A Comparative Study of Statistical Outlier Analysis and ANN Methods for Damage Detection and Assessment in Composite Structures

Abstract

This article introduces some of the experimental and analytical work in damage detection applied to polymeric composite T-joints used in maritime structures. Two methods of damage detection are discussed — A statistics-based outlier technique and one using artificial neural networks (ANNs). The SHM using ANNs system was found to be capable of not only detecting the presence of multiple delaminations in a composite structure, but also capable of determining the location and extent of all the delaminations present in the T-joint structure, regardless of the load (angle and magnitude) acting on the structure. The system developed, relies on the examination of the strain distribution of the structure under operational loading. Finally, on testing the SHM system developed with strain signatures of composite T-joint structures, subjected to variable loading, embedded with all possible damage configurations (including multiple damage scenarios), an overall damage (location and extent) prediction accuracy of 88.32% was achieved. These results are presented and discussed in detail in this article.

Keywords

damage detection artificial neural networks delamination T-joint composite.

Get full access to this article

View all access options for this article.

References

Baker, A. , Dutton, S. and Kelly, D. 2004. Composite Materials for Aircraft Structures, 2nd edn, American Institute of Aeronautics and Astronautics, Reston.

Greene, E. 1998. Marine Composites, Davis Consulting Group, Available at: www.marinecomposites.com (accessed 5 March 2005).

Hull, D. and Clyne, T.W. 1996. An Introduction to Composite Materials, 2nd edn, Cambridge University Press, Cambridge. Kesavan , A. , Deivasigamani, M. , John, S. and Herszberg, I. 2005. ‘‘Detection of Delaminations in Composite Structures using Optimised Neural Networks,’’ In: Proceedings of ICAI-05, Las Vegas, USA.

Kesavan, A. , Deivasigamani, M. , John, S. and Herszberg, I. 2006. ‘‘Damage Detection in T-joint Composite Structures ,’’ Composite Structures, 75(1-4):313-320.

Kesavan, A. , Deivasigamani, M. , John, S. and Herszberg, I. 2006. ‘‘Structural Health Monitoring of Composite T-joints for Assessing the Integrity of Damage Zones,’’ In: Proceedings of Smart Structures and Integrated Systems Conference , San Diego, USA.

Kesavan, A. 2006. ‘‘Embedded Intelligence in Structural Health Monitoring Using Artificial Neural Networks,’’ Ph.D. Thesis, School of Aerospace, Mechanical & Manufacturing Engineering, RMIT University , Melbourne, Australia.

Kesavan, A. , John, S. and Herszberg, I. 2008a. ‘‘Structural Health Monitoring of Composite Structures Using Artificial Intelligence Protocols, ’’ Journal of Intelligent Material Systems and Structures, 19(1):63-72.

Kesavan, S. , John, I. and Herszberg. 2008b. ‘‘Strain-based Structural Health Monitoring of Complex Composite Structures,’’ Structural Health Monitoring Journal , 7(3):203-213.

Li, H.C.H. , Herszberg, I. and Mouritz, A.P. 2006. ‘‘Automated Characterisation of Structural Disbonds by Statistical Examination of Bond-Line Strain Distribution,’’ Structural Health Monitoring, 5(1):83-94.

10.

Li, H.C.H. , Davis, C. , Herszberg, I. , Mouritz, A.P. , Galea, S.C. and Thomson, R.S. 2003. ‘‘Application of Fibre Optic Strain Sensors for the Health Monitoring of Adhesively Bonded Composite Ship Joints,’’ In: Proceeding of the 4th International Workshop on Structural Health Monitoring, Stanford University, CA, USA, pp. 1327-1334.

11.

Mallick, P.K. 1988. Fibre-Reinforced Composites: Materials, Manufacturing & Design, 1st edn, Marcel Dekker Inc, USA.

12.

Marsh, G. 2004. ‘‘Composites lift-off in Primary Aerostructures ,’’ Reinforced Plastics, 48(4):22-27.

13.

Mickens, T. , Schuiz, M. , Sundaresan, M. and Ghoshal, A. 2003. ‘‘Structural Health Monitoring of an Aircraft Joint,’’ Mechanical Systems and Signal Processing , 17(2):285-303.

14.

Schwartz, M.M. 1996. Composite Materials: Processing, Fabrication and Applications , 1stedn, Prentice Hall PTR , New Jersey.

15.

Smith, C.S. 1990. Design of Marine Structures in Composites Materials , 1stedn, Elsevier Science Publishers Ltd , UK.

16.

Zou, Y. , Tong, L. and Steven, G.P. 2000. ‘‘Vibration-based Model-dependent Damage Identification and Health Monitoring for Composite Structures, ’’ Journal of Sound and Vibration, 230(2):357-378.