Numerical investigation of heat transfer and friction characteristics for turbulent flow in various corrugated tubes

Abstract

Thermal and hydraulic characteristics of turbulent water flow in a transverse corrugated tube with various corrugation direction (inward/outward) and corrugation shape (triangle, curve, rectangle, and trapezoid) are numerically investigated. The axisymmetric model of corrugated tubes with 10 mm inner diameter was investigated by changing the geometrical parameters for Reynolds number ranging from 5000 to 61,000 and constant heat flux boundary condition. Structured, nonuniform grid system is applied. Momentum, continuity, and energy equations were treated by means of a finite volume method using the SIMPLE scheme with the k–ε turbulence model and enhanced wall treatment. The results reveal that corrugation direction and corrugation shape have perceptible effects upon the heat transfer in the form of Nusselt number (Nu) and pressure drop in the form of friction factor (ƒ). The average Nu for (inward) trapezoidal, rectangular, curved, and triangular corrugation shapes are 52.61%, 50.12%, 47.82%, and 44.96%, respectively, higher than the smooth tube. The average Nu for (outward) trapezoidal, curved, triangular, and rectangular corrugation shapes are 48.31%, 45.72%, 41.23%, and 40.94%, respectively, which are higher than a smooth tube. The results reveal that both inward/outward curved and triangular roughness shape have the superior performance evaluation criterion than rectangular and trapezoidal. Turbulence kinetic energy contour shows the increase in heat transfer performance for all corrugated tubes compared with a smooth tube. Inward corrugated tube provides the highest turbulence kinetic energy along the tube length and, consequently, the highest heat transfer. In addition, inward corrugated tubes provide the highest values and homogeneity of the velocity distribution along the core of tubes.

Keywords

Computational fluid dynamics friction factor Nusselt number corrugated tube rib performance evaluation criterion turbulence kinetic energy

Get full access to this article

View all access options for this article.

References

Thianpong

Eiamsa-ard

Wongcharee

et al.

Compound heat transfer enhancement of a dimpled tube with a twisted tape swirl generator. Int Commun Heat Mass Transf 2009; 36: 698–704.

Vanaki

Mohammed

. Numerical study of nanofluid forced convection flow in channels using different shaped transverse ribs. Int Commun Heat Mass Transf 2015; 67: 176–188.

Zimparov

. Enhancement of heat transfer by a combination of a single-start spirally corrugated tubes with a twisted tape. Exp Therm Fluid Sci 2002; 25: 535–546.

Mohammed

Abbas

Sheriff

. Influence of geometrical parameters and forced convective heat transfer in transversely corrugated circular tubes. Int Commun Heat Mass Transf 2013; 44: 116–126.

Webb

Kim

. Enhanced heat transfer, New York: Taylor & Francis, 2005.

Dipprey

Sabersky

. Heat and momentum transfer in smooth and rough tubes at various prandtl numbers. Int J Heat Mass Transf 1963; 6: 329–353.

Webb

Eckert

ERG

Goldstein

. Heat transfer and friction in tubes with repeated-rib roughness. Int J Heat Mass Transf 1971; 14: 601–617.

Kiml

Magda

Mochizuki

et al.

Rib-induced secondary flow effects on local circumferential heat transfer distribution inside a circular rib-roughened tube. Int J Heat Mass Transf 2004; 47: 1403–1412.

San

Huang

. Heat transfer enhancement of transverse ribs in circular tubes with consideration of entrance effect. Int J Heat Mass Transf 2006; 49: 2965–2971.

10.

Bilen

Cetin

Gul

et al.

The investigation of groove geometry effect on heat transfer for internally grooved tubes. Appl Therm Eng 2009; 29: 753–761.

11.

Stel

Morales

REM

Franco

et al.

Numerical and experimental analysis of turbulent flow in corrugated pipes. J Fluids Eng 2010; 132: 71203.

12.

Meng

. Roughness enhanced mechanism for turbulent convective heat transfer. Int J Heat Mass Transf 2011; 54: 1775–1781.

13.

Naphon

Nuchjapo

Kurujareon

. Tube side heat transfer coefficient and friction factor characteristics of horizontal tubes with helical rib. Energy Convers Manage 2006; 47: 3031–3044.

14.

Meng

. Experimental study of single-phase pressure drop and heat transfer in a micro-fin tube. Exp Therm Fluid Sci 2007; 32: 641–648.

15.

Pethkool

Eiamsa-ard

Kwankaomeng

et al.

Turbulent heat transfer enhancement in a heat exchanger using helically corrugated tube. Int Commun Heat Mass Transf 2011; 38: 340–347.

16.

Zachár

. Analysis of coiled-tube heat exchangers to improve heat transfer rate with spirally corrugated wall. Int J Heat Mass Transf 2010; 53: 3928–3939.

17.

Ağra

Demir

Atayılmaz

ŞÖ

et al.

Numerical investigation of heat transfer and pressure drop in enhanced tubes. Int Commun Heat Mass Transf 2011; 38: 1384–1391.

18.

Manca

Nardini

Ricci

. Numerical analysis of water forced convection in channels with differently shaped transverse ribs. J Appl Math 2011, pp. 1–25.

19.

Eiamsa-ard

Promvonge

. Numerical study on heat transfer of turbulent channel flow over periodic grooves. Int Commun Heat Mass Transf 2008; 35: 844–852.

20.

Zhang

Tao

et al.

Numerical investigation on flow and heat transfer characteristics of corrugated tubes with non-uniform corrugation in turbulent flow. Chinese J Chem Eng 2017; 26: 437–444.

21.

Vatani

Mohammed

. Turbulent nanofluid flow over periodic rib-grooved channels. Eng Appl Comput Fluid Mech 2013; 7: 369–381.

22.

Launder

Spalding

. The numerical computation of turbulent flows. Comput Methods Appl Mech Eng 1974; 3: 269–289.

23.

Ansys AF. 14.0 Theory guide. Canonsburg, PA: ANSYS Inc., 2011.

24.

FLUENT

. FLUENT 6.3 user's guide, Lebanon, NH: Fluent Inc., 2006.

25.

Gee

Webb

. Forced convection heat transfer in helically rib-roughened tubes. Int J Heat Mass Transf 1980; 23: 1127–1136.

26.

Sieder

Tate

. Heat transfer and pressure drop of liquids in tubes. Ind Eng Chem 1936; 28: 1429–1435.

27.

Gnielinski

. New equations for heat and mass transfer in turbulent pipe and channel flow. Int Chem Eng 1976; 16: 359–368.

28.

Wang

Y-L

et al.

Heat transfer and friction characteristics for turbulent flow of dimpled tubes. Chem Eng Technol 2009; 32: 956–963.

29.

Petukhov

. Heat transfer and friction in turbulent pipe flow with variable physical properties. In: Advances in heat transfer, New York: Elsevier, 1970, pp. 503–564.

30.

Incropera

DeWitt

Bergman

et al.

Fundamental of heat and mass transfer, New York: John-Wiley & Sons Inc., 2006.

31.

Han

H-Z

B-X

B-Y

et al.

Numerical study of flow and heat transfer characteristics in outward convex corrugated tubes. Int J Heat Mass Transf 2012; 55: 7782–7802.

32.

Tang

Dai

Zhu

. Experimental and numerical investigation of convective heat transfer and fluid flow in twisted spiral tube. Int J Heat Mass Transf 2015; 90: 523–541.