The Rapid Prototyping (RP) manufacture technology, computer tomography (CT) image processing, and mechanical analyses were adopted to repair a skull defect injury. After the patient was inspected by spiral CT the data was exported to Digital Imaging and Communications in Medicine (DICOM) format. The data was processed with Mimics software to eliminate noise and gray-level registration. The processing filtered out the parenchyma data and preserved the bone data. The STL files were analyzed and processed by the Magics and put into the RP equipment. The RP equipment is one type of Stereo Lithography Apparatus (SLA) with laser light spot diameter that is <0. 2mm The 3D models were analyzed to comply with the patients’ requirements. The stereo lithography model emulated the mechanical properties and shape with the patient's bone. The titanium-alloy plate matched the anatomy well. The 3D reconstructed freeform model was accurate to within 0.2 mm.
ZhangT., YanY.N., WangX.H., XiongZ., LinF., WuR.D. (2007). Three-dimensional Gelatin and Gelatin/Hyaluronan Hydrogel Structures for Traumatic Brain Injury, Journal of Bioactive and Compatible Polymers, 22(1): 19–29.
2.
WengX.H. (2002). Application of Bone Grafts and its Substitute in Spine Surgery, China Contemporary Medicine, 8(1): 33–39.
3.
ChenZ., SuZ.J., MaS.G., WuX.L., and LuoZ.Y. (2007). Biomimetic Modeling and Three-dimension Reconstruction of the Artificial Bone, Computer Methods and Programs in Biomedicine, 88(2): 123–130.
4.
BakkerA.D., SchrootenJ., van CleynenbreugelT., VanlauweJ., LuytenJ., SchepersE., DubruelP., SchachtE., LammensJ., and LuytenF.P. (2008). Quantitative Screening of Engineered Implants in a Long Bone Defect Model in Rabbits, Tissue Engineering Part C-Methods, 14(3): 251–260.
5.
XuW., WangX.H., YanY.N., ZhengW., XiongZ., LinF. (2007). Rapid Prototyping Three-dimensional Cell/Gelatin/Fibrinogen Constructs for Medical Regeneration, Journal of Bioactive and Compatible Polymers, 22(4): 363–377.
6.
FinkemeierC.G. (2002). Bone-grafting and Bone-graft Substitutes, Journal of Bone and Joint Surgery-American Volume, 84A(3): 454–464.
7.
SunQ.M. (2004). An Experimental Research of Biomimetic Compound Line with Different Component Ratio of Polymer TCP, Fourth Military Medical University PhD paper.
8.
WanW.B. (2007). Research of Rapid Prototyping in Tissue Engineering Bone Repair, Tianjin University doctor's degree paper.
9.
HeJ.K., and LiD.C. (2006). Custom Fabrication of a Composite Hemi-knee Joint based on Rapid Prototyping, Rapid Prototyping Journal, 12(4): 198–205.
10.
WenH.I., ZhangS.J., HapeshiK., and WangX.F. (2008). An Innovative Methodology of Product Design from Nature, Journal of Bionic Engineering, 5(1): 75–84.
11.
UngerR.E., SartorisA., PetersK., MottaA., MigliaresiC., KunkelM. (2007). Tissue-like Self-assembly in Cocultures of Endothelial Cells and Osteoblasts and the Formation of Microcapillary-like Structures on Three-dimensional Porous Biomaterials, Biomaterials, 28: 3965–3976.
12.
WengerA., StahlA., WeberH., FinkenzellerG., AugustinH.G., StarkG.B. (2004). Modulation of in vitro Angiogenesis in a Threedimensional Spheroidal Coculture Model for Bone Tissue Engineering, Tissue Engineering, 10: 1536–1547.
13.
HyukjinL., HyunJ.C., and TaeG.P. (2007). Perspectives on: Local and Sustained Delivery of Angiogenic Growth Factors, Journal of Bioactive and Compatible Polymers, 22: 89–114.
14.
D'UrsoP.S., AtkinsonR.L., LaniganM.W., EarwakerW.J., BruceI.J., HolmesA. (1998). Stereolithographic (SL) Biomodelling in Craniofacial Surgery. British Journal of Plastic Surgery, 51(7): 522–530.
15.
WinderJ., CookeR.S., GrayJ., FanninT., and FeganT. (1999). Medical Rapid Prototyping and 3D CT in the Manufacture of Custom made Cranial Titanium Plates, Journal of Medical Engineering & Technology, 23(1): 26–28.
16.
SunW., DarlingA., StarlyB., and NamJ. (2004). Computer-aided Tissue Engineering: Overview, Scope and Challenges, Biotechnology and Applied Biochemistry, 39(1): 29–47.
17.
SunW., StarlyB., and DarlingA. (2004). Colnputeraided Tissue Engineering: Application to Hiolnimetic Modelling and Dasign of Tissue Scaffolds, Biotechnology and Applied Biochemistry, 39(1): 49–58.
18.
HollisterS.J., MaddoxR.D., and TaboasJ.M. (2002). Optimal Design and Fabrication of Scaffolds to Mimic Tissue Properties and Satisfy Biological Constraints, Biomaterials, 23(20): 4095–4103.
19.
HutmacherD.W. (2000). Scaffolds in Tissue Engineering Bone and Cartilage, Biomaterials, 21(24): 2529–2543.
20.
HutmacherD.W., SittillaerM., and BisbudM.V. (2004). Scaffold-based Tissue Engineering Rational for Computer-aided Design and Solid Free-form Fabrication Systems, Trends Bioteclnol, 22(7): 354–362.
21.
Van TienenT.G., HeijkantsR.G.J.C., BumaP., de GrootJ.H., PenningsA.J., and VethR.P.H. (2002). Tissue Ingrowth and Degradation of Two Biodegradable Porous Polymers with Different Porosities and Pore Sizes, Biomaterials, 23(8): 1731–1738.
22.
ZhangZ., WangZ.X., and LiuS.Q. (2004). Pore Size, Tissue Ingrowth, and Endotheliatization of Small-diameter Microporous Polyurethane Vascular Prostheses, Biomaterials, 25(1): 177–187.
23.
O’ BrierF.J., HarleyB.A., and YannasI.V. (2005). The Effect of Pore Size on Cell Adhesion in Collagen-GAG Scaffolds, Biomaterials, 26(4): 433–441.
