Design and prototype of a magnetic adhesion tracked-wheel robotic platform for mooring chain inspection

Abstract

The development of climbing robots for mooring chain applications is still in its infancy due to the operational complexity and the geometrical features of the chain. Mooring chains are subjected to high tidal waves, harsh environmental conditions and storms on a daily basis. Therefore, the integrity assessment of chain links is vital and regular inspection is mandatory for offshore structures. The magnetic adhesion tracked-wheel crawler robot presented in this study is suitable for mooring chain climbing in air and the technique can be adapted for underwater use. The robotic platform can climb mooring chains at a maximum speed of 42 cm/min with an external load of 50 N. A numerical study was conducted to investigate the adhesion module and analysis of the robot structural design. Numerical results were validated using a prototyped robot in laboratory conditions. The proposed robot can be used as a platform to convey equipment for non-destructive testing applications.

Keywords

Mooring chain chain climbing robot crawler robot magnetic adhesion robot tracked-wheel crawler inspection platform numerical modelling robot design

Get full access to this article

View all access options for this article.

References

Gordon

Brown

Allen

et al . Mooring integrity management: a state-of-the-art review. In: Proceedings of the offshore technology conference, Houston, TX, 5–8 May 2014.

Elman

Bramande

Elletson

et al . Reducing uncertainty through the use of mooring line monitoring. In: Proceedings of the offshore technology conference, Rio De Janeiro, Brazil, 29–31 October 2013.

K-T

Shu

Philip

et al . A historical review on integrity issues of permanent mooring systems. In: Proceedings of the offshore technology conference, Houston, TX, 6–9 May 2013.

Angulo

Edwards ÁG

Soua

Gan

T-H

. Mooring integrity management: novel approaches towards in situ monitoring. In: Proceedings of the structural health monitoring – measurement methods and practical applications, IntechOpen, London, 21 June 2017, pp.87–108. https://www.intechopen.com/books/structural-health-monitoring-measurement-methods-and-practical-applications/mooring-integrity-management-novel-approaches-towards-in-situ-monitoring

Noble Denton Europe Limited. Floating production system: JIP FPS mooring integrity. Aberdeen: Health and Safety Executive, 2016.

Rudlin

. Multi-channel ultrasonic inspection of a mooring chain for fatigue cracks. In: Proceedings of the European conference on non-destructive testing, Prague, 2014. 11th European Conference on Non-Destructive Testing (ECNDT 2014), October 6–10, Prague, Czech Republic.

Lowe

Sanderson

Boulgouris

et al . Inspection of cylindrical structures using the first longitudinal guided wave mode in isolation for higher flaw sensitivity. IEEE Sens J 2016; 16(3): 706–714.

Ruiz

Sattar

Sanz

et al . Inspection of floating platform mooring chain with a climbing robot. In: Proceedings of the 17th international conference on climbing and walking robots and the support technologies for mobile machines, Poznan, Poland, 21–23 July 2014

Edwards

Kokkorikos

Garcia

et al . Development of an advanced medium range ultrasonic technique for mooring chains inspection in water, http://www.moorinspect.eu/publications/NDT2012MoorInspect_latest.pdf (2013, accessed 21 December 2015).

10.

Weiss

Andritsos

Schom

et al . Innovative robotic solutions for the survey and certification of ships and mobile offshore units. In: 3rd International Conference on Computer and IT Applications in the Maritime Industries, Siguenza, 9–12 May 2004

11.

García

Suárez

et al . Automated off-shore studless chain inspection system. In: Proceedings of the 16th WCNDT – world conference on NDT, Montreal, QC, Canada, 30 August–3 September 2004.

12.

Williams

. Autonomous robotic system for the inspection of mooring chains that tether offshore oil and gas structures to the ocean floor, http://cordis.europa.eu/docs/publications/1216/121625181-6_en.pdf (2008, acces-sed 10 December 2015).

13.

Autonomous robotic system for the inspection of mooring chains. Project consortium report.

14.

Welapetage, http://www.welaptega.com/services/subseameasurement/ (accessed 25 June 2016).

15.

Howlader

MOF

. Development of a wall climbing robot and ground penetrating radar system for non-destructive testing of vertical safety critical concrete structures. PhD Thesis, London South Bank University, London, 2016.

16.

Howlader

MOF

Sattar

. Finite element analysis based optimization of magnetic adhesion module for concrete wall climbing robot. Int J Adv Comput Sci Appl 2015; 6(8): 8–18.

17.

Shen

. Permanent magnetic system design for the wall-climbing robot. In: Proceedings of the IEEE international conference on mechatronics and automation, Niagara Falls, ON, Canada, 29 July–1 August 2005. New York: IEEE.

18.

Howlader

MOF

Sattar

P. Development of magnetic adhesion based climbing robot for non-destructive testing. In: Proceedings of the computer science and electronic engineering conference, Colchester, 24–25 September 2015. New York: IEEE.