Field Test on Vibration Control of Vehicle Suspension System Featuring ER Shock Absorbers

Abstract

This study presents vibration control responses of a passenger vehicle equipped with continuously controllable electrorheological (ER) shock absorbers. As a first step, four ER shock absorbers (two for front parts and two for rear parts) are designed and manufactured based on the damping force levels and mechanical dimensions required for the middle-sized passenger vehicle. After experimentally evaluating the field-dependent damping force property and controllability, the manufactured ER shock absorbers are incorporated with the suspension of a car to be tested. Subsequently, the skyhook control algorithm, which is simple, but very effective in real field, is formulated by considering vertical, pitch, and roll motions. The controller is then realized by integrating feedback sensors, such as accelerometer and the field test is undertaken under bump and random road conditions. The control responses for the ride quality and steering stability are evaluated in both time and frequency domains. In addition, the performance comparison between conventional suspension and ER suspension is carried out.

Keywords

field test electrorheological shock absorber vehicle suspension skyhook control.

Get full access to this article

View all access options for this article.

References

Choi, S.B. , Choi, Y.T. , Chang, E.G. and Han, S.J. 1998. `` Control Characteristics of a Continuously Variable ER Damper,'' Mechatronics, 8(2): 143—161 .

Nakano, M. and Novel, A. 1996. `` A Novel Semi-active Control of Automotive Suspension using an Electrorheological Shock Absorber ,'' In: Proceedings of the 5th International Conference on ER fluids, MR Suspensions and Associated Technology, World Scientific, Singapore , pp. 645—653.

Peel, D.J. , Stanway, R. and Bullough, W.A. 1998. `` Modeling and Control of an ER Long-stroke Vibration Damper ,'' In: Proceedings of SPIE on Smart Structures and Materials, San Diego, USA, pp. 416—427.

Petek, N.K. , Romstadt, D.L. , Lizell, M.B. and Weyenberg, T.R. 1995. ``Demonstration of an Automotive Semi-active Suspension using Electro-rheological Fluid,'' SAE Technical Paper Series 950586.

Sturk, M. , Wu, X.M. and Wong, J.Y. 1995. `` Development and Evaluation of a High Voltage Supply Unit Electro-rheological Fluid Dampers,'' Vehicle System Dynamics , 24(2): 101—121 .

Wereley, N.M. and Pang, L. 1998. `` Nondimensional Analysis of Semi-active Electrorheological and Magnetorheological Dampers using Approximate Parallel Plate Models ,'' Smart Materials and Structures, 7(5): 732—743 .