Identification of the operating parameters of a complex technical system important from the operational potential point of view

Abstract

The most important processes which take place in a technical system are the operation and service processes. Knowing the actual technical state of the system, it is possible to make a decision whether the system can operate or should be serviced. The efficiency of the system operation and the possibility of the failure occurrence strongly depend on the relevancy of this decision. The technical state of the system is described by the system features affected by the time histories of its operational parameters. Unfortunately, the amount of the operational parameters can be significant. Therefore, it becomes purposeful to identify the operational parameters significant from the system technical state evaluation point of view. In the article, the universal method of the significant operational parameters identification and the research carried out in a real industrial system to verify its correctness and the accuracy are presented.

Keywords

Identification operational potential process parameter operating operating process operational parameter object technical object complex technical object maintenance system technical system state system state technical state service feature cardinal feature fuzzy curves chart function space

Get full access to this article

View all access options for this article.

References

Oziemski

. Man in the machine. Radom: ITeE, 2004.

Dąbrowski

. Diagnosing of the anthropotechnics systems in potential – effects terms. Warsaw: Military Technical Academy, 2001.

Jaźwiński

Żurek

. Selected problems of the supplies control. Warsaw; Radom: ITeE, 2007.

Pająk

. The space of a feature of a complex technical system. Sci Probl Mach Oper Mainten 2010; 2: 31–41.

Pająk

. Operational potential of a complex technical system. Mainten Probl 2015; 4: 99–113.

Sheldon

. Linear algebra done right. New York: Springer International Publishing, 2015.

Dorst

Fontijne

Mann

. Geometric algebra for computer science. San Francisco, CA: Elsevier, 2007.

Dattorro

. Convex optimization & Euclidean distance geometry. Palo Alto, CA: Meboo Publishing, 2008.

Pająk

Woropay

. Estimation of operational potential consumption on base of exploitation parameters values. J KONES Powertr Transp 2006; 13(3): 259–262.

10.

Pająk

Woropay

. Maintenance strategy by controlled consumption of operational potential. J KONES Powertr Transp 2009; 16(4): 367–374.

11.

Zerroukia

Aifa

Baddari

. Prediction of natural fracture porosity from well log data by means of fuzzy ranking and an artificial neural network in Hassi Messaoud oil field, Algeria. J Petrol Sci Eng 2014; 115: 78–89.

12.

Wei

Qiu

Karimi

. Reliable output feedback control of discrete-time fuzzy affine systems with actuator faults. IEEE T Circuits: I 2017; 64(1): 170–181.

13.

Wei

Qiu

Reza Karimi

. Fuzzy-affine-model-based memory filter design of nonlinear systems with time-varying delay. IEEE T Fuzzy Syst. Epub ahead of print 27 March 2017. DOI: 10.1109/TFUZZ.2017.2686352

14.

Wei

Qiu

Karimi

et al . New results on H_∞ dynamic output feedback control for Markovian jump systems with time-varying delay and defective mode information. Optim Contr Appl Met 2014; 35: 656–675.

15.

Wei

Qiu

. Mode-dependent nonrational output feedback control for continuous-time semi-Markovian jump systems with time-varying delay. Nonlinear Anal: Hybri 2015; 16: 52–71.

16.

Yamamoto

. From vector spaces to function spaces. Philadelphia, PA: Society for Industrial and Applied Mathematics, 2012.

17.

Zieliński

. Digital signal processing: from theory to application. Warsaw: WKŁ, 2009.

18.

Izydorczyk

Pionka

Tyma

. Signal theory: introduction (Second edition corrected and supplemented). 2nd ed.Gliwice: Helion, 2006.

19.

Szabatin

. Basics of signal theory. Warsaw: WKŁ, 2007.

20.

Muscat

. Functional analysis: an introduction to metric spaces, Hilbert spaces, and Banach algebras. Cham: Springer International Publishing, 2014.

21.

Stefański

. Control theory. Volume II: nonlinear discrete systems, stochastic processes, static and dynamic optimization. Kielce: Kielce University of Technology, 2001.

22.

http://www.rafako.com.pl/products/boilers/668/pulverised-fuel-fired-boilers-with-steam-drum#type_548 (accessed 27 October 2016).

23.

Catalogue of power plants and CHP plants. Warsaw: Polish Agency of Energy Market, 2015.

24.

Pająk

Kalotka

. Fuzzy modelling as a way of estimating the exploitation parameters. Mainten Probl 2006; 2: 215–229.

25.

Swacha

. Advances in software development. Warsaw: Polish Information Processing Society, 2013.

26.

Pająk

. Fuzzy extension of the power units operation quality assessment according to the TKE method. Sci Probl Mach Oper Mainten 2007; 4: 141–151.

27.

Muślewski

Pająk

Landowski

et al . A method for determining the usability potential of ship steam boilers. Pol Marit Res 2016; 92: 105–112.

28.

Documentation of computerised system of power plant supervising ERO_TKE. Radom: TEKOM, Ltd, 2013.

29.

Xing

DeLaquil

et al . Biomass energy in China and its potential. Energ Sustain Dev 2001; 5(4): 66–80.

30.

Cordon

Herrera

. Hybridizing genetic algorithms with sharing scheme and evolution strategies for designing approximate fuzzy rule-based systems. Fuzzy Set Syst 2001; 118(2): 235–255.

31.

Cordon

Herrera

Hoffmann

et al . Genetic fuzzy systems: evolutionary tuning and learning of fuzzy knowledge bases (Advances in fuzzy systems – applications and theory). Singapore: World Scientific Publishing, 2001.

32.

Herrera

Lozano

Verdegay

. Applying genetic algorithms in fuzzy optimization problems. Fuzzy Syst Artif Intel Rep Lett 1994; 3: 39–52.

33.

Cordon

del Jesus

Herrera

. Evolutionary approaches to the learning of fuzzy rule-based classification systems, https://pdfs.semanticscholar.org/6bb3/a48b4a4fb284fb069149c68aeebd20d8b25f.pdf (accessed 1 April 2017).

34.

Alcala

Casillas

Cordon

et al . Techniques for learning and tuning fuzzy rule-based system for linguistic modeling and their application, http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.113.3817&rep=rep1&type=pdf (accessed 1 November 2017).

35.

Piegat

. Fuzzy modeling and control. Heidelberg: Physica-Verlag, 2001.

36.

Pająk

. Fuzzy modelling of temperature difference in 200 MW power unit condenser using genetic fuzzy systems. Control Cybern 2008; 37: 565–583.

37.

Pająk

. Software application for fuzzy analysis of Mamdani model input parameters. In: Proceedings of the 11th international conference on computer systems aided science, industry and transport transcomp, Zakopane, 3–6 December 2007, vol. II, pp.151–157.