Modeling and Testing of the Viscoelastic Properties of a Graphite Nanoplatelet/Epoxy Composite

Abstract

To facilitate the interpretation of experimental data, a micromechanical modeling procedure is developed to predict the viscoelastic properties of a graphite nanoplatelet/epoxy composite as a function of volume fraction and nanoplatelet diameter. The storage and loss moduli predicted for the composite are compared to values measured from the same material using three test methods: dynamical mechanical analysis, nanoindentation, and quasi-static tensile tests. In most cases, the model and experiments indicate that for increasing volume fractions of nanoplatelets, both the storage and the loss moduli increase. In addition, the results indicate that for nanoplatelet sizes above 15 mm, nanoindentation is capable of measuring properties of individual constituents of a composite system. A comparison of the values predicted to the data measured helps to illustrate the relative similarities and differences between the bulk and the local measurement techniques.

Keywords

dynamical mechanical analysis micromechanics modeling nanoindentation nanotechnology

Get full access to this article

View all access options for this article.

References

Benveniste, Y. 1987. “A New Approach to the Application of Mori-Tanaka’s Theory in Composite Materials,” Mechanics of Materials, 6(2): 147-157 .

Brinson, L.C. and Lin, W.S. 1998. “Comparison of Micromechanics Methods for Effective Properties of Multiphase Viscoelastic Composites,” Composite Structures, 41(3-4): 353-367 .

Chasiotis, I. , Chen, Q. and Odegard, G.M. 2004. “Multiscale Experiments on Graphite Nanoplatelet/Epoxy Composites,” In: SEM X International Congress and Exposition on Experimental and Applied Mechanics, Costa Mesa, CA.

Chen, G.H. , Wu, D.J. , Weng, W.G. and Yan, W.L. 2001. “Preparation of Polymer/Graphite Conducting Nanocomposite by Intercalation Polymerization,” Journal of Applied Polymer Science, 82(10): 2506-2513 .

Eshelby, J.D. 1957. “The Determination of the Elastic Field of an Ellipsoidal Inclusion, and Related Problems,” Proceedings of the Royal Society of London, Series A, 241: 376-396 .

Ferry, J.D. 1980. Viscoelastic Properties of Polymers, John Wiley & Sons, Inc., New York .

Fukushima, H. and Drzal, L.T. 2002. “Graphite Nanoplatelets as Reinforcements for Polymers: Structural and Electrical Properties,” In: 17th Annual American Society for Composites Technical Conference, West Lafayette, IN.

Kampf, G. 1986. Characterization of Plastics by Physical Methods: Experimental Techniques and Practical Application, Hanser Publishers, New York .

Kelly, B.T. 1981. Physics of Graphite, Applied Science Publishers, Essex, England .

10.

Menard, K.P. 1999. Dynamic Mechanical Analysis: A Practical Introduction, CRC Press, Boca Raton, FL .

11.

Mori, T. and Tanaka, K. 1973. “Average Stress in Matrix and Average Elastic Energy of Materials with Misfitting Inclusions,” Acta Metallurgica, 21(5): 571-574 .

12.

Mura, T. 1982. Micromechanics of Defects in Solids, Martinus Nijhoff, The Hague .

13.

Odegard, G.M. , Clancy, T.C. and Gates, T.S. 2005a. “Modeling the Mechanical Properties of Nanoparticle/Polymer Composites,” Polymer, 46(2): 553-562 .

14.

Odegard, G.M. , Frankland, S.J.V. and Gates, T.S. 2005b. “The Effect of Nanotube Functionalization on the Elastic Properties of Polyethylene Nanotube Composites,” AIAA Journal (in press).

15.

Odegard, G.M. , Gates, T.S. and Herring, H.M. 2005c. “Characterization of Viscoelastic Properties of Polymeric Materials Through Nanoindentation,” Experimental Mechanics, 45(2): 130-136 .

16.

Odegard, G.M. , Gates, T.S. , Nicholson, L.M. and Wise, K.E. 2002. “Equivalent-Continuum Modeling of Nano-Structured Materials,” Composites Science and Technology, 62(14): 1869-1880 .

17.

Odegard, G.M. , Gates, T.S. , Wise, K.E. , Park, C. and Siochi, E. 2003. “Constitutive Modeling of Nanotube-Reinforced Polymer Composites,” Composites Science and Technology, 63(11): 1671-1687 .

18.

Pan, Y.X. , Yu, Z.Z. , Ou, Y.C. and Hu, G.H. 2000. “A New Process of Fabricating Electrically Conducting Nylon 6/Graphite Nanocomposites via Intercalation Polymerization,” Journal of Polymer Science Part B: Polymer Physics, 38(12): 1626-1633 .

19.

Thongruang, W. , Balik, C.M. and Spontak, R.J. 2002. “Volume-Exclusion Effects in Polyethylene Blends Filled with Carbon Black, Graphite, or Carbon Fiber,” Journal of Polymer Science Part B: Polymer Physics, 40(10): 1013-1023 .

20.

Yalcin, B. , Valladares, D. and Cakmak, M. 2003. “Amplification Effect of Platelet Type Nanoparticles on the Orientation Behavior of Injection Molded Nylon 6 Composites,” Polymer, 44(22): 6913-6925 .

21.

Zheng, G.H. , Wu, J.S. , Wang, W.P. and Pan, C.Y. 2004. “Characterization of Expanded Graphite/Polymer Composites Prepared by in situ Polymerization,” Carbon, 42(14): 2839-2847 .