Piezoelectric Actuator–Sensor Analysis using a Three-Dimensional Assumed Strain Solid Element

Abstract

This paper presents a piezoelectric solid element that can be used for modeling thin sensors and actuators. The element has been extended from an eighteen-node assumed strain solid element that can alleviate locking in mechanical problems. For the fully coupled mechanical-piezoelectric formulation, the electric potential is regarded as a nodal degree of freedom in addition to three translations in the original element. Consequently, the induced electric potential can be calculated for a prescribed load and the actuation displacement computed for an input voltage. Since the assumed strain solid element can relieve locking, the proposed element can also be used to analyze the behavior of very thin actuators. In addition, a finite element code was developed based on the proposed formulation and typical numerical examples were solved for code validation. Parametric studies for the THUNDER actuator have been also conducted using the code, where specific combinations of materials used for the layers plus the curvature of THUNDER were both found to improve the actuation displacement.

Get full access to this article

View all access options for this article.

References

Allik, H. and Hughes, T.J.R. 1970. “Finite Element Method for Piezoelectric Vibration,” International Journal for Numerical Method in Engineering, 2: 151–157 .

Ausserer, M.F. and Lee, S.W. 1988. “An Eighteen-node Solid Element for Thin Shell Analysis,” International Journal for Numerical Method in Engineering, 26: 1345–1364 .

Bathe, K.J. 2001. “The Inf-sup Condition and its Numerical Evaluation for Mixed Finite Element Method,” Computers and Structures, 79: 243–252 .

Benjeddou, A. 2000. “Advances in Piezoelectric Finite Element Modeling of Adaptive Structural Elements: A Survey,” Computers and Structures, 76: 347–363 .

Chee, C., Tong, L. and Steven, G. 2000. “A Mixed Model for Adaptive Composite Plates with Piezoelectric for Anisotropic Actuation,” Computers and Structures, 77: 253–268 .

Haertling, G.H. 1997. “Rainbow Actuators and Sensors: A New Smart Technology,” In: Proc. of SPIE Conference, San Diego, CA, 3–4 March, 3040: 81–92 .

Han, J. H. and Lee, I. 1997. “Active Damping Enhancement of Composite Plates With Electrode Designed Piezoelectric Materials,” Journal of Intelligent Material Systems and Structures, 8: 249–259 .

Hwang, W.S. and Park, H.C. 1993. “Finite Element Modeling of Piezoelectric Sensors and Actuator,” AIAA Journal, 31(5): 930–937 .

Hellbaum, R., Bryant, R.G. and Fox, R.L. 1997. “Thin Layer Composite Unimorph Ferroelectric Driver and Sensor”, United States Patent No. 5,632,841.

10.

Kim, Y.H. and Lee, S.W. 1988. “A Solid Element Formulation for Large Deflection Analysis of Composite Shell Structures,” Computers and Structures, 30: 269–274 .

11.

Kim, J.H., Varadan, V.V. and Varadan, V.K. 1997. “Finite Element Modeling of Structures including Piezoelectric Active Devices,” International Journal for Numerical Method in Engineering, 40: 817–832 .

12.

Kioua, H. and Mirza, S. 2000. “Piezoelectric Induced Bending and Twisting of Laminated Composite Shallow Shells,” Smart Materials and Structures, 9: 476–484 .

13.

Lee, H.J. and Saravanos, D.A. 2000. “A Mixed Multi-field Finite Element Formulation for Thermopiezoelectric Composite Shells,” International Journal for Solids and Structures, 37: 4949–4967 .

14.

Malik, M. and Noor, A.K. 2000. “Accurate Determination of Transverse Normal Stresses in Hybrid Laminated Panels Subjected to Electro-thermo-mechanical Loadings,” International Journal for Numerical Method in Engineering, 47: 477–497 .

15.

Mossi, K.M. and Bishop, R.P. 1999. “Characterization of Different Types of High Performance THUNDER,” Proc. of SPIE Conference, Newport Beach, CA, 1–5 March, Paper Number 3675-05.

16.

Park, H.C., Lim, S.M., Lee, S.K. and Yoon, K.J. 2003. “Biomimetic Wing Section Design using lightweight Piezoceramic Composite Actuator (LIPCA),” In: Proc. of SPIE Conference, 2–6 March, Paper Number 5056–21, Newport Beach, CA.

17.

Pawsey, S.F. and Clough, R.W. 1971. “Improved Numerical Integration of Thick Shell Finite Elements,” International Journal for Numerical Method in Engineering, 3: 575–586 .

18.

Sze, K.Y. and Yao, L.Q. 2000. “Modeling Smart Structures with Segmented Piezoelectric Sensors and Actuators,” Journal of Sound and Vibration, 235(3): 495–520 .

19.

Taleghani, B.K. and Campbell, J.F. 1999. “Non-linear Finite Element Modeling of THUNDER Piezoelectric Actuators”, NASA/TM-1999-209322.

20.

Tzou, H.S. 1989. “Integrated Distributed Sensing and Active Vibration Suppression of Flexible Manipulators using Distributed Piezoelectrics,” Journal of Robotic Systems, 6: 746–767 .

21.

Tzou, H.S. 1993. “Piezoelectric Shells: Distributed Sensing and Control of Continua,” Kluwer Academic Publishers, Netherlands .

22.

Yoon, K.J., Shin, S. and Park, H.C. and Goo, N.S. 2002. “Design and Manufacture of a Lightweight Piezo-composite Curved Actuator,” Smart Materials and Structures, 11: 163–168 .

23.

Zienkiewicz, O.C., Taylor, R.L. and Too, J.M. 1971. “Reduced Integration Technique in General Analysis of Plates and Shells,” International Journal for Numerical Method in Engineering, 3: 275–290 .