Damage Identification in Thick Steel Beam Based on Guided Ultrasonic Waves

Abstract

Most current studies of guided-wave-based damage detection have been conducted on thin plate-like structures. This article presents a study of damage identification based on activated ultrasonic waves in a thick steel beam. The diagnosis procedure, with key parameters such as excitation frequency and cycle number of the diagnostic waveform, is elaborated in relation to beam dimension as well as pulse-echo/pitch-catch configurations of PZT active sensors attached to the beam. Finite element simulation was conducted to characterize wave propagation in the beam, and the signals of wave propagation were experimentally measured; the results show good agreement with outcomes of the simulation. To aid damage identification, the group velocity of the guided wave was calculated using the envelope of the signal, which was obtained by Hilbert transform. The results for damage location and severity assessment demonstrate that the guided-wave-based damage identification approach can also be applied to certain thick structures for the purpose of structural health monitoring.

Keywords

guided ultrasonic waves damage identification thick beam group velocity.

Get full access to this article

View all access options for this article.

References

Abaqus, I. 2007. ABAQUS Analysis User’s Manual, Volume II: Analysis, SIMULIA.

Diligent, O. , Grahn, T. , Bostrom, A. , Cawley, P. and Lowe, M.J.S. 2002. ‘‘The Low-frequency Reflection and Scattering of the S [sub 0] Lamb Mode from a Circular Through-thickness Hole in a Plate: Finite Element, Analytical and Experimental Studies,’’ The Journal of the Acoustical Society of America, 112:2589-2601.

Dugundji, J. 1958. ‘‘Envelopes and Pre-envelopes of Real Waveforms ,’’ IRE Transactions on Information Theory, 4:53-57.

Ihn, J.B. and Chang, F.K. 2004. ‘‘Detection and Monitoring of Hidden Fatigue Crack Growth Using a Built-in Piezoelectric Sensor/Actuator Network I. Diagnostics,’’ Smart Materials & Structures , 13:609-620.

Jeong, H.D. 2000. ‘‘Detection of Defects in a Thin Steel Plate Using Ultrasonic Guided wave,’’ In: 15th World Conference on Nondestructive Testing, Rome, Italy.

Kessler, S.S. , Spearing, S.M. and Soutis, C. 2002. ‘‘Damage Detection in Composite Materials Using Lamb Wave Methods,’’ Smart Materials and Structures, 11:269-278.

Lamb, H. 1917. ‘‘On Waves in an Elastic Plate’’ Proceedings of the Royal Society of London. Series A (Containing Papers of a Mathematical and Physical Character), 93:114-128.

Lee, B.C. and Staszewski, W.J. 2003. ‘‘Modelling of Lamb Waves for Damage Detection in Metallic Structures: Part II. Wave Interactions with Damage,’’ Smart Materials & Structures, 12:815-824.

Lu, Y. , Ye, L. , Su, Z. , Zhou, L. and Cheng, L. 2009. ‘‘Artificial Neural Network (ANN)-based Crack Identification in Aluminum Plates with Lamb Wave Signals,’’ Journal of Intelligent Material Systems and Structures , 20:39-49.

10.

Raghavan, A. and Cesnik, C.E.S. 2007. ‘‘Review of Guided-wave Structural Health Monitoring,’’ Shock and Vibration Digest , 39:91-114.

11.

Roh, Y.S. 1998. ‘‘Built-in Diagnostics for Identifying an Anomaly in Plates Using Wave Scattering,’’ PhD Dissertation, Stanford University, Stanford, USA.

12.

Staszewski, W. , Boller, C. and Tomlinson, G. 2004. Health Monitoring of Aerospace Structures: Smart Sensor Technologies and Signal Processing, Wiley, New York.

13.

Staszewski, W.J. 1998. ‘‘Wavelet Based Compression and Feature Selection for Vibration Analysis,’’ Journal of Sound and Vibration, 211:735-760.

14.

Su, Z. and Ye, L. 2005. ‘‘Lamb Wave Propagation-based Damage Identification for Quasi-isotropic CF/EP Composite Laminates Using Artificial Neural Algorithm: Part I - Methodology and Database Development, ’’ Journal of Intelligent Material Systems and Structures, 16:97-111.

15.

Viktorov, I.A. 1967. Rayleigh and Lamb Waves, Plenum Press , New York.

16.

Wang, C.H. and Chang, F.K. 2005. ‘‘Scattering of Plate Waves by a Cylindrical Inhomogeneity,’’ Journal of Sound and Vibration , 282:429-451.

17.

Wang, C.H. and Rose, L.R.F. 2003. ‘‘Wave Reflection and Transmission in Beams Containing Delamination and Inhomogeneity,’’ Journal of Sound and Vibration, 264:851-872.

18.

Worden, K. 2001. ‘‘Rayleigh and Lamb waves - Basic Principles ,’’ Strain, 37:167-172.