Epoxy resin is one of the most used resins for obtaining composites and coatings. Its properties have been modified using many materials, mainly based on nanotechnology, such as clays and polyhedral oligomeric silsesquioxanes (POSS). POSS may increase thermal and mechanical resistance and hydrophobicity of the epoxy resin. This study aims at characterizing epoxy nanocomposites, using two distinct resins (DGEBA and DGEBF) and an addition of glycidylisobutyl-POSS in contents of 2.5% and 5% (w/w), through X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and dynamic mechanical analysis (DMA). Samples showed an amorphous halo due to the epoxy resin and a characteristic peak of POSS. TGA results showed a greater residual mass in DGEBF systems due to its wider formation of crosslinks. FTIR spectra demonstrated a higher amplitude of the hydroxyl band in DGEBF 5% system, which may affect its hydrophilic behavior because of the molecular mobility and resin weight reduction. DMA results showed that DGEBA systems are more flexible than DGEBF.
FuJ.-F., ShiL.-Y., YuanS., ZhongO.-D., ZhangD.-S., ChenY., and WuJ.Morphology, toughness mechanism, and thermal properties of hyperbranched epoxy modified diglycidyl ether of bisphenol A (DGEBA) interpenetrating polymer networks. Polymers for Advanced Technologies, 19 (2008), 1597–1607.
2.
FioreV., and ValenzaA.Epoxy resins as a matrix material in advanced fiber-reinforced polymer (FRP) composites. In: JIPING BAI. Advanced fiber-reinforced polymer (FRP) composites for structural applications.Cambridge: Woodhead Publishing, 2013. p. 88–121.
3.
YuanX., YueZ.F., ChenX., WenS.F., LiL., and FengT.EIS study of effective capacitance and water uptake behaviors of silicone-epoxy hybrid coatings on mild steel. Progress in Organic Coatings, 86 (2015) 41–48.
4.
PistorV., OrnaghiF.G., OrnaghiH.L.Jr., and ZatteraA.J.Degradation Kinetic of Epoxy Nanocomposites Containing Different Percentage of Epoxycyclohexyl—POSS. Polymer Composites, 33 (2012), 1224–1232.
5.
PistorV., OrnaghiF.G., OrnaghiH.L., and ZatteraA.J.Dynamic mechanical characterization of epoxy/epoxycyclohexyl–POSS nanocomposites. Materials Science and Engineering A, 532 (2012), 339–345.
6.
PistorV., BarbosaL.G., SoaresB.G., and MaulerR.S.Relaxation phenomena in the glass transition of epoxy/N-phenylaminopropyl – POSS nanocomposites. Polymer, 53 (2012), 5798–5805.
7.
TegartG.Nanotechnology: the technology for the twenty-first century. Foresight, 6 (2004), 364–370.
8.
PaulD.R., and RobesonL.M.Polymer nanotechnology: Nanocomposites. Polymer, 49 (2008), 3187–3204.
9.
CallisterW.D.Ciência E Engenharia Dos Materiais: Uma Introdução. 8th ed. Rio de Janeiro: LTC, (2012). 817 p.
10.
KannanR.Y., SalacinskiH.J., EdirisingheM.J., HamiltonG., and SeifalianA.M.Polyhedral oligomeric silsequioxane-polyurethane nanocomposite microvessels for an artificial capillary bed. Biomaterials, 27 (2006), 4618–4626.
11.
PistorV., SoaresB.G., and MaulerR.S.Influence of different concentrations of N-phenylaminopropyl e POSS on the thermodynamic fragility of the cured epoxy resin. Polymer, 54 (2013), 2292–2298.
12.
PistorV., PuziskiL., and ZatteraA.J.Influence of different concentrations of glycidylisobutyl-POSS on the glass transition of cured epoxy resin. Journal of Applied Polymer Science, 132 (2014), 41453.
13.
ZhangZ., GuA., LiangG., RenP., XieJ., and WangX.Thermo-oxygen degradation mechanisms of POSS/ epoxy nanocomposites. Polymer Degradation and Stability, 92 (2007), 1986–1993.
14.
PelliceS.A., FasceD.P., and WilliamsR.J.Properties of epoxy networks derived from the reaction of diglycidyl ether of bisphenol A with polyhedral oligomeric silsesquioxanes bearing OH-functionalized organic substituents. Journal of Polymer Science Part B: Polymer Physics, 41 (2003), 1451–1461.
15.
ZengK., and ZhengS.Nanostructures and Surface Dewettability of Epoxy Thermosets Containing Hepta(3,3,3-trifluoropropyl) Polyhedral Oligomeric Silsesquioxane-Capped Poly(ethylene Oxide). Journal of Physical Chemistry B, 111 (2007), 13919–13928.
16.
NiY., ZhengS., and NieK.Morphology and thermal properties of inorganic–organic hybrids involving epoxy resin and polyhedral oligomeric silsesquioxanes. Polymer, 45 (2004), 5557–5568.
17.
FuB.X., NamaniM., and LeeA.Influence of phenyl-trisilanol polyhedral silsesquioxane on properties of epoxy network glasses. Polymer, 44 (2003), 7739–7747.
LinP.–H., and KhareR.Molecular Simulation of Crosslinked Epoxy and Epoxy–POSS Nanocomposite. Macromolecules, 42 (2009), 4319–4327.
20.
