Actuation of the Artificial Muscle Based on Ionic Polymer Metal Composite by Electromyography (EMG) Signals

Abstract

This article proposes an ionic polymer metal composite (IPMC) actuating system with a biomimetic function. Electromyography (EMG) signals generated by an intended contraction of muscles in the human forearm are used as controlling signals for actuating the IPMC. By controlling this with EMG signals generated from the human flexor carpi ulnaris and extensor carpi ulnaris muscles, we investigated the actuation behavior of the IPMC based on Nafion. To obtain higher actuation force of the IPMC, the single layered IPMC, as thick as 800 mm, or multi-layered IPMC of which each layer is as thick as 178 mm are prepared. The experimental results using an implemented IPMC control system show a possibility and a usability of the biomimetic artificial muscle.

Keywords

artificial muscle IPMC biomimetic device electromyography (EMG)

Get full access to this article

View all access options for this article.

References

Abe, Y. , Mochizuki, A. , Kawashima, T. , Yamashita, S. , Asaka, K. and Takenaka, H. 1995. “Bending of Polyelectrolyte Membrane-platinum Composites by Electric Stimuli I. Response Characteristics to Various Waveforms,” Polymer Journal, 27(4): 436-440 .

Asaka, K. , Oguro, K. , Nishimura, Y. , Mizuhata, M. and Takenaka, H. 1995. “Bending of Polyelectrolyte Membrane-platinum Composites by Electric Stimuli I. Response Characteristics to various Waveforms,” Polymer Journal, 27(4): 436-440 .

Bar-Cohen, Y. 2001. Electroactive Polymer (EAP) Actuators as Artificial Muscles: Reality, Potential, and Challenges, SPIE Press, Bellingham, WA .

De Luca, C. J. 1997. “The use of Surface Electromyography in Biomechanics,” Journal of Applied Biomechanics, 13: 135-163 .

De Luca, C. J. 2002. Surface Electromyography: Detection and Recording, Delsys Incorporated, Boston, MA .

Kim, K. J. and Shahinpoor, M. 2002. “A Novel Method of Manufacturing Three-dimensional Ionic Polymer-metal Composites (IPMC’s) Biomimetic Sensors, Actuators and Artificial Muscle,” Polymer, 43(3): 797-802 .

Moritani, T. and Yoshitake, Y. 1998. “The Use of Electromyography in Applied Physiology,” Journal of Electromyography and Kinesiology, 8: 363-381 .

Oguro, K. , Fujiwara, N. , Asaka, K. , Onishi, K. and Sewa, S. 1999. “Polymer Electrolyte Actuator with Gold Electrodes,” In: Proc. of SPIE-Int. Soc. Opt. Eng., Vol. 3669, pp. 64-71 .

Rashid, T. and Shahinpoor, M. 1999. “Force Optimization of Ionic Polymeric Platinum Composite Artificial Muscles by Means of Orthogonal Array Manufacturing Method,” In: Proc. SPIE-Int. Soc. Opt. Eng., Vol. 3669, pp. 289-298 .

10.

Shahinpoor, M. and Kim, K. J. 2000. “The Effect of Surface-electrode Resistance on the Performance of Ionic Polymer-metal Composite (IPMC) Artificial Muscles,” Smart Material and Structure, 9: 543-551 .

11.

Shahinpoor, M. and Kim, K. J. 2001. “Ionic Polymer-metal Composites: I. Fundamentals,” Smart Material and Structure, 10: 819-833 .