Cable-supported bridges rely on the use of steel cables to support the bridge deck and load on it. Cable tension forces are monitored during construction to assist the alignment of cables and to ensure no cables are overloaded. Given that the cables are critical load carrying elements, it is prudent to routinely monitor the levels of cable tensions during operation. With current measurement methods being costly and labor-intensive, this article proposes an automated and low-cost wireless sensor system for continuous monitoring of the cable tension based on the vibration signature of the cable. A vibration-based tension force estimation method using a peak picking algorithm is explored by embedding it in the computational core of a wireless sensor. Welch’s method to average Fourier spectra from the segments of a long time history signal is employed to remove the non-stationarity of a short-duration acceleration record, which is a limit of the memory-constrained wireless sensor. A series of laboratory tests are conducted on a slender braided steel cable with a variety of cable sags and tension forces. Excellent agreements have been found between the actual tensions and those estimated by the present wireless system.
Ahn, S., Kim, M. and Kim, I.2001. ‘‘Estimation of Stay Cable Tension by Ambient Vibration Measurement in Seohae Cable-stayed Bridge,’’ In: Proceedings of KSCE Annual Conference, Seoul , Korea (in Korean).
2.
Casas, J.R.1994. ‘‘A Combined Method for Measuring Cable Forces: the Cable-stayed Alamillo Bridge, Spain,’’ Structural Engineering International, 4(4):235-240.
3.
Gangone, M.V., Whelan, M.V., Fuchs, M.P. and Janovan, K.D.2007. ‘‘Performance Monitoring of a Short-span Integral-abutment Bridge Using Wireless Sensor Technology,’’ In: Sensor Systems and Networks: Phenomena, Technology, and Applications for NDE and Health Monitoring, Proceedings of SPIE, San Diego, CA.
4.
Hua, X.G., Hua, X.G., Ni, Y.Q., Zhou, H.F. and Ko, J.M.2005. ‘‘Instrumentation for Durability Monitoring of a Long-span Cable-stayed Bridge,’’ In: Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Proceedings of SPIE, San Diego, CA.
5.
IEEE Computer Society.2003. Part 15.4: Wireless Medium Access Control (MAC) and Physical Layer (PHY) Specifications for Low-rate Wireless Personal Area Networks, Institute of Electrical and Electronics Engineers (IEEE), New York.
6.
Irvine, H.M.1981. Cable Structures, The MIT Press , Cambridge, MA.
7.
Kim, B.H. and Park, T.2007. ‘‘Estimation of Cable Tension Force Using the Frequency-based System Identification Method,’’ Journal of Sound and Vibration, 304(3-5):660-676.
8.
Kim, B.H., Park, T., Shin, H. and Yoon, T.Y.2007. ‘‘A Comparative Study of the Tension Estimation Methods for Cable Supported Bridges,’’ International Journal of Steel Structures, 7(1):77-84.
9.
Lynch, J.P., Law, K.H., Kiremidjian, A.S., Carryer, E., Farrar, C.R., Sohn, H., Allen, D.W., Nadler, B. and Wait, J.R.2004a. ‘‘Design and Performance Validation of a Wireless Sensing Unit for Structural Monitoring Applications, ’’ Structural Engineering and Mechanics, 17(3-4):393-408.
10.
Lynch, J.P., Sundararajan, A., Law, K.H., Kiremidjian, A.S. and Carryer, E.2004b. ‘‘Embedding Damage Detection Algorithms in a Wireless Sensing Unit for Attainment of Operational Power Efficiency , ’’ Smart Materials and Structures, 13(4):800-810.
11.
Lynch, J.P. and Loh, K.H.2006. ‘‘A Summary Review of Wireless Sensors and Sensor Networks for Structural Health Monitoring,’’ Shock and Vibration Digest, 38(2):91-128.
12.
