Abstract
Hydraulic switching control is an opportunity for economic, robust and energy efficient hydraulic motion control. The hydraulic buck converter represents a promising concept, which meets these requirements. Part I of this publication has shown that for a convenient control performance a model-based control should be applied. In this paper a flatness-based controller for linear hydraulic motion control with a sub-kilowatt hydraulic buck converter is presented. A simple model-based on an averaging of the switching converter is employed to derive a flatness-based controller combined with a nonlinear observer to estimate all system states only from a position signal. Its performance is studied by simulations and experiments for large ramp type and sinusoidal motions of a heavy mass. Comparison of motion quality and energy consumption are made between the converter and a standard hydraulic proportional drive using a servo-valve instead of the switching converter. With this flatness-based controller a tracking performance as good as of a proportional drive can be achieved, yet at much better efficiency. Proportional control for the switching converter, however, leads to inferior results for this type of intended motions.
Get full access to this article
View all access options for this article.