Thermal performance investigations by the use of nanofluids and phase change materials (PCM) in parabolic trough collectors (PTC) along with exergetic,economic,and application-based analyses
Restricted accessReview articleFirst published online November, 2025
Thermal performance investigations by the use of nanofluids and phase change materials (PCM) in parabolic trough collectors (PTC) along with exergetic,economic,and application-based analyses
This review article addressed the issues related to thermal efficiency increment and thermal performance investigation by usage of nanofluids and Phase Change Materials (PCM) as thermal performance enhancer and Thermal Energy Storage (TES) materials in Parabolic Trough Collectors (PTC). Also, the useful energy, exergy and the economic analysis utilizing PTC have also been explained and reviewed along with their applications. The different methods considered were experimental and some were numerical too. It was observed that, some of the nanofluids of metallic compounds like WS2, Al2O3, SiC, Fe3O4 increased thermal efficiency by 31%, 35.7%, 30 and 40.41%. The usage of PCM like beeswax and paraffin wax as TES materials, led to increase in thermal efficiency by 54.04% and 85%. Exergetic efficiency increments of 5.49% was observed by the usage of Al2O3/SiO2-Syltherm 800 hybrid nanofluid also by using MXene/Syltherm 800 hybrid nanofluid the levelized cost of energy was low and was 0.1324/kW. The applications of PTC as Concentrated Solar Power (CSP) technology for electricity and steam generation, and industrial process heat have also been summarized. This work aids by finding different kinds of optimal nanofluid and optimal PCM along with their types (organic, inorganic, and hybrid) and kind of work (experimental or numerical) in which they are used and heat transfer efficiency increase Mechanisms. The novelty of such compact review article is that in single review articles the recent progress and technical advancements of past decades work on PTC is getting fulfilled holistically, earlier reviews were based on a single or combination of such isolated topics. Finally, the emerging and current applications in the field of hybrid systems are also elucidated. The techniques like Artificial Intelligence, Machine Learning, and Deep Learning applied on PTC for thermal performance prediction and fault detection are also discussed.
MahianOKianifarAHerisSZ, et al.Nanofluids effects on the evaporation rate in a solar still equipped with a heat exchanger. Nano Energy2017; 36: 134–155.
2.
Rostami DibavarMMohammadpourfardMMohseniF, et al.Numerical study on the effect of non-uniform magnetic fields on melting and solidification characteristics of NEPCMs in an annulus enclosure. Energy Convers Manag2018; 171: 879–889.
3.
KianifarAZeinali HerisSMahianO. Exergy and economic analysis of a pyramid-shaped solar water purification system: active and passive cases. Energy2012; 38: 31–36.
4.
KargaranMGoshayeshiHRPourpashaH, et al.An extensive review on the latest developments of using oscillating heat pipe on cooling of photovoltaic thermal system. Therm Sci Eng Prog2022; 36: 101489.
5.
SardarabadiMPassandideh-FardMZeinali HerisS. Experimental investigation of the effects of silica/water nanofluid on PV/T (photovoltaic thermal units). Energy2014; 66: 264–272.
6.
Adibi ToosiSSGoshayeshiHRZeinali HerisS. Experimental investigation of stepped solar still with phase change material and external condenser. J Energy Storage2021; 40: 102681.
7.
Najafi AnamaqRKhaniLMohammadpourfardM, et al.Comprehensive thermoeconomic study of a new solar thermosyphon-assisted multigeneration system. Sol Energy2023; 258: 304–318.
8.
ChajiHAjabshirchiYEsmaeilzadehE, et al.Experimental study on thermal efficiency of flat plate solar collector using TiO2/water nanofluid. Mod Appl Sci2013; 7: 60–69.
9.
MahianOKianifarAZeinali HerisS, et al.First and second laws analysis of a minichannel-based solar collector using boehmite alumina nanofluids: effects of nanoparticle shape and tube materials. Int J Heat Mass Tran2014; 78: 1166–1176.
10.
KamravaMFazilatiMAToghraieD. Investigating the use of nano-enhanced phase change material in floor heating system: a numerical approach. Int Commun Heat Mass Tran2025; 164: 108962.
11.
