Detecting Water Accumulation in Honeycomb Sandwich Structures by Optical-fiber-based Distributed Temperature Measurement

Abstract

Water accumulation in honeycomb sandwich structures is a perceived problem for aircraft operators since it significantly degrades the structural integrity. The authors developed a fiber-optic-based technique to detect water accumulation in large-scale aircraft honeycomb sandwich structures. An optical-fiber network was formed in the adhesive layer and a Brillouin-based sensing system with high spatial resolution (specifically, pre-pump pulse Brillouin optical time domain analysis (PPP-BOTDA)) was utilized to detect the non-uniform internal temperature distribution during cooling in aircraft ascent. First, the temperature change during the ascent was investigated to evaluate the feasibility of the proposed technique. A verification test was then conducted using a Nomex honeycomb sandwich panel. The non-uniform temperature induced by water accumulation was detected from the peak-frequency distributions and the width of the Brillouin gain spectrum, which is the output of the PPP-BOTDA. The spectrum width, which represents the temperature non-uniformity within the spatial resolution of the PPP-BOTDA, could indicate the presence of smaller water accumulations compared to the peak frequency, which represents the temperature averaged over the spatial resolution, thus confirming the importance of evaluating the spectrum width. The developed system is quite useful for continuously monitoring large-scale aircraft sandwich structures.

Keywords

structural health monitoring honeycomb sandwich structure water ingress optical fiber Non-uniform temperature.

Get full access to this article

View all access options for this article.

References

Cotter, D. 1983. ‘‘Stimulated Brillouin Scattering in Monomode Optical Fiber,’’ Journal of Optical Communications , 4(1):10-19.

Culverhouse, D. , Farahi, F. , Pannell, C.N. and Jackson, D.A. 1989. ‘‘Potential of Stimulated Brillouin Scattering as Sensing Mechanism for Distributed Temperature Sensors, ’’ Electronics Letters, 25(14):913-915.

Horiguchi, T. , Shimizu, K. , Kurashima, T. , Tateda, M. and Koyamada, Y. 1995. ‘‘Development of a Distributed Sensing Technique Using Brillouin Scattering,’’ Journal of Lightwave Technology, 13(7):1296-1302.

Kishida, K. and Li, C.H. 2006. ‘‘Pulse Pre-pump-BOTDA Technology for New Generation of Distributed Strain Measuring System,’’ In: J.P, Ou , H, Li and Z.D, Duan (eds), Structural Health Monitoring and Intelligent Infrastructure, pp. 471-477, Taylor & Francis , London.

LaPlante, G. , Marble, A.E. , MacMillan, B. , Lee-Sullivan, P. , Colpitts, B.G. and Balcom, B.J. 2005. ‘‘Detection of Water Ingress in Composite Sandwich Structures: A Magnetic Resonance Approach,’’ NDT & E International, 38(6):501-507.

Minakuchi, S. , Okabe, Y. and Takeda, N. 2007. ‘‘Real-time Detection of Debonding Between Honeycomb Core and Facesheet using a Small-diameter FBG Sensor Embedded in Adhesive Layer,’’ Journal of Sandwich Structures and Materials, 9(1):9-33.

Minakuchi, S. , Mizutani, T. , Tsukamoto, H. , Nishio, M. , Okabe, Y. and Takeda, N. 2008. ‘‘Brillouin Spectral Response Depending on the Strain Non-uniformity within Centimeter Spatial Resolution and its Application to Internal Damage Detection in Large-scale Composite Structures , ’’ Structural Durability & Health Monitoring , 4(4):199-219.

Minakuchi, S. , Okabe, Y. , Mizutani, T. and Takeda, N. 2009. ‘‘Barely Visible Impact Damage Detection for Composite Sandwich Structures by Optical-fiber-based Distributed Strain Measurement,’’ Smart Materials and Structures , 18:085018.

Murayama, H. , Kageyama, K. , Naruse, H. , Shimada, A. and Uzawa, K. 2003. ‘‘Application of Fiber-optic Distributed Sensors to Health Monitoring for Full-scale Composite Structures, ’’ Journal of Intelligent Material Systems and Structures , 14(1):3-13.

10.

Neubrex Co., Ltd. Available online at: http://www.neubrex.jp (Accessed 2009).

11.

Shafizadeh, J.E. , Seferis, J.C. , Chesmar, E.F. and Geyer, R. 1999. ‘‘Evaluation of the In-Service Performance Behavior of Honeycomb Composite Sandwich Structures,’’ Journal of materials engineering and performance, 8(6):661-668.

12.

Shafizadeh, J.E. , Seferis, J.C. , Chesmar, E.F. , Frye, B.A. and Geyer, R. 2003. ‘‘Evaluation of the Mechanisms of Water Migration through Honeycomb Core,’’ Journal of Materials Science, 38(11):2547-2555.

13.

Vinson, J.R. 1999. The Behavior of Sandwich Structures of Isotropic and Composite Materials, Technomic Publishing Company, Lancaster.

14.

Zenkert, D. (ed.) 1997. The Handbook of Sandwich Construction, EMAS Publishing, London.