Finite Element Analysis of Multi-axis Strain Sensitivities of Bragg Gratings in PM Fibers

Abstract

This article presents a numerical analysis of the sensitivity of fiber Bragg grating (FBG) sensors written into polarization maintaining fibers to transverse and thermal loading. These sensors are typically applied for the measurement of multiple strain components for the monitoring of civil structures. The finite element analysis includes both the optical and mechanical variations in the optical fiber. Five fiber types typically used in FBG sensors (elliptical core, D-fiber, elliptical core SAP, Bow-Tie, and Panda) are compared. It is shown that when only the fiber geometry is considered while the material parameters are approximately the same, the D-fiber demonstrates the highest sensitivity to transverse loading. In addition, it is shown that reducing the fiber cladding diameter significantly improves the sensitivities of the FBG sensor to transverse loads. All fiber types exhibit approximately the same sensitivity to thermal loading.

Keywords

Bragg grating transverse strain finite element method polarization maintaining fiber multi-axis loading

Get full access to this article

View all access options for this article.

References

Bèlanger, P.A. 1993. Optical Fiber Theory — A Supplement to Applied Electromagnetism , World Scientific, River Edge, NJ.

Bosia, F. , Giaccari, P. , Botsis, J. , Facchini, M. , Limberger, H.G. and Salathè R.P. 2003. ``Characterization of the Response of Fibre Bragg Grating Sensors Subjected to a Two-Dimensional Strain Field,'' Smart Materials and Structures, 12(6):925—934.

Chehura, E. , Ye, C.C. , Staines, S.E. , James, S.W. and Tatam, R.P. 2004. ``Characterization of the Response of Fibre Bragg Gratings Fabricated in Stress and Geometrically Induced High Birefringence Fibres to Temperature and Transverse Load,'' Smart Materials and Structures , 13(4):888—895.

Doyle, C. , Martin, A. , Liu, T. , Wu, M. , Hayes, S. , Crosby, P.A. , Powell, G.R. , Brooks, D. and Fernando, G.F. 1998. ``In-situ Process and Conditioning Monitoring of Advanced Fibre-Reinforced Composite Materials using Optical Fibre Sensors,'' Smart Materials and Structures, 7(2):145—158.

Kang, H.K. , Kang, D.H. , Hong, C.S. and Kim, C.G. 2003. ``Simultaneous Monitoring of Strain and Temperature During and After Cure of Unsymmetric Composite Laminate using Fibre-Optic Sensors ,'' Smart Materials and Structures, 12(1):29—35.

Kim, K.S. , Kollàr, L. and Springer, G.S. 1993. ``A Model of Embedded Fiber Optic Fabry-Perot Temperature and Strain Sensors,'' Journal of Composite Materials, 27(17):1618—1662.

Koshiba, M. 1992. Optical Waveguide Theory by the Finite Element Method , Kluwer Academic Publishers, Boston, MA.

Lawrence, C.M. , Nelson, D.V. , Udd, E. and Bennett, T. 1999. ``A Fiber Optic Sensor for Transverse Strain Measurement ,'' Experimental Mechanics, 39(3):202—209.

Leng, J.S. and Asundi, A. 2002. ``Real-Time Cure Monitoring of Smart Composite Materials using Extrinsic Fabry-Perot Interferometer and Fiber Bragg Grating Sensors ,'' Smart Materials and Structures, 11(2):249—255.

10.

Liu, Y. , Rahman, B.M.A. and Grattan, K.T.V. 1994. ``Thermal-Stress-Induced Birefringence in Bow-Tie Optical Fibers,'' Applied Optics, 33(24):5611—5616.

11.

Murukeshan, V.M. , Chan, P.Y. , Ong, L.S. and Seah, L.K. 2000. ``Cure Monitoring of Smart Composites using Fiber Bragg Grating Based Embedded Sensors,'' Sensors and Actuators A-Physical , 79(2):153—161.

12.

Nye, J.F. 2003. Physical Properties of Crystals, Oxford University Press, New York.

13.

O'Dwyer, M.J. , Maistros, G.M. , James, S.W. , Tatam, R.P. and Partridge, I.K. 1998. ``Relating the State of Cure to the Real-Time Internal Strain Development in a Curing Composite using In-fibre Bragg Gratings and Dielectric Sensors,'' Measurement Science and Technology, 9(8):1153—1158.

14.

Prabhugoud, M. and Peters, K. 2006. ``Finite Element Model for Embedded Fiber Bragg Grating Sensor,'' Smart Materials and Structures, 15(2):550—562.

15.

Sirkis, J.S. 1993. ``Unified Approach to Phase-Strain-Temperature Models for Smart Structure Interferometric Optical Fiber Sensors: Part 1, Development ,'' Optical Engineering, 32(4):752—761.

16.

Takeda, N. and Okabe, Y. 2005. ``Durability Analysis and Structural Health Management of Smart Composite Structures using Small-Diameter Fiber Optic Sensors,'' Science and Engineering of Composite Materials, 12(1—2):1—12.

17.

Uranczyk, W. , Chmielewska, E. and Bock, W.J. 2001. ``Measurements of Temperature and Strain Sensitivities of a Two-Mode Bragg Gratings Imprinted in a Bow-Tie Fibre,'' Measurement Science and Technology, 12(7):800—804.