RenJRasheedRHBagheritabarM, et al.Battery thermal management system by employing different phase change materials with SWCNT nanoparticles to obtain better battery cooling performance. Case Stud Therm Eng2024; 61: 104987.
12.
ToosiSSAGoshayeshiHRZahmatkeshI, et al.Effect of rectangular, triangular, and semi-circular hybrid nano phase change material chambers under permanent magnetic field on the stepped solar still efficiency: an experimental study. Case Stud Therm Eng2024; 59: 104451.
13.
WangYJasimDJMohammad SajadiS, et al.Experimental study of phase change material (PCM) based spiral heat sink for the cooling process of electronic equipment. Ain Shams Eng J2024; 15: 102793.
14.
GuanYZhouLHuW, et al.Comparative analysis of the thermal performances of two parabolic trough solar air collectors used for greenhouse heating: an experimental study. Therm Sci Eng Prog2025; 62: 103666.
15.
Ben KhedherNMehryanSAMAhmed AlashaariGA, et al.Enhancing solar desalination efficiency through integrated parabolic trough solar collector, porous media, and phase change material: a case study using Middle East weather data. Appl Therm Eng2025; 274: 126672.
16.
LiKRuJWuD, et al.Exergy destruction and heat transfer of parabolic trough collector using porous medium: machine learning algorithms. Appl Therm Eng2025; 276: 126922.
17.
WangBXuQYangY. Design and implementation of a novel automated sun tracking system for distributed heating using parabolic trough solar collector. Appl Therm Eng2025; 274: 126607.
18.
NaveenkumarRSharmaAVenkateshkumarR, et al.Performance evaluation of modified parabolic trough collector based solar water heater. Results Eng2025; 26: 105110.
19.
HachichaAA. On the use of hybrid nanofluids in direct absorption parabolic trough solar collector. Renew Energy2025; 248: 123056.
20.
OumachtaqAHalimiMOuhadouM, et al.Thermal performance evaluation of a parabolic trough collector receiver: a numerical study of three heat exchanger configurations. Case Stud Therm Eng2025; 72: 106303.
21.
JalilovDJuraevTHalimovA, et al.The impact of volumetric flow rate adjustments on pressure drop and pumping power in parabolic trough collectors. Research2025; 2: 100470.
22.
VermaAKYadavL. Experimental study of desiccant wheel regeneration using a series parabolic trough collector having a concentric copper tube in evacuated tube solar air heater for medium solar intensity. J Build Eng2025; 111: 113154.
23.
CristaudoABevilacquaPMorroneP, et al.A novel two-phase numerical model for evaluating thermal crisis in the absorber tube of a parabolic trough collector for direct steam generation. Int Commun Heat Mass Tran2025; 165: 109049.
24.
ZhangKTianJLiuB, et al.Numerical simulation analysis of dust deposition characteristics and effects on parabolic trough solar collector. J Wind Eng Ind Aerod2025; 261: 106086.
25.
ZhuSPengYWangJ, et al.Impact of swallow-shaped bionic ribs on the thermal–hydraulic performance of parabolic trough solar collector. Appl Therm Eng2025; 274: 126589.
26.
ThejusKSaladiJKSureshR, et al.Thermo-optical performance analysis of fixed and full-tracking parabolic trough collectors in Indian climates. Therm Sci Eng Prog2025; 63: 103735.
27.
KhademiMMKasaeianA. Analysis of a combined cycle utilizing parabolic trough collector integrated organic rankine cycle and single-stage evaporation. Energy Convers Manag X2025; 26: 100932.
28.
ŞahmerdanOCimşitCArıcıM, et al.Thermodynamic analysis of different nanofluids in a parabolic trough solar collector for hydrogen production. Int J Hydrogen Energy2025; 144: 875–886.
29.
KarabugaA. Exergy and economic analysis of evacuated tube heat pipe solar collector and parabolic trough solar collectors based power, cooling and hydrogen production. Int J Hydrogen Energy2025; 146: 150006.
30.
KumarBAwasthiALeeJ, et al.Numerical analysis of absorber tube shapes in PCM-Integrated parabolic trough solar collectors. Case Stud Therm Eng2025; 66: 105783.
31.
FaisalASKhalidMVakaM, et al.Recent progress in solar water heaters and solar collectors: a comprehensive review. Therm Sci Eng Prog2021; 25: 100981.
