Z-H

. Improved rotor profiling based on the arbitrary sealing line for twin-screw compressors. Mech Mach Theory 2008; 43: 695–711.

12.

Rane

Kovacevic

Stosic

. Grid deformation strategies for CFD analysis of screw compressors. Int J Refrig 2013; 36: 1883–1893.

13.

Rane

Kovacevic

Stosic

. Deforming grid generation and CFD analysis of variable geometry screw compressors. Comput Fluids 2014; 99: 124–141.

14.

Ziwen

. Screw compressor-theory, design and application, 1st ed. Beijing: China Machine Press, 2000.

15.

Xing

Shu

. Theoretical and experimental study on indicator diagram of twin screw refrigeration compressor. Int J Refrig 2004; 27: 331–338.

16.

Gao

Zhao

. Research on a scroll expander used recovering work in a fuel cell. Int J Thermodynamics 2004; 7: 1–8.