Aeroelastic Considerations on Shape Control of an Adaptive Wing

Abstract

In this work, the aeroelastic effects on the shape control of an adaptive camber wing are studied through numerical simulation. The adaptive camber concept consists of a compliant beam, actuated by a series of piezoelectric actuators, embedded within the rib to deform the wing in an effort to produce a desired lift. Piezoelectric laminated plate theory is used to model the actuation force and the resulting camber line shape of the wing. The aerodynamic forces are calculated using two-dimensional airfoil theory and a feedback shape control algorithm is applied to obtain the desired camber. The results of the simulations demonstrate that the deformations due to aerodynamic forces are large enough to significantly alter the total lift produced by the wing as compared with the lift produced solely through actuation. Using an adaptive control algorithm, aeroelastic shape control of the adaptive camber wing is successfully achieved. Moreover, it is shown that, due to aerodynamic forces, the power requirements of shape control might be reduced.

Keywords

aeroelasticity adaptive camber morphing wing shape control

Get full access to this article

View all access options for this article.

References

Achuthan, A. , Keng, A.K. and Ming, W.C. 2001. “Shape Control of Coupled Nonlinear Piezoelectric Beams,” Smart Materials and Structures, 10(5): 914–924 .

Amprikidis, M. and Cooper, J.E. April 2003. “Development of Smart Spars for Active Aeroelastic Structures,” AIAA Paper 2003-1799.

Bae, J.S. , Seigler, T.M. and Inman, D.J. 2005. “Aerodynamic and Aeroelastic Characteristics of a Variable-Span Morphing Wing,” Journal of Aircraft, 40(2): 528–534 .

Bowman, J. , Sanders, B. and Weisshaar, T. April 2002. “Evaluating the Impact of Morphing Technologies on Aircraft Performance,” AIAA Paper 2002-1631.

Campanile, L.F. and Anders, S. 2005. “Aerodynamic and Aeroelastic Amplification in Adaptive Belt-rib Airfoils,” Aerospace Science and Technology, 9(1): 55–63 .

Chandrashekhara, K. and Varadarajan, S. 1997. “Adaptive Shape Control of Composite Beams with Piezoelectric Actuators,” J. of Intelligent Material Systems and Structures, 8(2): 112–124 .

Gern, F.H. , Inman, D.J. and Kapania, R.K. 2002. “Structural and Aeroelastic Modeling of General Planform Wings with Morphing Airfoils,” AIAA Journal, 40(4): 628–637 .

Johnston, C.O. , Neal, D.A. , Wiggins, L.D. , Robertshaw, H.H. , Mason, W.H. and Inman, D.J. April 2003. “A Model to Compare the Flight Control Energy Requirements of Morphing and Conventionally Actuated Wings,” AIAA Paper 2003-1716.

Kaz, J. and Plotkin, A. 2001. Low-speed Aerodynamics, Cambridge University Press, New York, NY .

10.

Lam, K.Y. , Peng, X.Q. , Liu, G.R. and Reddy, J.N. 1997. “A Finite-Element Model for Piezoelectric Composite Laminates,” Smart Materials and Structures, 6(5): 583–591 .

11.

Reddy, J.N. 1997. Mechanics of Laminated Plates: Theory and Analysis, Chemical Rubber Company, Boca Raton, FL .

12.

Sanders, B. , Eastep, F.E. and Foster, E. 2003. “Aerodynamic and Aeroelastic Characteristics of Wings with Conformal Control Surfaces for Morphing Aircraft,” Journal of Aircraft, 40(1): 94–99 .

13.

Wilson, J.R. 2002. “Active Aeroelastic Wing: A New/Old Twist on Flight,” Aerospace America, 40(9): 34–37 .