Layerwise Laminate Analysis of Functionally Graded Piezoelectric Bimorph Beams

Abstract

A layerwise finite element formulation developed for piezoelectric materials is used to investigate the displacement and stress response of a functionally graded piezoelectric bimorph actuator. The formulation is based on the principles of linear thermopiezoelectricity and accounts for the coupled mechanical, electrical, and thermal responses of piezoelectric materials. The layerwise laminate theory is implemented into a linear beam element in order to provide a more accurate representation of the transverse and shear effects that are induced by the increased inhomogeneities introduced through-the-thickness by the functionally graded materials. The accuracy of the formulation is verified with previously published experimental results for a piezoelectric bimorph actuator. Additional studies are conducted to analyze the impact of electric and thermal loads on the deflections and stresses in a bimorph actuator. Results of the study help to demonstrate the capability of the layerwise theory to provide a more complete representation of the through-the-thickness effects that are no longer negligible even in thin piezoelectric beams. In addition, the effects of varying piezoelectric properties through-the-thickness of the beam are shown to provide additional benefits in minimizing the induced deformations and stresses.

Keywords

finite element method layerwise laminate theory smart materials piezoelectric materials functionally graded materials

Get full access to this article

View all access options for this article.

References

Almajid, A. , Taya, M. and Hudnut, S. 2001. “Analysis of Out-of-Plane Displacement and Stress Field in a Piezocomposite Plate with Functionally Graded Microstructure,” International Journal of Solids and Structures, 38: 3377-3391 .

Dogan, A. , Tressler, J. and Newnham, R.E. 2001. “Solid-State Ceramic Actuator Designs,” AIAA Journal, 39(7): 1354-1362 .

Haertling, G.H. 1994. “Ultra-High Displacement Actuator,” American Ceramics Society Bulletin, 73: 93-96 .

Lee, C.-K. and Moon, F.C. 1989. “Laminated Piezopolymer Plates for Torsion and Bending Sensors and Actuators,” Journal of the Acoustical Society of America, 85: 2432-2439 .

Lee, H.-J. and Saravanos, D.A. 1996. “Coupled Layerwise Analysis of Thermopiezoelectric Composite Beams,” AIAA Journal, 34(6): 1231-1237 .

Liew, K.M. , He, X.Q. , Ng, T.Y. and Kitipornchai, S. 2002. “Active Control of FGM Shells Subjected to a Temperature Gradient via Piezoelectric Sensor/Actuator Patches,” International Journal for Numerical Methods in Engineering, 55: 653-668 .

Onitsuka, K. , Dogan, A. , Tressler, J.F. , Xu, Q. , Yoshikawa, S. and Newnham, R.E. 1995. “Metal-Ceramic Composite Transducer, The Moonie,” Journal of Intelligent Material Systems and Structures, 6: 447-455 .

Reddy, J.N. 2000. “Analysis of Functionally Graded Plates,” International Journal for Numerical Methods in Engineering, 47: 663-684 .

Reddy, J.N. and Cheng, Z.-Q. 2001. “Three-Dimensional Solutions of Smart Functionally Graded Plates,” Journal of Applied Mechanics, 68: 234-241 .

10.

Saravanos, D.A. and Heyliger, P.R. 1999. “Mechanics and Computational Models for Laminated Piezoelectric Beams, Plates, and Shells,” Applied Mechanics Review, 52(10): 305-320 .

11.

Wu, C.C.M. , Kahn, M. and Moy, W. 1996. “Piezoelectric Ceramics with Functional Gradients: A New Application in Material Design,” Journal of the American Ceramics Society, 79(3): 809-812 .