In this research work, a computational modeling of multi-phase flow through an asymmetric exhaust hood is presented. The three-dimensional Navier–Stokes equations along with the standard turbulent model and the Eulerian–Eulerian multi-phase equations were solved. The coupling of the last stage turbine blades and the exhaust hood has been carried out using the actuator disc model, which is less computationally demanding. The finite volume-based commercial computational fluid dynamics solver, ANSYS FLUENT, is used for the present numerical simulations. The effects of wetness on the flow structure and the pressure recovery capacity of a steam turbine exhaust hood have been investigated. One of the salient findings is that the pressure recovery capacity of a steam turbine exhaust hood enhances due to wetness effects. Wetness-induced turbulence damping is noted to be playing a crucial role in the enhancement of pressure recovery capacity of an exhaust hood.
WangHZhuXDuZ. Aerodynamic optimization for low pressure turbine exhaust hood using Kriging surrogate model. Int Commun Heat Mass Transfer2010; 37: 998–1003.
2.
Tanuma T, Sasao Y, Yamamoto S, et al. Aerodynamic interaction effects from upstream and downstream on the down-flow type exhaust diffuser performance in a low pressure steam turbine. In: ASME turbo expo 2013: turbine technical conference and exposition. USA: American Society of Mechanical Engineers Digital Collection, 2013.
3.
CaoLLiuJLiY, et al.3D numerical analysis of wet steam flow in exhaust hoods of steam turbines. Zhongguo Dianji Gongcheng Xuebao, Proc Chinese Soc Electr Eng2012; 32: 79–86.
4.
KuXHagmeijerR. A new reduced model for the moments of droplet size distribution in condensing flow. Int J Numer Methods Heat Fluid Flow2015; 25: 320–332.
5.
GerberAGKermaniMJ. A pressure based Eulerian–Eulerian multi-phase model for non-equilibrium condensation in transonic steam flow. Int J Heat Mass Transfer2004; 47: 2217–2231.
6.
AvetissianARPhilippovGAZaichikLI. Effects of turbulence and inletspontspmoisture on two-phase spontaneously condensing flows in transonic nozzles. Int J Heat Mass Transfer2008; 51: 4195–4203.
7.
DykasSWróblewskiW. Two-fluid model for prediction of wet steam transonic flow. Int J Heat Mass Transfer2013; 60: 88–94.
8.
BurtonZIngramGLHoggS. A literature review of low pressure steam turbine exhaust hood and diffuser studies. J Eng Gas Turbines Power2013; 135: 062001–062001.
9.
Tanuma T, Sasao Y, Yamamoto S, et al. Numerical investigation of steam turbine exhaust diffuser flows and their three dimensional interaction effects on last stage efficiencies. In: ASME turbo expo 2014: turbine technical conference and exposition, 2014, pp.V01BT27A039–V01BT27A039. USA: American Society of Mechanical Engineers.
10.
TindellRHAlstonTMSarroCA, et al.Computational fluid dynamics analysis of a steam power plant low-pressure turbine downward exhaust hood. J Eng Gas Turbines Power1996; 118: 214–224.
11.
VeerabathraswamyKKumarAS. Effective boundary conditions and turbulence modeling for the analysis of steam turbine exhaust hood. Appl Therm Eng2016; 103: 773–780.
12.
Burton Z, Hogg S and Ingram G. A generic low pressure exhaust diffuser for steam turbine research. In: ASME turbo expo 2012: turbine technical conference and exposition, 2012, pp.455–466. USA: American Society of Mechanical Engineers.
13.
CaoLSiHLinA, et al.Multi-factor optimization study on aerodynamic performance of low-pressure exhaust passage in steam turbines. Appl Therm Eng2017; 124: 224–231.
14.
Fan T, Xie Y, Zhang D, et al. A combined numerical model and optimization for low pressure exhaust system in steam turbine. In: ASME 2007 power conference, 2007, pp.349–358. USA: American Society of Mechanical Engineers.
15.
FuJLiuJZhouS. Experimental and numerical investigation of interaction between turbine stage and exhaust hood. Proc IMechE, Part A: J Power and Energy2007; 221: 991–999.
16.
Burton Z, Ingram G and Hogg S. A novel method of coupling the steam turbine exhaust hood and the last stage blades using the non-linear harmonic method. In: ASME turbo expo 2013: turbine technical conference and exposition, 2013, pp.V05BT25A006–V05BT25A006. USA: American Society of Mechanical Engineers.
17.
LiuJJHynesTP. The investigation of turbine and exhaust interactions in asymmetric flows – blade-row models applied. J Turbomach2003; 125: 121–127.
18.
SadasivanSArumugamSKAggarwalMC. Numerical simulation of diffuser of a gas turbine using the actuator disc model. J Appl Fluid Mech2019; 12: 77–84.
19.
GirshickSLChiuCP. Kinetic nucleation theory: a new expression for the rate of homogeneous nucleation from an ideal supersaturated vapor. J Chem Phys1990; 93: 1273–1277.
20.
FrenkelJ. Kinetic theory of liquids1955; vol. 8New York: Dover Publications, pp. 143–143.
21.
GyarmathyG. The spherical droplet in gaseous carrier streams: review and synthesis. Multiphase Sci Technol1982; 1: 1–4.
22.
Moore MJ, Walters PT, Crane RI, et al. Predicting the fog drop size in wet steam turbines. In: Wet steam 4 conference. UK: Institute of Mechanical Engineers, paper C37/73.
23.
Burton Z. Analysis of low pressure steam turbine diffuser and exhaust hood systems. Doctoral Dissertation, Durham University, 2014.
24.
GardzilewiczASwirydczukJBadurJ, et al.Methodology of CFD computations applied for analysing flows through steam turbine exhaust hoods. Trans Inst Fluid-flow Mach2003; 113: 157–168.
25.
Crowe CT. Modeling turbulence in multiphase flows. In: Rodi W and Martelli F (eds) Engineering turbulence modelling and experiments. Amsterdam: Elsevier, 1993, pp.899–913.
