An analysis on the flow characteristics of bi-directional axial-flow pump under reverse operation

Abstract

When the conventional bent guide vanes are applied to the bi-directional axial-flow pump, its performance declines considerably under reverse operation. Regarding a bi-directional axial-flow pump with high specific speed as the object of study, the variation of both hydraulic performance and internal flow field under reverse operation are analyzed in this paper. The results indicate that both the head and efficiency of the pump will drop greatly and the optimum operating point lean to the lower flow rate when it operates in the reverse direction, mainly due to the prewhirl caused by the guide vanes; the shedding vortex is formed after flow separation occurred near the trailing edge of blade, and its scale keeps increasing in the diffusing pipe during its motion until it collapses in the straight pipe, which is the major causes of the big flow loss and significant decline of the performance under reverse operation.

Keywords

Axial-flow pump guide vane boundary layer separation vortex airfoil

Get full access to this article

View all access options for this article.

References

Guan

. Axial-flow pump and mixed flow pump, Beijing: Astronautic Publishing House, 2009.

Yang

Jin

Liu

. Numerical analysis and performance test on diving tubular pumping system with symmetric aerofoil blade. Trans Chin Soc Agric Eng 2012; 28: 60–67.

Cheng

Liu

Tang

. Numerical simulation and performance prediction of reversible pump with symmetric aerofoil. Trans Chin Soc Agric Mach 2004; 35: 78–81.

Zhang

Shi

Chen

. Unsteady flow analysis and experimental investigation of axial-flow pump. J Hydrodyn 2010; 22: 35–43.

Muggli

Peter

Philippe

. CFD calculation of a mixed flow pump characteristic from shutoff of maximum flow. J Fluids Eng 2002; 124: 798–802.

Yuan

. Numerical and experimental analysis of flow phenomena in a centrifugal pump operating under low flow rates. ASME J Fluids Eng 2015; 137: 011102–1-011102-12.

Stickland

Scanlon

Fernandez-Francos

. A numerical and experimental analysis of flow in a centrifugal pump. Am Soc Mech Engrs 2002; 257: 703–708.

Muggli

Holbein

Dupont

. CFD calculation of a mixed flow pump characteristic from shutoff to maximum flow. ASME J Fluids Eng 2002; 124: 798–802.

Yuan

Pan

. Realization and application evaluation of near-wall mesh in centrifugal pumps. Trans Chin Soc Agric Eng 2012; 28: 67–72.

10.

Bozorgi

Javidpour

Riasi

. Numerical and experimental study of using axial pump as turbine in Pico hydropower plants. Renew Energy 2013; 53: 258–264.

11.

ANSYS Inc. Theory reference. South Pointe, 2012.

12.

Wang

Zhang

. Some key issue of unsteady turbulent numerical simulation in axial-flow pump. Chin J Mech Eng 2008; 44: 73–77.

13.

Derakhshan

Nourbakhsh

. Theoretical, numerical and experimental investigation of centrifugal pumps in reverse operation. Exp Therm Fluid Sci 2008; 32: 1620–1627.

14.

Pavesi

Cavazzini

Ardizzon

. Time–frequency characterization of the unsteady phenomena in a centrifugal pump. Int J Heat Fluid Flow 2008; 29: 1527–1540.

15.

Hunt JCR, Wray AA and Moin P. Eddies, streams, and convergence zones in turbulent flows. In: Proceedings of the 2nd studying turbulence using numerical simulation databases, Stanford, CA, 1988, pp.193–208.

16.

Jeong

Hussain

. On the identification of a vortex. J Fluid Mech 1995; 285: 69–94.