Variable Stiffness Structures Utilizing Fluidic Flexible Matrix Composites

Abstract

In this research, the capability of utilizing fluidic flexible matrix composites (F²MC) for autonomous structural tailoring is investigated. By taking advantage of the high anisotropy of flexible matrix composite (FMC) tubes and the high bulk modulus of the pressurizing fluid, significant changes in the effective modulus of elasticity can be achieved by controlling the inlet valve to the fluid-filled F²MC structure. The variable modulus F²MC structure has the flexibility to easily deform when desired (open-valve), possesses the high modulus required during loading conditions when deformation is not desired (closed-valve — locked state), and has the adaptability to vary the modulus between the flexible/stiff states through control of the valve. In the current study, a 3D analytical model is developed to characterize the axial stiffness behavior of a single F²MC tube. Experiments are conducted to validate the proposed model, and the test results show good agreement with the model predictions. A closed/open modulus ratio as high as 56 times is achieved experimentally. With the validated model, an F²MC design space study is performed. It is found that by tailoring the properties of the FMC tube and inner liner, a wide range of moduli and modulus ratios can be attained. By embedding multiple F²MC tubes side by side in a soft matrix, a multi-cellular F²MC sheet with a variable stiffness in one direction is constructed. The stiffness ratio of the multi-cellular F²MC sheet obtained experimentally shows good agreement with a model developed for this type of structure. A case study has been conducted to investigate the behavior of laminated [+60/0/-60]_s multi-cellular F²MC sheets. It is shown that the laminate can achieve tunable, steerable, anisotropy by selective valve control.

Keywords

Structural tailoring adaptive stiffness flexible matrix composite fluidic flexible matrix composite fiber composite.

Get full access to this article

View all access options for this article.

References

Albanese, A.M. and Cunefare, K.A. 2004. ``Smart Fabric Adaptive Stiffness for Active Vibration Absorbers,'' In: Proc. SPIE-The International Society for Optical Engineering, v5398.

Boresi, A.P. , Schmidt, R.J. and Siderbottom, O.M. 1993. ``The thick-wall cylinder,'' Advanced Mechanics of Materials, Ch. 11, 5th edn, John Wiley & Sons Inc., New York .

Davis, L.C. 1999. ``Model of Magnetorheological Elastomer, '' Journal of Applied Physics, 85(6):3348-3351.

Downey, P.R. and Dapino, M.J. 2005. ``Extended Frequency Bandwidth and Electrical Resonance Tuning in Hybrid Terfenol-D/PMN-PT Transducers in Mechanical Series Configuration,'' Journal of Intelligent Material Systems and Structures, 16(9):757-772.

Faidley, L.E. , Dapino, M.J. , Washington, G.N. and Lograsso, T.A. 2006. ``Modulus Increase with Magnetic Field in Ferromagnetic Shape Memory Ni-Mn-Ga,'' Journal of Intelligent Material Systems and Structures, 17(2):123-131.

Hodgson, D.E. , Wu, M.H. and Biermann, R.J. 1990. ``Shape Memory Alloys,'' from Metals Handbook , Vol. 2, 10th edn, ASM International, Metals Park, Ohio .

Hyer, M.W. 1998. Stress Analysis of Fiber-reinforced Composite Materials , McGraw-Hill Inc., Boston.

Kornbluh, R. , Prahlad, H. , Pelrine, R. , Standford, S. , Rosenthal, M. and von Guggenberg, P. 2004. ``Rubber to Rigid, Clamped to Undamped: Toward Composite Materials with Wide-Range Controllable Stiffness and Damping,'' In: Proc. SPIE-The International Society for Optical Engineering, v5388.

Lekhnitskii, S.G. 1963. ``The State of Stress of a Body Bounded by a Cylindrical Surface and Possessing Cylindrical Anisotropy in which the Stresses do not Vary Along the Generator,'' Theory of Elasticity of an Anisotropic Body, Holden-Day Inc., San Francisco.

10.

Liu, C. , Chun, S.B. , Mather, P.T. , Zheng, L. , Haley, E.H. and Coughlin, E.B. 2002. ``Chemically Cross-Linked Polycyclooctene: Synthesis, Characterization, and Shape Memory Behavior,'' Macromolecules , 35(27):9868-9874.

11.

Okuzaki, H. and Funasaka, K. 2000. ``Electromechanical Properties of a Humido-Sensitive Conducting Polymer Film,'' Macromolecules, 33(22):8307-8311.

12.

Philen, M. , Shan, Y. , Bakis, C.E. , Wang, K.W. and Rahn, C.D. 2006. ``Variable Stiffness Adaptive Structure Utilizing Hydraulically Pressurized Flexible Matrix Composites with Valve Control,'' In: Proc. 14th AIAA/ASME/AHS Adaptive Structures Conference, Newport, RI.

13.

Philen, M. , Shan, Y. , Prakash, P. , Wang, K.W. , Rahn, C.D. , Zydney, A.L. and Bakis, C.E. 2007. ``Fibrillar Network Adaptive Structure with Ion Transport Actuation,'' Journal of Intelligent Material Systems and Structures , 18(4):323-334.

14.

Prock, B. , Weisshaar, T. and Crossley, W. 2002. ``Morphing Airfoil Shape Change Optimization with Minimum Actuator Energy as an Objective,'' In: Proc. 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Atlanta, Georgia.

15.

Shan, Y. and Bakis, C.E. 2005. ``Flexible Matrix Actuators,'' In: Proc. 29th Annual Technical Conference, American Society for Composites, Philadelphia, PA.

16.

Shan, Y. , Bakis, C.E. , Philen, M. , Wang, K.W. and Rahn, C.D. 2006. ``Nonlinear Finite Axisymmetric Deformation of Flexible Matrix Composite Membranes under Internal Pressure and Axial Force, '' Composites Science and Technology, 66(15):3053-3066.

17.

Sun, C.T. and Li, S. 1988. ``Three Dimensional Effective Elastic Constants for Thick Laminates,'' Journal of Composite Materials, 22(7):629-645.

18.

Tobushi, H. , Hara, H. , Yamada, E. and Hayashi, S. 1996. ``Thermomechanical Properties in a Thin Film of Shape Memory Polymer of Polyurethane Series,'' In: Proc. SPIE-The International Society for Optical Engineering, v2716.