32.
ZhangJZhuT. Systematic review of solar air collector technologies: performance evaluation, structure design and application analysis. Sustain Energy Technol Assessments2022; 54: 102885.
33.
LiSGongXLinW, et al.Review of transpired solar collectors: heat and mass transfer mechanisms and enhancement, system integration, and performance assessment and optimisation. J Clean Prod2024; 450: 141967.
34.
HerrandoMWangKHuangG, et al.A review of solar hybrid photovoltaic-thermal (PV-T) collectors and systems. Prog Energy Combust Sci2023; 97: 101072.
35.
MuruganMSaravananAElumalaiP, et al.An overview on energy and exergy analysis of solar thermal collectors with passive performance enhancers. Alex Eng J2022; 61: 8123–8147.
36.
AlsagriASAlrobaianAAAlmohaimeedSA. Concentrating solar collectors in absorption and adsorption cooling cycles: an overview. Energy Convers Manag2020; 223: 113420.
37.
Sarvar-ArdehSRashidiSRafeeR, et al.Recent advances in the applications of solar-driven co-generation systems for heat, freshwater and power. Renew Energy2024; 225: 120256.
38.
KrishnaYFaizalMSaidurR, et al.State-of-the-art heat transfer fluids for parabolic trough collector. Int J Heat Mass Tran2020; 152: 119541.
39.
AboelmaarefMMZayedMEZhaoJ, et al.Hybrid solar desalination systems driven by parabolic trough and parabolic dish CSP technologies: technology categorization, thermodynamic performance and economical assessment. Energy Convers Manag2020; 220: 113103.
40.
ChavezPEAFinottiFLargillerG, et al.A review of the use of nanofluids as heat-transfer fluids in parabolic-trough collectors. Appl Therm Eng2022; 211: 118346.
41.
SainiPSinghSKajalP, et al.A review of the techno-economic potential and environmental impact analysis through life cycle assessment of parabolic trough collector towards the contribution of sustainable energy. Heliyon2023; 9: e17626.
42.
KumarAKunwerRDongaRK, et al.Effect of oval rib parameters on heat transfer enhancement of TiO2/water nanofluid flow through parabolic trough collector. Case Stud Therm Eng2024; 55: 104080.
43.
Samimi AkhijahaniHSalamiPIranmaneshM, et al.Experimental study on the solar drying of rhubarb (Rheum ribes L.) with parabolic trough collector assisted with air recycling system, nanofluid and energy storage system. J Energy Storage2023; 60: 106451.
44.
FarooqMFarhanMAhmadG, et al.Thermal performance enhancement of nanofluids based parabolic trough solar collector (NPTSC) for sustainable environment. Alex Eng J2022; 61: 8943–8953.
45.
MashhadianAHeyhatMMMahianO. Improving environmental performance of a direct absorption parabolic trough collector by using hybrid nanofluids. Energy Convers Manag2021; 244: 114450.
46.
Martínez-MerinoPEstelléPAlcántaraR, et al.Thermal performance of nanofluids based on tungsten disulphide nanosheets as heat transfer fluids in parabolic trough solar collectors. Sol Energy Mater Sol Cell2022; 247: 111937.
47.
EsmaeiliZAkbarzadehSRashidiS, et al.Effects of hybrid nanofluids and turbulator on efficiency improvement of parabolic trough solar collectors. Eng Anal Bound Elem2023; 148: 114–125.
48.
Abbasian AraniAAMonfarediF. Nanofluid turbulent flow in parabolic trough collector: insulator roof, Acentric absorber tube and SiC nanoparticles effects. Eng Anal Bound Elem2023; 156: 160–174.
49.
NorouziAMSiavashiMKhaliji OskoueiM. Efficiency enhancement of the parabolic trough solar collector using the rotating absorber tube and nanoparticles. Renew Energy2020; 145: 569–584.
50.
ZaharilHA. An investigation on the usage of different supercritical fluids in parabolic trough solar collector. Renew Energy2021; 168: 676–691.
51.
MohammedHAVuthaluruHBLiuS. Thermohydraulic and thermodynamics performance of hybrid nanofluids based parabolic trough solar collector equipped with wavy promoters. Renew Energy2022; 182: 401–426.
52.
