Piezoelectric Energy Harvesting Device Optimization by Synchronous Electric Charge Extraction

Abstract

This article presents a nonlinear approach to optimize the power flow of vibration-based piezoelectric energy-harvesting devices. This self-adaptive principle is based on a particular synchronization between extraction of the electric charge produced by the piezoelectric element and the system vibrations, which maximizes the mechanical to electrical energy conversion. An analytical expression of the optimal power flow is derived from a simple electromechanical model. An electronic circuit designed to perform the synchronous charge extraction is proposed. Theoretical predictions confirmed by experimental results show that the new principle increases the harvested power by 400% as compared with a quasilinear impedance adaptation optimization method.

Keywords

energy harvesting self-powered renewable energy piezoelectric vibration

Get full access to this article

View all access options for this article.

References

Amirtharajah, R. and Chandrakasan, A. 2004. ‘A Micropower Programmable DSP using Approximate Signal Processing based on Distributed Arithmetic,’ IEEE Journal of Solid-State Circuits, 39(2): 337–347 .

Ayers, J. , Greve, D. and Oppenheim, I. 2003. ‘Energy Scavenging for Sensor Applications using Structural Strains,’ In: Proceedings SPIE Smart Structures and Materials Conference, Vol. 5057, pp. 364–375 .

Elvin, N.G. , Elvin, A. and Spector, M. 2001. ‘A Self-powered Mechanical Strain Energy Sensor,’ Smart Materials and Structures, 10(2): 293–299 .

Erickson, R.W. and Maksimovic, D. 2001. Fundamentals of Power Electronics, pp. 131–177, Kluwer Academic Publishers, Boston, MA , ISBN 0-7923-7270-0.

Ivensky, G. , Zafrany, I. and Ben-Yaacov, S. 2002. ‘Generic Operational Characteristics of Piezoelectric Transformers,’ IEEE Transactions on Power Electronics, 17(6): 1049–1057 .

Lesieutre, G.A. , Ottman, G.K. and Hofmann, H.F. 2003. ‘Damping as a Result of Piezoelectric Energy Harvesting,’ Journal of Sound and Vibration, 269(3–5): 991–1002 .

Ottman, G. , Hofmann, H. , Bhatt, A. and Lesieutre, G. 2002. ‘Adaptive Piezoelectric Energy Harvesting Circuit for Wireless Remote Power Supply,’ IEEE Transaction on Power Electronics, 17(5): 669–676 .

Ottman, G. , Hofmann, H. , Bhatt, A. and Lesieutre, G. 2003. ‘Optimized Piezoelectric Energy Harvesting Circuit using Stepdown Converter in Discontinuous Conduction Mode,’ IEEE Transaction on Power Electronics, 18(2): 696–703 .

Richard, C. , Guyomar, D. , Audigier, D. and Ching, G. 1999. ‘Semi Passive Damping using Continuous Switching of a Piezoelectric Device,’ In: Proceedings SPIE Smart Structures and Materials Conference, Vol. 3672, pp. 104–113 .

10.

Richard, C. , Guyomar, D. , Audigier, D. and Bassaler, H. 2000. ‘Enhanced Semi Passive Damping using Continuous Switching of a Piezoelectric Device on an Inductor,’ In: Proceedings SPIE Smart Structures and Materials Conference, Vol. 3989, pp. 288–299 .

11.

Roundy, S. , Otis, B. , Chee, Y.-H. , Rabaey, J. , and Wright, P.K. 2003a. ‘A 1.9GHz Transmit Beacon using Environmentally Scavenged Energy,’ In: ISPLED 2003 Conference, Seoul, Korea.

12.

Roundy, S. , Wright, P.K. and Rabaey, J. 2003b. ‘A Study of Low Level Vibration as a Power Source for Wireless Sensors Nodes,’ Computer Communications, 26(11): 1131–1144 .