The non-isothermal crystallization behaviour of pure LLDPE and LLDPE/REDMUD blends was investigated by differential scanning calorimetry (DSC), and the crystallization kinetics was analyzed by three methods, namely the Jeziorny, the Mo and the Ozawa. The results show that an optimal content of REDMUD (lower than10 wt.%) can enhance the kinetic crystallizability of the system because of heterogeneous nucleation, but excessive REDMUD, by physical hindrance, would impair the kinetic crystallizability. In non-isothermal crystallization kinetics, the Ozawa model did not fit well with the crystallization behaviour of these systems, while the Jeziorny and Mo models were found to be applicable. Furthermore, the activation energy ΔE calculated by the Kissinger method for the transport of macromolecular segments to the growing surface of crystal nucleus indicates that REDMUD could significantly reduce the crystallization migration activation energy of these blends.
ZhaoC., ZhangP., YiL., XuF., WangX., and YongJ.Study on the non-isothermal crystallization kinetics of novel polyamide 6/silica nanocomposites containing epoxy resins. Polym. Test., 27, (2008), 412–419.
2.
QiuS.C., ZhengY.Y., ZengA.R., and GuoY.Prediction of non-isothermal crystallization parameters for isotactic polypropylene. Therm. Acta., 512, (2011), 28–33.
3.
LuoZ.H., SuP.L., ShiD.P., and ZhengZ.W.Steady-state and dynamic modeling of commercial bulk polypropylene process of Hypol technology. Chem. Eng. J., 149, (2009), 370–373.
4.
ZhengY., ShenZ., CaiC., MaS., and XingY.The reuse of nonmetals recycled from waste printed circuit boards as reinforcing fillers in the polypropylene composites. J Hazard. Mater., 163, (2009), 600–603.
5.
PetrS., DagmarS., PetrS., ToshiakiO., and TakashiI.Crystallization kinetics of polypropylene/ethylene octane copolymer blends. Polym. Test., 28, (2009), 215–218.
6.
ThanomkiatPakin, Aht-ongDuangdao, and SupapholPitt. Non-isothermal melt-crystallization and subsequent melting behavior of pigmented medium-density polyethylene. Polym. Test., 24, (2005), 873–885.
PérezR., RojoE., FernándezM., and LealV.Basic and applied rheology of m-LLDPE/LDPE blends: Miscibility and processing features. Polymer, 46, (2005), 8045–8053.
9.
LiuX.Q., LiC.C., and XiaoY.N.Non-isothermal Crystallization Kinetics and Melting Behaviors of Poly(butylene succinate) and Its Copolyester Modified with Trimellitic Imide Units. J Appl. Polym. Sci., 102, (2006), 2493–2495.
10.
ZhangJ., ChenS.G., and JinJ.Non-isothermal melt crystallization kinetics for ethylene–acrylic acid copolymer in diluents via thermally induced phase separation. J Therm. Anal. Calorim., 101, (2010), 243–246.
11.
ParkJ.W., CohS., and LeeH.P.A kinetic analysis of thermal degradation of polymers using a dynamic method. Polym. Degrad. Stabil., 67, (2000), 535–540.
12.
GuptaV.K., SharmaS.Removal of cadmium and zinc from aqueous solutions using red mud. Environ. Sci. Technol., 36, (2002), 3612–3617.
13.
AyresR.U., JohnH., and BjornA.Utilisation of the wastes in the new millennium. MRS Bull., 7, (2001), 477–480.
14.
WangX., QuY.Y., HuW.W., ChenJ., ZhaoX.Y., and WuM.Particle characteristics and rheological constitutive relations of high concentration red mud. J. Ch. Univ. Mini. Technol., 18, (2008), 266–270.
15.
WangS., BoyjooY., ChoueibA., and ZhuZ.H.Removal of dyes from aqueous solution using fly ash and red mud. Water Res., 39, (2005), 129–138.
16.
SantonaL., CastaldiP., and MelisP.Evaluation of the interaction mechanisms between red muds and heavy metals. J Hazard. Mater., 136, (2006), 324–329.
17.
WangS., AngH.M., and TadeM.O.Novel applications of red mud as coagulant, adsorbent and catalyst for environmentally benign processes. Chemosphere., 72, (2008), 1621–1635.
18.
TsakiridisP.E., Agatzini-LeonardouS., and OustadakisP.Red mud addition in the rawmeal for the production of Portland cement clinker. J. Hazard. Mater., 116, (2004), 103–110.
19.
MymrinVśevolod, Pontede Aráujo, HaroldoLopes, FerreiraOmar, Vaamonde, VazquezAlfonso. Environment–friendly method of high alkaline bauxite's red mud and ferrous slag utilization as an example of green chemistry. Green Chem., 5, (2003), 357–360.
20.
JeziornyA.Parameters characterizing the kinetics of the non-isothermal crystallization of poly (ethylene terephthalate) determined by DSC. Polymer, 19, (1978), 1142–1148.
21.
MoZ.S.A method for the non -isothermal crystallization kinetics of polymers.7, (2008), 656–661.
22.
ShiJ.S., YangX.J., WangX., and LuL.D.Non-isothermal crystallization kinetics of nylon 6/attapulgite nanocomposites. Polym. Test., 29, (2010), 596–602.
23.
XuW.B., GeM.L., and HeP.S.Nonisothermal crystallization kinetics of polypropylene/montmorillonite nanocomposites. J Polym. Sci. Pol. Phys., 40, (2002), 408–414.
24.
KimJ., ParK H., and KimS.Unique nucleation of multi-walled carbon nanotube and poly(ethylene 2,6-naphthalate) nanocomposites during non-isothermal crystallization. Polymer, 47, (2006), 1379–1389.
25.
JiangC.Y., WangD.P., ZhangM.J., LiP.J., and ZhaoS.G.Effect of highly filled ferrites on non-isothermal crystallization behavior of polyamide 6 bonded ferrites. Eur. Polym. J., 46, (2010), 2206–2215.
26.
DouQ.Effect of the composition ratio of pimelic acid/calcium stearate bicomponent nucleator and crystallization temperature on the production of beta crystal form in isotactic polypropylene. J. Appl. Polym. Sci., 107, (2008), 958–965.
27.
WangY., LiuW., and ZhangH.The morphology and non-isothermal crystallization characteristics of poly(trimethylene terephthalate)/ BaSO4 nanocomposites prepared by in situ polycondensation. Polym. Test., 28, (2009), 402–405.
28.
JainSachin, GoossensHan, van DuinMartin, and LemstraPiet. Effect of in situ prepared silica nano-particles on non-isothermal crystallization of polypropylene. Polymer, 46, (2005), 8805–8818.
29.
ChenG.X., YoonJ.S.Nonisothermal crystallization kinetics of poly(butylene succinate) composites with a twice functionalized organoclay. J. Polym. Sci. Pol. Phys., 43, (2005), 817–826.
30.
WengW., ChenG.H., and WuD.J.Crystallization kinetics and melting behaviors of nylon 6/exfoliated graphite nanocomposites. Polymer, 44, (2003), 8119–8132.
31.
ZhouH., YingJ., XieX.I., LiuF., and LiD.Nonisothermal crystallization behavior and kinetics of isotactic polypropylene/ethylene– octene blends. Polym. Test., 29, (2010), 915–923.
32.
HauserR., KingJ., PagelR., and KeithJ.Effects of carbon fillers on the thermal conductivity of highly filled liquid-crystal polymer based resins. J. Appl. Polym. Sci., 109, (2008), 2145–2155.
