A new turbine model validation technique that is based on adaptation of look-up tables is described in this article. Simulation results from the VIDYN turbine simulation program and measurements from Big Glenn wind turbine, located outside Gothenburg, Sweden, are used as an input to this new model validation technique. The models of the flapwise bending moment and power coefficient are validated for Big Glenn turbine. Measurement data are acquired during normal turbine operation. Verification results show good agreement between model outputs and measured data. The method allows prediction in a wide range of turbine operating variables, using only few measured points.
JonkmanJBuhlM. FAST user’s guide. NREL/EL-500-29798, 2005. Golden, CO: National Renewable Energy Laboratory.
3.
GananderHOlssonB. VIDYN simuleringsprogram för horisontalaxlade vindkraftverk. Technical report TG-R-98-14, 1998. Täby: TG Teknikgruppen AB.
4.
UnlandSHeinsteinAGundlachM. Method for adjusting adaptive programme maps of an adaptive knock control in an internal combustion engine and a method for adjusting the knock control in said engine. US Patent 6,745,749 B2, 2004.
5.
WuG. A table update method for adaptive knock control. SAE paper 2006-01-0607, 2006.
6.
ZhouSShenXChenF. Flow control of air compressor in fuel cell system based on adaptive look-up table algorithm. In: 2010 international conference on electrical and control engineering, Wuhan, China, 25–27 June 2010, pp.3761–3766. New York: IEEE.
7.
StotskyA. Adaptive estimation of the engine friction torque. Eur J Control2007; 13(6): 618–624.
8.
StotskyA. Data-driven algorithms for engine friction estimation. Proc IMechE, Part D: J Automobile Engineering2007; 221: 901–909.
