Optimal hydraulic design of an ultra-low specific speed centrifugal pump based on the local entropy production theory

Abstract

The ultra-low specific speed centrifugal pump has been widely applied in aerospace engineering, metallurgy, and other industrial fields. However, its hydraulic design lacks specialized theory and method. Moreover, the impeller and volute are designed separately without considering their coupling effect. Therefore, the optimal design is proposed in this study based on the local entropy production theory. Four geometrical parameters are selected to establish orthogonal design schemes including blade outlet setting angle, wrapping angle volute inlet width, and throat area. Subsequently, a 3D steady flow with Reynolds stress turbulent model and energy equation model is numerically conducted and the entropy production is calculated by a user-defined function code. The range analysis is made to identify the optimal scheme indicating that the combination of local entropy production and orthogonal design is feasible on pump optimization. The optimal pump is visibly improved with an increase of 1.08% in efficiency. Entropy production is decreased by 16.75% and 6.03% in impeller and volute, respectively. High energy loss areas are captured and explained in terms of helical vortex and wall friction, and the turbulent and wall entropy production are respectively reduced by 3.82% and 14.34% for the total pump.

Keywords

Local entropy production optimal hydraulic design energy loss ultra-low specific speed centrifugal pump numerical simulation

Get full access to this article

View all access options for this article.

References

Zhi'an

. Numerical simulation research of the flow in the centrifugal pump, Qingdao: China University of Petroleum (EastChina), 2009.

Tian

. Impact of impeller type on performance of high-speed centrifugal pumps with ultra-low specific-speed. J Lanzhou Univ Technol 2009; 35: 46–50.

Liu

. Study on super-low specific speed centrifugal pump. Mech Eng Autom 2008; 147: 198–200.

Liu

. Investigation of centrifugal pump used as aeroengine main fuel pump. Aeroengine 2006; 32: 43–45.

Guo

Bai

. Optimal design of ultra-low specific speed centrifugal pump for LRE. J Rocket Propul 2011; 37: 19–23.

. Bearing failure analysis and force balance of super-low specific speed canned motor pump. Petro-Chemical Equip Technol 2007; 28: 31–34.

Zhang

Shi

Chen

, et al. Experiment and impeller and volute matching optimization of high-head submersible sewage pump. Trans Chinese Soc Agric Eng 2013; 29: 78–85.

Zhou

Zhang

, et al. The optimal hydraulic design of centrifugal impeller using genetic algorithm with BVF. Int J Rotat Mach 2014: 1–14.

Zhang

Pan

, et al. Numerical investigation of blade dynamic characteristics in an axial flow pump. Therm Sci 2013; 17: 1511–1514.

10.

Hou

Zhang

, et al. Optimization design of inlet guide vane in a centrifugal pump based on orthogonal method. J Eng Thermophys 2015; 36: 2618–2623.

11.

Wang

Shi

Jiang

, et al. Optimization design of multistage centrifugal pump impeller by orthogonal experiment and CFD. J Drain Irrig Mach Eng 2016; 34: 003.

12.

Xu Y, Tan L, Cao SL, et al. Multiparameter and multiobjective optimization design of centrifugal pump based on orthogonal method. Proc IMechE, Part C: J Mechanical Engineering Science 2016; 231: 2569–2579.

13.

Pei

Yin

Yuan

, et al. Cavitation optimization for a centrifugal pump impeller by using orthogonal design of experiment. Chinese J Mech Eng 2017; 30: 103–109.

14.

Bejan

. Advanced engineering thermodynamics, New York: Wiley & Sons, 1977.

15.

Kock

Herwig

. Local entropy production in turbulent shear flows: a high-Reynolds number model with wall function. Int J Heat Mass Transfer 2004; 47: 2205–2215.

16.

Kock

Herwig

. Entropy production calculation for turbulent shear flows and their implementation in CFD codes. Int J Heat Fluid Flow 2005; 26: 672–680.

17.

Herwig

Kock

. Local entropy production in turbulent shear flows: a tool for evaluating heat transfer performance. J Therm Sci 2006; 15: 159–167.

18.

Duan

, et al. The flow pattern and entropy generation in an axial inlet cyclone with reflux cone and gaps in the vortex finder. Powder Technol 2016; 303: 192–202.

19.

Duan

, et al. Entropy generation analysis on cyclone separators with different exit pipe diameters and inlet dimensions. Chem Eng Sci 2015; 138: 622–633.

20.

Hou

Zhang

. A numerically research on energy loss evaluation in a centrifugal pump system based on local entropy production method. Therm Sci 2017; 21: 1287–1299.

21.

Zhang

Hou

, et al. Application of entropy production method on a centrifugal pump energy loss assessment. J Drain Irrig Mach Eng 2017; 4: 277–282.

22.

Hou

Zhang

, et al. Numerical analysis of entropy production on a LNG cryogenic submerged pump. J Natural Gas Sci Eng 2016; 36: 87–96.

23.

Pei

Meng

, et al. Effects of distance between impeller and guide vane on losses in a low head pump by entropy production analysis. Adv Mech Eng 2016; 8: 1687814016679568.

24.

Kim

Lee

Kim

, et al. Design techniques to improve the performance of a centrifugal pump using CFD. J Mech Sci Technol 2015; 29: 215–225.

25.

Shi W, Long F, Li Y, et al. Non-overload design of low specific speed submersible pump. In: ASME 2010 3rd joint US-European fluids engineering summer meeting collocated with 8th international conference on nanochannels, microchannels, and minichannels. New York: American Society of Mechanical Engineers, 2010, pp.563–567.

26.

Jin

Kim

Son

, et al. Spiral casing of a volute centrifugal pump-effects of the cross sectional shape. KSFM J Fluid Mach 2013; 16: 28–34.

27.

Yang

Kong

Chen

. Research on pump volute design method using CFD. Int J Rotat Mach 2011: 1–7.

28.

Yin

, et al. Effect of abnormal blade incidence on internal entropy generation in axial-flow fans. J Chinese Soc Power Eng 2012; 32: 947–953.

29.

Hou

Zhang

, et al. A CFD study of IGV vane number on hydraulic characteristics and pressure pulsation of an is centrifugal pump. J Vibroeng 2017; 19: 23–39.

30.

Duan

. Application of entropy generation method for analyzing energy loss of cyclone separator. CIESC J 2014; 65: 583–592.

31.

Zhang

, et al. Quasi-3D hydraulic design in the application of an LNG cryogenic submerged pump. J Natural Gas Sci Eng 2016; 29: 89–100.