A numerical investigation of the effect of vaned diffuser water cooling on the internal flow field of a centrifugal compressor

Abstract

Due to their high pressure rises, the gas temperature of high-speed centrifugal compressors can be very high to the detriment of compressor aerodynamic performance. A water-cooled vaned diffuser technique is proposed to alleviate this problem. Compressor housing integrated water-cooling passages are employed to introduce cooling water to the vanes through holes near the vane centre. The technique was applied to a 180 mm turbocharger compressor running at the tip speed of 452 m/s, and numerical studies with conjugate heat transfer and fluid-structure thermal interaction were carried out to find the effects of the cooling to compressor performance and the mechanical stress of diffuser vanes. The results show that compressor efficiency is improved by the cooling, and the improvement increases as compressor mass flow reduces. At modest pressure ratios around 3.3, the maximum improvement of 1.09 percentage points is achieved using 30°C inlet water temperature. The cooling is found to significantly reduce the air temperature near diffuser passage solid walls, thus lead to more uniform air temperatures at compressor exit. The reduction of 1.33°C and 2.21°C in the diffuser outlet temperature have been found at 1.68 kg/s air mass flow with 70°C and 30°C water inlet temperature respectively. Moreover, the thermal stress in diffuser vanes is shown to be lower with the cooling.

Keywords

Compressor diffuser vanes water cooling conjugate heat transfer fluid-structure interaction internal flow field

Get full access to this article

View all access options for this article.

References

Bohn

Heuer

Kusterer

. Conjugate flow and heat transfer investigation of a turbo charger: part I — numerical results, In. Volume 3: Turbo Expo 2003, Atlanta, GA, USA, 1 January 2003. ASMEDC, pp. 715–722.

Bohn

Moritz

Wolff

. Conjugate flow and heat transfer investigation of a turbo charger: part II — experimental results, In. Volume 3: Turbo Expo 2003, Atlanta, GA, USA, 1 January 2003. ASMEDC, pp. 723–729.

Heuer

Engels

Wollscheid

. Thermomechanical analysis of a turbocharger based on conjugate heat transfer, In. Volume 1: Turbo Expo 2005, Reno, NV, USA, 1 January 2005. ASMEDC, pp. 829–836.

Moosania

Zheng

. Comparison of cooling different parts in a high pressure ratio centrifugal compressor. Appl Sci 2016; 07: 16.

Moosania

Zheng

. Effect of internal heat leakage on the performance of a high pressure ratio centrifugal compressor. Appl Therm Eng 2017; 111: 317–324.

Moosania

Zheng

. Performance improvement of a high pressure ratio centrifugal compressor by integrated cooling. Proc Inst Mech Eng G J Aerosp Eng 2017; 230: 2233–2240.

Koch

Hiller

Borsdorf

. Turbocharger with water-cooled aluminum turbine housing. MTZ worldwide 2014; 75(11): 30–33.

San Andrés

Barbarie

Bhattacharya

, et al. On the effect of thermal energy transport to the performance of (semi)floating ring bearing systems for automotive turbochargers, In. Volume 5: Manufacturing Materials and Metallurgy; Marine; Microturbines and Small Turbomachinery; Supercritical CO2 Power Cycles, Copenhagen, Denmark, 11 June 2012. American Society of Mechanical Engineers, pp. 561–570.

Sirakov

Casey

. Evaluation of heat transfer effects on turbocharger performance, In. Proceedings of ASME Turbo Expo 2011, Vancouver, BC, Canada, 6-10 June 2011, GT2011-45887.

10.

Hayashi

Fujita

Arai

, et al. Development of water-cooling compressor for automotive turbocharger, In. Turbocharging Seminar 2018, Shanghai, China, 16-17 October 2018.

11.

Luikov

. Conjugate convective heat transfer problems. Int J Heat Mass Tran; 17(2): 257–265.

12.

Mironova

Kortikov

. Conjugate heat transfer on a non-isothermal rotating disc. Thermophys Aeromechanics; 18(4): 573–578.

13.

Pelletier

Ignat

Ilinca

. An adaptive finite element method for conjugate heat transfer, In. 33rd Aerospace Sciences Meeting and Exhibit, Reno, NV, USA, 9 January 1995. American Institute of Aeronautics and Astronautics.