A finite element representation modelling transient heat conduction of gas tungsten arc welding of stainless steel is used to evaluate different methods for model order reduction. The focus is on establishing a linear low-order model of the dynamic relation between the welding current and the temperature measured by a radiation pyrometer. The objective of this low-order model is to design a model-based feedback controller and to investigate the consequences of applying feedback control of the process. Three different approaches for model reduction have been evaluated, namely the Krylov subspace method for moment matching, balanced truncation and parametric system identification. The study provides a knowledge base for the selection of model order reduction methods when dealing with large-scale systems like finite element models of transient heat conduction, and it recommends parametric system identification. It renders sufficient approximations for controller design, no linearization of the finite element model is required, and there is no limit on degrees of freedom of the finite element model.
LjungL. System identification: theory for the user. 2nd ed.Upper Saddle River, NJ: Prentice-Hall, 1999.
5.
BechtoldTRudnyiEBKorvinkJG. Automatic generation of compact electro-thermal models for semiconductor devices. IEICE Trans Electron Dev2003; 86: 459–465.
6.
GuyanRJ. Reduction of stiffness and mass matrices. AIAA J1965; 3: 380.
7.
ZhouSQZhaoCS. Modal truncation to vibration analysis of stator in ultrasonic motor. Guangxue Jingmi Gongcheng/Opt Precis Eng2009; 17: 3009–3015.
8.
BurkardtJGunzburgerMLeeH-C. POD and CVT-based reduced-order modeling of Navier–Stokes flows. Comput Meth Appl Mech Eng2006; 196: 337–355.
9.
AquinoW. An object-oriented framework for reduced-order models using proper orthogonal decomposition (POD). Comput Meth Appl Mech Eng2007; 196: 4375–4390.
10.
BechtoldTRudnyiEBKorvinkJG. Dynamic electro-thermal simulation of microsystems – a review. J Micromech Microeng2005; 15: r17–r31.
11.
BechtoldTRudnyiEBKorvinkJG. Connecting heat transfer macromodels for array MEMS structures. J Micromech Microeng2005; 15: 1205–1214.
12.
BinionDChenX. Coupled electrothermal-mechanical analysis for MEMS via model order reduction. Fin Elem Anal Des2010; 46: 1068–1076.
13.
SchwartzJDRiveraDE. A system identification approach to PDE modeling of a semiconductor manufacturing process. In: WalterE (ed) 15th IFAC symposium on system identification. pp.964–969, 2009.
14.
AtwellJAKingBB. Reduced order controllers for spatially distributed systems via proper orthogonal decomposition. SIAM Journal of Scientific Comput2005; 26: 128–151.
15.
PearsonK. On lines and planes of closest fit to systems of points in space. Phil Mag1901; 2: 559–572.
16.
GugercinSAntoulasAC. A survey of model reduction by balanced truncation and some new results. Int J Contr2004; 77: 748–766.
17.
FeldmannPFreundRW. Efficient linear circuit analysis by Padé approximation via the Lanczos process. IEEE Trans Comput-Aid Des Integr Circ Syst1995; 14: 639–649.
18.
GallivanKGrimmeEDoorenPV. Asymptotic waveform evaluation via a restarted Lanczos method. Appl Math Lett1994; 7: 75–80.
ObinataGAndersonBDO. Model reduction for control system design. London: Springer, 2001.
21.
SikströmF. Modeling and simulation for welding automation. PhD Thesis, Chalmers University of Technology, 2010.
22.
MillsKC. Recommended values of thermo physical properties for selected commercial alloys. Cambridge: Woodhead Publishing, 2002.
23.
GoldakJAAkhlaghiM. Computational welding mechanics. New York: Springer, 2005.
24.
ZienkiewiczOCTaylorRLZhuJZ. The finite element method: its basis and fundamentals. 6th ed.Oxford: Elsevier/Butterworth-Heinemann, 2005.
25.
KumarADebRoyT. Heat transfer and fluid flow during gas-metal-arc fillet welding for various joint configurations and welding positions. Metall Mater Trans A: Phys Metall Mater Sci2007; 38: 506–519.
26.
BagSDeA. Development of a three-dimensional heat-transfer model for the gas tungsten arc welding process using the finite element method coupled with a genetic algorithm-based identification of uncertain input parameters. Metall Mater Trans A2008; 39: 2698–2710.
27.
MughalMFawadHMuftiR. Three-dimensional finite-element modelling of deformation in weld-based rapid prototyping. Proc IMechE, Part C: J Mech Eng Sci2006; 220: 875–885.
28.
NguyenNT. Thermal analysis of welds. Southampton: WIT Press, 2004.
29.
OkuiNKetronDBordelonF. A methodology for prediction of fusion zone shape. Weld J2007; 86: 35s–43s.
30.
CorwinRRRodenburghAII. Temperature error in radiation thermometry caused by emissivity and reflectance measurement error. Appl Opt1994; 33: 1950–1957.
31.
RughWJ. Linear system theory. 2nd ed.Englewood Cliffs, NJ: Prentice-Hall, 1996.
32.
ArnoldiWE. The principle of minimized iterations in the solution of the matrix eigenvalue problem. Q J Appl Math1951; 9: 17–29.
33.
GrimmeE. Krylov projection methods for model reduction. PhD Thesis, University of Illinois at Urbana-Champaigne, 1997.
34.
LanczosC. An iteration method for the solution of the eigenvalue problem of linear differential and integral operators. J Res Natl Bur Stand1950; 45: 255–282.
35.
OlssonH. Model order reduction with rational Krylov methods. PhD Thesis, Division of Numerical Analysis and Computer Science, KTH, Stockholm, Sweden, 2005.
36.
ParlettBN. The symmetric eigenvalue problem. Philadelphia, PA: SIAM, 1998.
37.
MooreB. Principal component analysis in linear systems: Controllability, observability, and model reduction. IEEE Trans Autom Contr1981; 26: 17–32.
38.
MullisCRobertsR. Synthesis of minimum roundoff noise fixed point digital filters. IEEE Trans Circ Syst1976; 23: 551–562.
39.
VargaA. Balancing free square-root algorithm for computing singular perturbation approximations. In: Proceedings of the 30th IEEE conference on decision and control 2. 1991, pp.1062–1065.
40.
SöderströmTStoicaP. 1989. System identification. Englewood Cliffs, NJ: Prentice-Hall.
41.
AntoulasACSorensenDCGugercinS. A survey of model reduction methods for large-scale systems. Contemp Math2001; 280: 193–219.
