Abstract
The continuous increase of man's life span, and the growing confidence in using artificial materials inside the human body necessities introducing more effective prosthesis and implant materials. However, no artificial implant has biomechanical properties equivalent to the original tissue. Recently, titanium and bioceramic materials, such as hydroxyapatite are extensively used as fabrication materials for dental implant due to their high compatibility with hard tissue and living bone. Titanium has reasonable stiffness and strength while hydroxyapatite has low stiffness, low strength and high ability to reach full integration with living bone. In order to obtain good dental implantation of the biomaterial; full integration of the implant with living bone should be satisfied. Minimum stresses in the implant and the bone must be achieved to increase the life of the implant and prevent bone resorption. Therefore, the aim of the current investigation is to design an implant made from functionally graded material (FGM) to achieve the above advantages. The finite element method and optimization technique are used to reach the required implant design. The optimal materials of the FGM dental implant are found to be hydroxyapatite/titanium. The investigations have shown that the maximum stress in the bone for the hydroxyapatite/titanium FGM implant has been reduced by about 22% and 28% compared to currently used titanium and stainless steel dental implants, respectively.