Martínez-MerinoPAlcántaraRGómez-LarránP, et al.MoS2-based nanofluids as heat transfer fluid in parabolic trough collector technology. Renew Energy2022; 188: 721–730.
53.
RamSGanesanHSainiV, et al.Performance assessment of a parabolic trough solar collector using nanofluid and water based on direct absorption. Renew Energy2023; 214: 11–22.
54.
AbedNAfganICioncoliniA, et al.Effect of various multiple strip inserts and nanofluids on the thermal–hydraulic performances of parabolic trough collectors. Appl Therm Eng2022; 201: 117798.
55.
HamadaMAKhalilHAbou Al-SoodMM, et al.An experimental investigation of nanofluid, nanocoating, and energy storage materials on the performance of parabolic trough collector. Appl Therm Eng2023; 219: 119450.
56.
PanjaSKDasBMaheshV. Numerical study of parabolic trough solar collector’s thermo-hydraulic performance using CuO and Al2O3 nanofluids. Appl Therm Eng2024; 248: 123179.
57.
BrahimTJemniA. Comparative study of parabolic trough solar collector using sysltherm-800 and therminol-VP1 non-metallic nanofluids. Therm Sci Eng Prog2023; 43: 101951.
58.
Al-RabeeahAYSeresIFarkasI. Experimental and numerical investigation of parabolic trough solar collector thermal efficiency enhanced by graphene–Fe3O4/water hybrid nanofluid. Results Eng2024; 21: 101887.
59.
MhedhebTHassenWMhimidA, et al.Parametric analysis of a solar parabolic trough collector integrated with hybrid-nano PCM storage tank. Case Stud Therm Eng2023; 51: 103652.
60.
WangYJasimDJMohammad SajadiS, et al.Experimental study of phase change material (PCM) based spiral heat sink for the cooling process of electronic equipment. Ain Shams Eng J2024; 15: 102793.
61.
MalekpourAAhmadiRSadeghzadehS. In situ latent thermal energy storage in underfloor heating system of building connected to the parabolic trough solar collector-an experimental study. J Energy Storage2021; 44: 103489.
62.
TurkiAFMahdyOSAbu-HamdehNH, et al.Investigating the thermal performance of nano-encapsulated phase change materials-water nanofluid in the presence of a heat source as applied in electronic devices. J Taiwan Inst Chem Eng2023; 150: 105030.
63.
AlaidarosAMAlZahraniAA. Thermal performance of parabolic trough integrated with thermal energy storage using carbon dioxide, molten salt, and oil. J Energy Storage2024; 78: 110084.
64.
AminMUmarHGintingSF, et al.Enhancing solar distillation through beeswax-infused tubular solar still with a heat exchanger using parabolic trough collector. J Energy Storage2024; 86: 111262.
65.
SalehEMHameedVM. Innovative new solar parabolic trough collector enhanced by corrugated receiver surface with PCM and turbulator inside. J Energy Storage2024; 86: 111403.
66.
EbrahimiAGhorbaniBSkandarzadehF, et al.Introducing a novel liquid air cryogenic energy storage system using phase change material, solar parabolic trough collectors, and kalina power cycle (process integration, pinch, and exergy analyses). Energy Convers Manag2021; 228: 113653.
67.
BagherzadehKPiroozmandVAhmadiR. Cascading latent heat thermal energy storage in parabolic trough solar collector as a promising solution: an experimental investigation. Energy Convers Manag2024; 300: 117942.
68.
LamraniBKuznikFDraouiA. Thermal performance of a coupled solar parabolic trough collector latent heat storage unit for solar water heating in large buildings. Renew Energy2020; 162: 411–426.
69.
TianLLiangMGuoJ, et al.Heat transfer and thermal stress of a parabolic trough solar collector with secondary reflector using microencapsulated phase change material slurries. Therm Sci Eng Prog2024; 48: 102364.
70.
VahidiniaFKhorasanizadehHAghaeiA. Comparative energy, exergy and CO2 emission evaluations of a LS-2 parabolic trough solar collector using Al2O3/SiO2-Syltherm 800 hybrid nanofluid. Energy Convers Manag2021; 245: 114596.
71.
