Experimental Investigation on Electrochemical Properties of Ionic Polymer

Abstract

Platinum has been used as an effective electrode material for ionic polymer– metal composite (IPMC) actuators. Realizing that platinum is a common catalyst for many electrochemical reactions; the platinum surface in IPMCs allows many components to be adsorbed. Therefore, under imposed electrical potentials, platinum electrodes used for IPMCs introduce complex electrochemical phenomena on the platinum–electrolyte interface. This study points out that the electrochemical characteristics of platinum are important in understanding the fundamental actuation mechanism of IPMCs. Electrochemical analyses, including voltammetry, AC impedance, and capacitance measurements, on IPMC samples are carried out in aqueous solutions. Such experimental results reveal the complex electrochemical behavior of IPMCs, including inductive behavior in higher frequencies than has originally been expected. The Mott-Schottky experiment is also performed to investigate the charge transfer and the possible adsorption mechanism associated with IPMCs. Seemingly, the equivalent circuit of IPMC follows a RLC circuit.

Keywords

electrochemistry ionic polymer–metal composites (IPMCs)

Get full access to this article

View all access options for this article.

References

Asaka, K. , Oguro, K. , Nishimura, Y. , Mizuhata, M. and Takenaka, H. (1995). “Bending of Polyelectrolyte Membrane-Platinum Composites by Electric Stimuli, I. Response Characteristics to Various Waveforms,” Polymer Journal, 27(4): 436–440 .

Daniel, B. and Ward, M.D. (1992). “Measurement of Interfacial Processes at Electrode Surfaces with the Electrochemical Quartz Crystal Microbalance,” Chem. Rev., 92(6): 1355–1379 .

Farinholt, K. and Leo, D. (2004). “Modeling of Electromechanical Charge Sensing in Ionic Polymer Transducers,” Mechanics of Materials, 36: 421–433 .

Irie, M. (1986). “Reversible Bending of Gels in an Electric Field,” Macromolecules, 19: 2890–2892 .

Kim, K.J. and Shahinpoor, M. (2003). “Ionic Polymer-metal Composites: II. Manufacturing Techniques,” Smart Materials and Structures, 12: 65–79 .

Kim, D. , Jung, I. , Lee, J. , Oh, I.H. , Ha, H. , Hong, S. and Tak, Y. (2004). “Investigation of Hydrogen Adsorption Behaviors in the Presence of Methanol and Dissolved Oxygen using Electrochemical Quartz Crystal Microbalance,” Electrochimica Acta, 50: 693–697 .

Kurauchi, T. , Shiga, T. , Hirose, H. and Okada, A. (1987). “Deformation Behavior of Polymer Gels in Electric Field,” Japanese Polymer Reprints, 36: 2894-2894 .

Liu, R. , Her, W. and Fedkiw, P.S. (1992). “In situ Electrode Formation on a Nafion Membrane by Chemical Platinization,” Journal of Electrochemical Society, 139(1): 15–23 .

Nemat-Nasser, S. (2002). “Micro-mechanics of Actuation of IonicPolymer-Metal Composites,” Journal of Applied Physics, 92: 2899–2915 .

10.

Osada, Y. and Hasebe, M. (1985).“Bending of Ionic Gels in an Electric Field,” Chemical Letters, 1285-1285.

11.

Osada, Y. (1992). “Electro-Stimulated Chemomechanical System Using Polymer Gels (An Approach to Intelligent Artificial Muscle System),” In: Proceeding of the International Conference on Intelligent Materials, The Society of Non-traditional Technology, Tokyo, pp. 155–161 .

12.

Paquette, J.W. , Kim, K.J. and Kim, D. (2005). “Low Temperature Characteristics of Ionic Polymer-Metal Composite Actuators,” Sensors and Actuators A: Physical, 118: 135–143 .

13.

Shahinpoor, M. (1994). “Microelectro–Mechanics of Ionic Polymeric Gels as Artificial Muscles for Robotic Applications,” Smart Material and Structures, 3: 367–372 .

14.

Shahinpoor, M. (1999). “Electro-mechanics of Iono-elastic Beams as Electrically Controllable Artificial Muscles,” In: SPIE Proceedings, pp. 109–120.

15.

Shahinpoor, M. and Kim, K.J. (2001). “Ionic Polymer-metal Composites: I. Fundamentals,” Smart Materials and Structures, 10: 1–15 .

16.

Tadokoro, S. , Takamori, T. and Oguro, K. “Modeling IPMC for Design of Actuation Mechanisms,” In: Bar-Cohen, Y. (ed.), Electroactive Polymer (EAP) Actuators as Artificial Muscles, Reality, Potential, and Challenges, SPIE Press, Washington, USA .

17.

Takenaka, H. , Torikai,E. , Kawami, Y. and Wakabayashi, N. (1982). “Solid Polymer Electrolytes Water Electrolysis,” Int. J. Hydrogen Energy, 7: 397-397 .

Experimental Investigation on Electrochemical Properties of Ionic Polymer–Metal Composite

Abstract

Keywords

Get full access to this article

References