Aiming at the maximum power point tracking for wind turbine, a sensorless intelligent second-order integral sliding mode control based on wind speed estimation is proposed in this article. The maximum wind energy capture is realized by controlling permanent magnet synchronous motor to adjust the speed of wind turbine. First, an intelligent second-order integral sliding mode control is designed for the speed loop and current loop control, which has fast convergence speed, strong robustness and can effectively reduce chattering. Second, a novel cascade observer based on direct sliding mode observer and extended high-gain observer is used to estimate the rotor speed and position. Besides, combined radial basis function neural network is used to estimate the valid value of wind speed. Both simulation and experiment are implemented, which verify the effectiveness of the proposed strategy under the condition of considering both model uncertainty and external disturbance.
SudharshanGSXavierAERaghunathanVR. Fatigue load mitigation in wind turbine using a novel anticipatory predictive control strategy. Proc IMechE, Part I: J Systems and Control Engineering2019; 234(1): 60–80.
2.
AziziANourisolaHShoja-MajidabadS. Fault tolerant control of wind turbines with an adaptive output feedback sliding mode controller. Renew Energ2019; 135: 55–65.
3.
SongDYangJDongM, et al. Kalman filter-based wind speed estimation for wind turbine control. Int J Control Autom Syst2017; 15(3): 1089–1096.
4.
KnudsenTBakTSoltaniM. Prediction models for wind speed at turbine locations in a wind farm. Wind Energ2011; 14(7): 877–894.
5.
GauterinESchulteHGeorgS. Disturbance compensation by wind speed reconstruction based on a Takagi-Sugeno wind turbine model. J Phys Conf2014; 524: 012072.
6.
WuSZhangJ. A terminal sliding mode observer based robust backstepping sensorless speed control for interior permanent magnet synchronous motor. Int J Control Autom Syst2018; 16(6): 2743–2753.
7.
WangYGengLHaoW, et al. Control method for optimal dynamic performance of DTC-based PMSM drives. IEEE Trans Energ Convers2018; 33(3): 1285–1296.
8.
RizviSAAMemonAY. An extended observer-based robust nonlinear speed sensorless controller for a PMSM. Int J Control2018; 92(9): 2123–2135.
9.
ApteAThakarUJoshiV. Disturbance observer based speed control of PMSM using fractional order PI controller. IEEE/CAA J Autom Sinica2019; 6(1): 316–326.
10.
ZhaoYDongL. Robust current and speed control of a permanent magnet synchronous motor using SMC and ADRC. Control Theory Tech2019; 17(2): 190–199.
11.
XiaPDengYWangZ, et al. Speed adaptive sliding mode control with an extended state observer for permanent magnet synchronous motor. Math Probl Eng2018; 2018: 1–13.
12.
YanJWangHHuangS, et al. Load disturbance observer-based complementary sliding mode control for PMSM of the mine traction electric locomotive. Int J Fuzzy Syst2019; 21(4): 1051–1058.
13.
HamidaMAde LeonJGlumineauA. Experimental sensorless control for IPMSM by using integral backstepping strategy and adaptive high gain observer. Control Eng Pract2017; 59: 64–76.
14.
KhlaiefABoussakMChâariA. A MRAS-based stator resistance and speed estimation for sensorless vector controlled IPMSM drive. Electr Power Syst Res2014; 108: 1–15.
15.
ShiTWangZXiaC. Speed measurement error suppression for PMSM control system using self-adaption Kalman observer. IEEE Trans Ind Electron2015; 62(5): 2753–2763.
16.
YeS. Fuzzy sliding mode observer with dual SOGI-FLL in sensorless control of PMSM drives. ISA Trans2018; 85: 161–176.
17.
ZhaoYQiaoWWuL. An adaptive quasi-sliding-mode rotor position observer-based sensorless control for interior permanent magnet synchronous machines. IEEE T Power Electro2013; 28(12): 5618–5629.
18.
HongZPingWBangH, et al. Rotor position measuring method for magnetic levitation high speed PMSM based on fuzzy sliding mode observer. Trans China Electrotech Soc2014; 29: 147–153.
19.
ChenYLiMGaoYW, et al. A sliding mode speed and position observer for a surface-mounted PMSM. ISA Trans2018; 87: 17–27.
20.
CapisaniLMFerraraA. Trajectory planning and second-order sliding mode motion/interaction control for robot manipulators in unknown environments. IEEE Trans Ind Electron2012; 59(8): 3189–3198.
21.
QiangZHuangJLuF, et al. Robust sensor fault reconstruction via a bank of second-order sliding mode observers for aircraft engines. Energies2019; 12(14): 2831.
22.
LingRMaksimovicDLeyvaR. Second-order sliding-mode controlled synchronous buck DC–DC converter. IEEE Trans Power Electron2016; 31(3): 2539–2549.
23.
HuaGGengY. Output power control for variable-speed variable-pitch wind generation systems. IEEE Trans Energ Convers2010; 25(2): 494–503.
24.
ZaragozaJPouJAriasA, et al. Study and experimental verification of control tuning strategies in a variable speed wind energy conversion system. Renew Energ2011; 36(5): 1421–1430.
25.
HylandDCCollinsEGHaddadWM, et al. Neural network system identification for improved noise rejection. Int J Control1997; 68(2): 233–258.
26.
SchillingRJCarrollJJAl-AjlouniAF. Approximation of nonlinear systems with radial basis function neural networks. IEEE Trans Neural Netw2001; 12(1): 1–15.
27.
BottassoCLRiboldiCED. Validation of a wind misalignment observer using field test data. Renew Energ2015; 74: 298–306.
28.
QiuJSunKRudasIJ, et al. Command filter-based adaptive NN control for MIMO nonlinear systems with full-state constraints and actuator hysteresis. IEEE Trans Cybernet2020; 50(7): 2905–2915.
29.
QiuJSunKWangT, et al. Observer-based fuzzy adaptive event-triggered control for pure-feedback nonlinear systems with prescribed performance. IEEE Trans Fuzzy Syst2019; 27(11): 2152–2162.