Lynch, J.P., Wang, Y., Loh, K.H., Yi, J. and Yun, C.-B.2006. ‘‘Performance Monitoring of the Geumdang Bridge Using a Dense Network of High-resolution Wireless Sensors, ’’ Smart Materials and Structures, 15(6):1561-1575.
Nagayama, T.2007. ‘‘Structural Health Monitoring Using Smart Sensors,’’ Ph.D.Thesis, University of Illinois at Urbana-Champaign, Urbana, IL.
15.
Pakzad, S.N., Fenves, G.L., Kim, S. and Culler, D.E.2008. ‘‘Design and Implementation of Scalable Wireless Sensor Network for Structural Monitoring,’’ Journal of Infrastructure Systems, 14(1):89-101.
16.
Park, S., Lee, J.-J., Yun, C.-B. and Inman, D.J.2008. ‘‘Electromechanical Impedance-based Wireless Structural Health Monitoring Using PCA-Data Compression and k-means Clustering Algorithms,’’ Journal of Intelligent Material Systems and Structures, 19(4):509-520.
17.
Russell, J.C. and Lardner, T.J.1998. ‘‘Experimental Determination of Frequencies and Tension for Elastic Cables,’’ Journal of Engineering Mechanics, 124(10):1067-1072.
18.
Spencer Jr, B.F., Ruiz-Sandoval, M.E. and Kurata, N.2004. ‘‘Smart Sensing Technology: Opportunities and Challenges,’’Journal of Structural Control and Health Monitoring, 11(4):349-368.
19.
Spencer Jr, B.F., Nagayama, T. and Rice, J.A.2005. ‘‘Decentralized Structural Health Monitoring Using Smart Sensors,’’ In: Smart Structures and Materials: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Proceedings of SPIE, San Diego, CA.
20.
Straser, E.G. and Kiremidjian, A.S.1998. ‘‘A Modular, Wireless Damage Monitoring System for Structures,’’John A. Blume Earthquake Engineering Center, Technical Report 128, Stanford, CA .
21.
Wang, D., Liu, J., Zhou, D. and Huang, S.1999. ‘‘Using PVDF Piezoelectric Film Sensors for In Situ Measurement of Stayed-cable Tension of Cable-stayed Bridges,’’Smart Materials and Structures, 8(5):554-559.
22.
Wang, M.L., Wang, G. and Zhao, Y.2005. ‘‘Application of EM Stress Sensors in Large Steel Cables,’’Sensing Issues in Civil Structural Health Monitoring, Springer, The Netherlands.
23.
Wang, Y., Lynch, J.P. and Law, K.H.2007. ‘‘A Wireless Structural Health Monitoring System with Multithreaded Sensing Devices: Design and Validation, ’’ Structure and Infrastructure Engineering, 3(2):103-120.
24.
Welch, P.D.1967. ‘‘The Use of Fast Fourier Transform for the Estimation of Power Spectra: a Method Based on Time Averaging Over Short, Modified Periodograms,’’ IEEE Transactions on Audio and Electroacoustics , 15(2):70-73.
25.
Yanaka, Y. and Kitagawa, M.2002. ‘‘Maintenance of Steel Bridges on Honshu-Shikoku Crossing,’’ Journal of Constructional Steel Research , 58(1):131-150.
26.
Zui, H., Shinke, T. and Namita, Y.1996. ‘‘Practical Formulas for Estimation of Cable Tension by Vibration Method,’’ Journal of Structural Engineering, 122(6):651-656.
27.
Zimmerman, A.T., Shiraishi, M., Swartz, R.A. and Lynch, J.P.2008. ‘‘Automated Modal Parameter Estimation by Parallel Processing within Wireless Monitoring Systems, ’’ Journal of Infrastructure Systems, 14(1):102-113.
28.
Zimmerman, A.T. and Lynch, J.P.‘‘A Parallel Simulated Annealing Architecture for Model Updating in Wireless Sensor Networks,’’IEEE Sensor Journal , (in press).
