Automatic optimization of a centrifugal pump based on impeller

Abstract

In this study, a centrifugal pump has been optimized using the genetic algorithm coupled with computational fluid dynamics considering the flow physics for various impeller–diffuser configurations. During the automatic optimization process, the population was selected from a pool of pump geometries generated by four design variables; namely the relative diffuser vane angle, number of diffuser vanes, number of impeller blades, and the impeller wrap angle. The genetic algorithm was combined with a flow solver and a computer aided design software which was used also to create the mesh for the generated geometry. Two objective functions were adopted for the optimization: maximum pressure increase and minimum relative flow angle, which is an indication of reverse flow in the impeller. The iteration history of the optimization for the design (2.4 kg/s) and off-design (3.6 kg/s) flow rate showed that the optimization has been converged to an impeller–diffuser configuration within approximately 250 computational fluid dynamics analyses. Three geometries from each optimization with the highest pressure increase were studied for various mass flow rates and the results were compared with those of the original pump. The results show that the first optimization indicates a significant improvement of pressure increase at design flow rate (15.5%) but decrease at larger flow rates. The second optimization which was required after the results of the first optimization enhanced the head for the entire mass flow rates with an average increase of 25.74%.

Keywords

Computational fluid dynamics genetic algorithm centrifugal pump impeller–diffuser interaction automatic optimization

Get full access to this article

View all access options for this article.

References

Lobanoff

Ross

. Centrifugal pumps: Design and application, 2nd ed. Houston, TX: Gulf Professional Publishing, 1992.

Gülich

. Centrifugal pumps, New York: Springer, 2008.

Gen

. Introduction to evolutionary algorithms, New York: Springer, 2010.

Oyama

Liou

. Multiobjective optimization of rocket engine pumps using evolutionary algorithm. J Propul Power 2002; 18: 528–535.

Demeulenaere A, Purwanto A, Ligout A, et al. Design and optimization of an industrial pump: Application of genetic algorithm and neural network. In: Proceedings of ASME fluid engineering summer conference, Houston TX, USA, pp.1519–1527.

Grapsas

Stametelos

Anagnostopoulos

et al.

Numerical study and optimal blade design of a centrifugal pump by evolutionary algorithms. Lecture Notes in Computer Science. 5178: 26–33.

Anagnostopoulos

. A fast numerical method for flow analysis and blade design in centrifugal pump impellers. Comput Fluids 2009; 38: 284–289.

Derakhshan

Mohammadi

Nourbakhsh

. The comparison of incomplete sensitivities and genetic algorithms applications in 3D radial turbomachinery blade optimization. Comput Fluids 2010; 39: 2022–2029.

Derakhshan

Pourmahdavi

Abdolahnejad

et al.

Numerical shape optimization of a centrifugal pump impeller using artificial bee colony algorithm. Comput Fluids 2013; 81: 145–151.

10.

Safikhani

Khalkhali

Farajpoor

. Pareto based multi-objective optimization of centrifugal pumps using CFD, neural networks and genetic algorithms. Eng Appl Comput Fluid Mech 2014; 5: 37–48.

11.

Zhou

Zhang

et al.

The optimal hydraulic design of centrifugal impeller using genetic algorithm with BVF. Int J Rotat Mach 2014; 2014: 845302.

12.

Zhang

et al.

Multi-objective optimization of double suction centrifugal pump using Kriging metamodels. Adv Eng Softw 2014; 74: 16–26.

13.

Heo

Shim

et al.

High-efficiency design optimization of a centrifugal pump. J Mech Sci Technol 2016; 30: 3917–3927.

14.

Zhou

Shi

. Performance optimization in a centrifugal pump impeller by orthogonal experiment and numerical simulation. Adv Mech Eng 2013; 5: 1–7.

15.

Sinha

Pinarbasi

Katz

. The flow structure during onset and developed states of rotating stall within a vaned diffuser of a centrifugal pump. J Fluids Eng 2001; 123: 490–499.

16.

Gambit 2.4 user guide. Lebanon, PA: Fluent Inc., 2001.

17.

Fluent 6.3 user guide. Lebanon, PA: Fluent Inc., 2001.

18.

Chorin

. Numerical solution of the Navier–Stokes equations. Math Comput 1968; 22: 745.

19.

Issa

. Solution of implicitly discretized fluid flow equations by operator splitting. J Comput Phys 1986; 62: 40–65.

20.

Patankar

. Numerical heat transfer and fluid flows, Washington, DC: Hemisphere Publishing Corporation, 1980.

21.

Deep

Singh

Kansal

et al.

A real coded genetic algorithm for solving integer and mixed integer optimization problems. Appl Math Comput 2009; 212: 505–518.

Automatic optimization of a centrifugal pump based on impeller–diffuser interaction

Abstract

Keywords

Get full access to this article

References