GhorbaniBMahyariKBMehrpooyaM, et al.Introducing a hybrid renewable energy system for production of power and fresh water using parabolic trough solar collectors and LNG cold energy recovery. Renew Energy2020; 148: 1227–1243.
72.
ZhangYMaSYueW, et al.Energy, exergy, economic and environmental (4E) evaluation of a solar-integrated energy system at medium–high temperature using CO2 as the parabolic trough collector (PTC) working medium. Energy Convers Manag2023; 296: 117683.
73.
Vazini ModabberHKhoshgoftar ManeshMH. 4E dynamic analysis of a water-power cogeneration plant integrated with solar parabolic trough collector and absorption chiller. Therm Sci Eng Prog2021; 21: 100785.
74.
ZhengNZhangHDuanL, et al.Techno-economic analysis of a novel solar-driven PEMEC-SOFC-based multi-generation system coupled parabolic trough photovoltaic thermal collector and thermal energy storage. Appl Energy2023; 331: 120400.
75.
SinghSKTiwariAKPaliwalHK. Thermo-economic assessment of hybrid kalina cycle and organic rankine cycle system using a parabolic trough collector solar field. Therm Sci Eng Prog2023; 46: 102132.
76.
Rodríguez RodrigoRDíaz MartínRBaranda FernándezM, et al.Technical and economic study of solar energy concentration technologies (Linear fresnel and parabolic trough collectors) to generate process heat at medium temperature for the dairy industry of Spain. Sol Energy2024; 271: 112420.
77.
GoelAManikG. Step towards sustainability: Techno-Economic optimization of a parabolic trough solar collector using multi-objective genetic algorithm. Therm Sci Eng Prog2023; 37: 101539.
78.
AseriTKSharmaCKandpalTC. A techno-economic appraisal of parabolic trough collector and central tower receiver based solar thermal power plants in India: effect of nominal capacity and hours of thermal energy storage. J Energy Storage2022; 48: 103976.
79.
AseriTKSharmaCKandpalTC. Estimation of capital costs and techno-economic appraisal of parabolic trough solar collector and solar power tower based CSP plants in India for different condenser cooling options. Renew Energy2021; 178: 344–362.
80.
Fernández-GarcíaAZarzaEValenzuelaL, et al.Parabolic-trough solar collectors and their applications. Renew Sustain Energy Rev2010; 14: 1695–1721.
81.
ImmonenJPowellKM. Dynamic optimization with flexible heat integration of a solar parabolic trough collector plant with thermal energy storage used for industrial process heat. Energy Convers Manag2022; 267: 115921.
82.
ReddyKSAnanthsornarajC. Design, development and performance investigation of solar parabolic trough collector for large-scale solar power plants. Renew Energy2020; 146: 1943–1957.
83.
González-MoraEDurán-GarcíaMD. Assessing parabolic trough collectors and linear fresnel reflectors direct steam generation solar power plants in northwest México. Renew Energy2024; 228: 120375.
84.
SallamSTaqiM. Analysis of direct steam generation in parabolic trough solar collectors under hot climate. Appl Therm Eng2023; 219: 119502.
85.
Rosales-PérezJFVillarruel-JaramilloAPérez-GarcíaM, et al.Techno-economic analysis of hybrid solar thermal systems with flat plate and parabolic trough collectors in industrial applications. Alex Eng J2024; 86: 98–119.
86.
BrennerAKahnJHirschT, et al.Soiling determination for parabolic trough collectors based on operational data analysis and machine learning. Sol Energy2023; 259: 257–276.
87.
AlhamayaniA. Performance analysis and machine learning algorithms of parabolic trough solar collectors using Al2O3-MWCNT as a hybrid nanofluid. Case Stud Therm Eng2024; 57: 104321.
88.
SalariAShakibiHSoltaniS, et al.Optimization assessment and performance analysis of an ingenious hybrid parabolic trough collector: a machine learning approach. Appl Energy2024; 353: 122062.
89.
Ruiz-MorenoSSanchezAJGallegoAJ, et al.A deep learning-based strategy for fault detection and isolation in parabolic-trough collectors. Renew Energy2022; 186: 691–703.
90.
AlawiOAKamarHMHomodRZ, et al.Incorporating artificial intelligence-powered prediction models for exergy efficiency evaluation in parabolic trough collectors. Renew Energy2024; 225: 120348.
