Impact Damage Detection in Composite Laminates Using PVDF and PZT Sensor Signals

Abstract

Low-velocity impact damage is a major concern in the design of structures made of composite materials, because impact damage is hidden and cannot be detected by visual inspection. Piezoelectric sensors can be used to detect variations in structural and material properties for structural health monitoring. In this study, polyvinylidene flouride (PVDF) and lead zirconate titanate (PZT) sensors are used for monitoring impact damage initiation and propagation in composite laminates to illustrate this potential benefit. Several tests for monitoring the stress wave signals including acoustic emission due to failure modes, such as matrix cracking, delamination, and fiber breakage are performed. A series of impact tests at various impact energies by changing the impact mass and height is performed on the instrumented drop weight impact tester. The wavelet transform (WT) and short time fourier transform (STFT) are used to decompose the piezoelectric sensor signals in this study. Test results show that the particular waveform of sensor signals implying the damage initiation and propagation are detected above the damage initiation impact energy. It is found that both PZT and PVDF sensors can be used to detect the impact damage.

Keywords

composite laminates low-velocity impact damage piezoelectric sensors impact damage detection structural health monitoring

Get full access to this article

View all access options for this article.

References

Doyle, J.F. 1984. “An Experimental Method for Determining the Dynamic Contact Law,” Experimental Mechanics, 24: 10–16 .

Guo, D. , Mal, A.K. and Ono, K. 1996. “Wave theory of Acoustic Emission in Composite Laminates,” Journal of Acoustic Emission, 14: S19–S46 .

Kim, I. and Hahn, H.T. 1993. “Prediction of Low-Energy Impact Based on Piezoelectric Sensor Signals,” ASME, AD-Vol.35: 433–439 .

Kim, I. and Kim, J. 1998. “Experimental Correlation for the Inverse Problem of Laminated Plate Subjected to Low-Velocity Impact,” Journal of the Korean Society for Composite Materials, 11(3): 24–38 .

Kim, I. and Jung, S.M. 2000. “Low-Velocity Impact Detection of Composite Plate Using Piezopolymer Sensor Signals without Charge Amplifier,” Journal of the Korean Society for Composite Materials, 13(6): 48–54 .

Kim, I. , Hahn, H.T. and Weems, D. 1992. “Impact Monitoring in Smart Composite Structures Using Piezoelectric Sensors,” In: Proceedings of 6th Japan-U.S. Conference on Composite Materials, Technomics Pub. Co., pp. 201–210 .

Lih, S.S. and Mal, A.K. 1996. “Response of Multilayered Composite Laminates to Dynamic Surface Loads,” Composites: Part B, 27B: 633–644 .

Lincoln, J.W. 2000. “USAF Experience in the Qualification of Composite Structures,” Composite Structures; Theory and Practice, ASTM STP 1383: 3–11 .

Olsson, R. , Asp, L.E. , Nilsson, S. and Sjogren, A. 2000. “A Review of Some Key Developments in the Analysis of the Effects of Impact upon Composite Structures,” Composite Structures; Theory and Practice, ASTM STP 1383: 12–28 .

10.

Park, C.Y. , Kim, I. and Lee, Y.S. 2002. “Monitoring of Low–velocity Impact Damage Initiation of Gr/Ep Panel Using Piezoelectric Thin Film Sensor,” Journal of the Korean Society for Composite Materials, 15(2): 11–17 .

11.

Shih, J.H. and Mal, A.K. 2000. “Acoustic Emission from Impact Damage in Cross–ply Composites,” Proceedings of Structural Health Monitoring 2000, Conference Proceedings, pp. 209–217 .

12.

Sung, D.U. , Oh, J.H. , Kim, C.G. and Hong, C.S. 2000. “Impact Damage Detection of Smart Composite Laminates Using Wavelet Transform,” Journal of the Korean Society for Composite Materials, 13(1): 40–49 .

13.

Wu, E. , Yeh, J.C. and Yen, C.S. 1994. “Identification of Impact Forces at Multiple Locations on Laminated Plates,” AIAA Journal, 32: 2433–2439 .

14.

Yen, C. and Wu, E. 1995. “On the Inverse Problem of Rectangular Plates Subjected to Elastic Impact, Part I: Method Development and Numerical Verification,” ASME J. of Applied Mechanics, 62: 692–698 .