Design of a Robust,High-rate Wireless Sensor Network for Static and Dynamic Structural Monitoring

Abstract

Over recent years, there has been much interest in the use of low-cost wireless transceivers for communication of sensor data to alleviate the expense of widely distributed cable-based sensors in structural monitoring systems. However, while the number of unique wireless sensor platforms has continued to expand rapidly, the lack of success in replicating the number of deployed sensors and sampling rates utilized in previous cable-based systems has led to disillusionment over their use for this application. This article presents a wireless sensing system designed for concurrent measurement of both static and dynamic structural response through strain transducers, accelerometers, and temperature sensors. The network protocol developed supports real-time, high-rate data acquisition from large wireless sensor arrays with essentially no data loss. The current network software enables high-rate acquisition of up to 40 channels across 20 wireless units on a single peer-to-peer network with system expansion enabled through additional networks operating simultaneously on adjacent communication channels. Elements of the system design have been specifically tailored towards addressing condition assessment of highway bridges through strain-based load ratings as well as vibration-based dynamic analysis. However, the flexible system architecture enables the system to serve essentially as an off-the-shelf solution for a wide array of wireless sensing tasks. The wireless sensing units and network performance have been validated through laboratory tests as well as dense large-scale field deployments on an in-service highway bridge.

Keywords

structural health monitoring wireless sensor networks vibration monitoring load rating bridge inspection.

Get full access to this article

View all access options for this article.

References

Chase, S.B. 2005. ``The Role of Sensing and Measurement in Achieving FHWA's Strategic Vision for Highway Infrastructure,'' In: Ansari, F. (ed.), Sensing Issues in Civil Structural Health Monitoring, pp. 23-32, Springer, Netherlands.

Griffiths, D.J. 2006. Introduction to Electrodynamics, 3rd edn, p. 576, Prentice-Hall, New Delhi, India.

Kata, M. and Shimada, S. 1986. ``Vibration of PC Bridge during Failure Process , '' Journal of Structural Engineering, 112(7):1692-1703.

Lynch, J.P. and Loh, K.J. 2006. ``A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring,'' The Shock and Vibration Digest, 38(2): 91-128.

Lynch, J.P. , Sundararajan, A. , Law, K.H. , Kiremidjian, A.S. and Carryer, E. 2004. ``Embedding Damage Detection Algorithms in a Wireless Sensing Unit for Operational Power Efficiency,'' Smart Materials and Structures, 13(4):800-810.

Lynch, J.P. , Wang, Y. , Loh, K.J. , Yi, J.-H. and Yun, C.-B. 2006. ``Performance Monitoring of the Geumdang Bridge using a Dense Network of High-resolution Wireless Sensors, '' Smart Materials and Structures, 15(6):1561-1575.

Moore, M. , Phares, B. , Graybeal, B. , Rolander, D. and Washer, G. 2001. Reliability of Visual Inspection for Highway Bridges, Volume 1: Final Report. Federal Highway Administration . FHWA-RD-01-020.

Paek, J. , Jang, O.G.K.-Y , Nishimura, D. , Govindan, R. , Caffrey, J. , Wahbeh, M. and Masri, S. 2006. ``A Programmable Wireless Sensing System for Structural Monitoring,'' In: 4th World Conference on Structural Control and Monitoring, San Diego, CA.

Pakzad, S.N. , Fenves, G.L. , Kim, S. and Culler, D.E. 2008. ``Design and Implementation of Scalable Wireless Sensor Network for Structural Monitoring,'' Journal of Infrastructure Systems, 14:89-101.

10.

Wenzel, H. and Pichler, D. 2005. Ambient Vibration Monitoring, John Wiley & Sons Ltd, West Sussex, England.

11.

Whelan, M.J. , Fuchs, M.P. and Janoyan, K.D. 2008. ``Large Scale Remote Sensing for Environmental Monitoring of Infrastructure,'' Journal of Environmental Monitoring , 10:812-816.