AbadM.J., BarralL., FasceD.P., and WilliamsR.J.J.Epoxy Networks Containing Large Mass Fractions of a Monofunctional Polyhedral Oligomeric Silsesquioxane (POSS). Macromolecules, 36 (2003), 3128–3135.
21.
LonghiM., PistorV., ZiniL.P., BirrielE.J., KunstS.R., and ZatteraA.J.Influence of the Functionality of Polyhedral Oligomeric Silsesquioxane–POSS Containing Glycidyl Groups on the Dispersion and Interaction With Epoxy Nanocomposites. Polymer Composites, (2016); in press. DOI 10.1002/pc.23991
22.
HalasaA.F., WathenG.D., HsuW.L., MatranaB.A., and MassieJ.M.Relationship between interchain spacing of amorphous polymers and blend miscibility as determined by wide-angle X-ray scattering. Journal of Applied Polymer Science, 43 (1991), 183–190.
23.
WangX., HuY., SongL., XingW., and LuH.Thermal degradation behaviors of epoxy resin/POSS hybrids and phosphorus–silicon synergism of flame retardancy. Journal of Polymer Science Part B: Polymer Physics, 48 (2010), 693–705.
24.
LevchikS.V., and WeilE.D.Thermal decomposition, combustion and flame-retardancy of epoxy resins—a review of the recent literature. Polymer International, 53 (2004), 1901–1929.
25.
PistorV., PuziskiL., and ZatteraA.J.Effect of glycidylisobutyl–POSS on the thermal degradation of the epoxy resin. Journal of Materials Science, 50 (2015), 3697–3705.
26.
LevchikS.V., CaminoG., LudaM.P., CostaL., CostesB., HenryY., MorelE., and MullerG.Mechanistic study of thermal behavior and combustion performance of epoxy resins: I homopolymerized TGDDM. Polymers for Advanced Technologies, 6 (1995), 53–62.
27.
LevchikS.V., CaminoG., LudaM.P., CostaL., CostesB., HenryY., MorelE., and MullerG.Mechanistic study of thermal behaviour and combustion performance of epoxy resins. II. TGDDM/DDS system. Polymer Degradation and Stability, 3 (1995), 359–370.
28.
DaiZ., LiY., YangS., ZhaoN., ZhangX., and XuJ.Kinetics and thermal properties of epoxy resins based on bisphenol fluorene structure. European Polymer Journal, 45 (2009), 1941–1948.
29.
LiuW., QiuQ., WangJ., HuoZ., and SunH.Curing kinetics and properties of epoxy resin–fluorenyl diamine systems. Polymer, 49 (2008), 4399–4405.
30.
FanH., YangR., and LiX.Organic/inorganic hybrid epoxy nanocomposites based on octa(aminophenyl)silsesquioxane. Chinese Journal of Polymer Science, 31 (2013), 148–158.
31.
FloreaN.M., LunguA., BadicaP., CraciunL., EnculescuM., GhitaD.G., IonescuC., ZgirianR.G., and IovuH.Novel nanocomposites based on epoxy resin/epoxy-functionalized polydimethylsiloxane reinforced with POSS. Composites Part B, 75 (2015), 226–234.
32.
YehJ.–M., and ChangK.–C., Polymer/layered silicate nanocomposite anticorrosive coatings. Journal of Industrial and Engineering Chemistry, 14 (2008), 275–291.
33.
LonghiM., KunstS.R., BeltramiL.V.R., KerstnerE.K., Silva FilhoC.I., SarmentoV.H.V., and MalfattiC.Effect of Tetraethoxysilane (TEOS) Amounts on the Corrosion Prevention Properties of Siloxane-PMMA Hybrid Coatings on Galvanized Steel Substrates. Materials Research, 18 (2015), 1140–1155.
34.
SabetS.M., MahfuzH., TerentisA.C., HashemiJ., BoeslB.A facile approach to the synthesis of multi-walled carbon nanotube polyhedral oligomeric silsesquioxane (POSS) nanohybrids. Materials Letters, 168 (2016), 9–12.
35.
LeiX.-F., QiaoM.-T., TianL.-D., YaoP., MaY., ZhangH.P., and ZhangQ.Y.Improved space survivability of polyhedral oligomeric silsesquioxane (POSS) polyimides fabricated via novel POSS-diamine. Corrosion Science, 90 (2015), 223–238.
36.
ZhengW., and MüllerA.H.E.Architecture, self-assembly and properties of well-defined hybrid polymers based on polyhedral oligomeric silsequioxane (POSS). Progress in Polymer Science, 38 (2013), 1121–1162.
37.
FiegenbaumF.Estudo da Compatibilização das Blendas PP/PA6 e PA6/EPR. Dissertation (Master's Degree in Chemical Engineering), Universidade Federal do Rio Grande do Sul, Porto Alegre, (2007).
38.
HuangJ.–M., HuangH.–J., WangY.–X., ChenW.–Y., and ChangF.–C.Preparation and characterization of epoxy/polyhedral oligomeric silsesquioxane hybrid nanocomposites. Journal of Polymer Science Part B: Polymer Physics, 47 (2009), 1927–1934.
39.
SaiterA., SaiterJ.M., and GrenetJ.Cooperative rearranging regions in polymeric materials: Relationship with the fragility of glass-forming liquids. European Polymer Journal, 42 (2006), 213–219.
