Zero Poisson’s Ratio Cellular Honeycombs for Flex Skins Undergoing One-Dimensional Morphing

Abstract

Cellular honeycomb cores with overlying flexible face sheets have been proposed for use as flex skins for morphing aircraft. The cellular cores, which provide underlying support to the face sheets for carrying aerodynamic loads, must have low in-plane stiffness and high in-plane strain capability. For one-dimensional morphing applications such as span-, chord-, or camber-change, restraining the Poisson’s contraction (or bulging) that a conventional cellular honeycomb core would otherwise experience in the non-morphing direction results in a substantial increase in the effective modulus in the morphing direction. To overcome this problem, this article develops zero Poisson’s ratio hybrid and accordion cellular honeycombs. Cellular Material Theory is extended, and analytical solutions for the mechanical properties and global strains of the hybrid and accordion cellular honeycombs are developed. The analytical results show excellent agreement with ANSYS finite element results. Comparing the properties shows that the hybrid and accordion honeycombs proposed have generally similar in-plane axial stiffness and strain capabilities to conventional honeycombs when the latter are unrestrained in the non-morphing direction. However, with the zero Poisson’s ratio of the hybrid and accordion honeycombs, it is observed that the axial stiffness in the morphing direction will not increase when the skins are restrained in the non-morphing direction. The zero Poisson’s ratio of the accordion and hybrid cellular honeycombs is not helpful from an out-of-plane load carrying ability standpoint. However, the out-of-plane load carrying ability of the accordion honeycombs can be superior to those of conventional honeycombs if the ‘continuous fibers’ are sufficiently thick, leading to a very large modulus in the non-morphing direction. The effective out-of-plane stiffness of hybrid cellular honeycombs, on the other hand, is poorer than conventional cellular honeycombs.

Keywords

1D morphing flexible skin cellular structure honeycomb accordion.

Get full access to this article

View all access options for this article.

References

Andersen, G.R. , Cowan, D.L. and Piatak, D.J. 2007. ‘‘Aeroelastic Modeling, Analysis and Testing of a Morphing Wing Structure,’’ In: Proceedings of the 48th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, USA.

Bartley-Cho, J.D. , Wang, D.P. , Martin, C.A. , Kudva, J.N. and West, M.N. 2004. ‘‘Development of High-Rate, Adaptive Trailing Edge Control Surface for the Smart Wing Phase 2 Wind Tunnel Model,’’ J. Intell. Mater. Syst. Struct., 15:279-291.

Bein, T. h., Hanselka, H. and Breitbach, E. 2000. ‘‘An Adaptive Spoiler to Control the Transonic Shock,’’ Smart Mater. Struct., 9:141-148.

Bowman, J. , Sanders, B. , Cannon, B. , Kudva, J. , Joshi, S. and Weisshaar, T. 2007. ‘‘Development of Next Generation Aircraft Structures,’’ In: Proceedings of the 48th AIAA/ASME/ASCE/ AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, USA.

Campanile, L.F. , Keimer, R. and Breitbach, E.J. 2004. ‘‘The ‘Fish-Mouth’ Actuator: Design Issues and Test Results,’’ J. Intell. Mater. Syst. Struct., 15:711-719.

Campanile, L.F. and Sachau, D. 2000. ‘‘The Belt-Rib Concept: A Structronic Approach to Variable Camber,’’ J. Intell. Mater. Syst. Struct., 11:215-224.

Gandhi, F. and Anusonti-Inthra, P. 2007. ‘‘Skin Design Studies for Variable Camber Morphing Airfoils,’’ Smart Mater. Struct., 17: 015025.

Gibson, L. and Ashby, M. 1997. Cellular Solids, Structure and Properties, 2nd edn, Cambridge University Press, New York.

Hall, J. 1989. Executive Summary AFTI/F-111 Mission Adaptive Wing, Tech. Rep. WRDC-TR-89-2083 Wright Research Development Center, Wright-Patterson Air Force Base.

10.

Keihl, M.M. , Bortolin, R.S. , Sanders, B. , Joshi, S. and Tidwell, Z. 2005. ‘‘Mechanical Properties of Shape Memory Polymers for Morphing Aircraft Applications,’’ In: Proceedings of SPIE, Smart Structures and Materials 2005: Industrial and Commercial Applications of Smart Structures Technologies, pp. 143-151, San Diego, CA, USA.

11.

Kikuta, M.T. 2003. Mechanical Properties of Candidate Materials for Morphing Wings, Master’s Thesis, Virginia Polytechnic Institute and State University.

12.

Kudva, J. 2004. ‘‘Overview of the DARPA Smart Wing Project,’’ J. Intell. Mater. Syst. Struct., 15:261-267.

13.

Love, M.H. , Zink, P.S. , Stroud, R.L. , Bye, D.R. , Rizk, S. and White, D. 2007. ‘‘Demonstration of Morphing Technology Through Ground and Wind Tunnel Tests,’’ In: Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, Hawaii, USA.

14.

Murray, G. , Gandhi, F. and Bakis, C. 2007. ‘‘Flexible Matrix Composite Skins for One-dimensional Wing Morphing,’’ In: Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii, USA.

15.

Olympio, K.R. and Gandhi, F. 2010. ‘‘Flexible Skins for Morphing Aircraft Using Cellular Honeycomb Cores,’’ J. Intell. Mater. Syst. Struct. (accepted).

16.

Pendleton, E.W. , Bessette, D. , Field, P.B. , Miller, G.D. and Griffin, K.E. 2000. ‘‘Active Aeroelastic Wing Flight Research Program: Technical Program and Model Analytical Development,’’ J. Aircr., 37:554-561.

17.

Perkins, D.A. , Reed, J.L. and Havens, E. 2004. ‘‘Morphing Wing Structures for Loitering Air Vehicles,’’ Proceedings of the 45th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference , Palm Springs, California, USA.

18.

Reddy, J.N. 2007. Theory and Analysis of Elastic Plates and Shells, 2nd edn, Boca Raton. Fla.: CRC; London: Taylor & Francis .

19.

Reed, J.L. , Hemmelgarn, C.D. , Pelley, B.M. and Havens, E. 2005. ‘‘Adaptive Wing Structures,’’ In: Proceedings of SPIE, Smart Structures and Materials 2005: Industrial and Commercial Applications of Smart Structures Technologies, pp. 132-142, San Diego, CA, USA.

20.

Thill, C. , Etches, J.A. , Bond, I.P. , Potter, K.D. and Weaver, P.M. 2007. ‘‘Corrugated Composite Structures for Aircraft Morphing Skin Applications,’’ In: Proceedings of the 18th International Conference of Adaptive Structures and Technologies, Ottawa, Ontario, Canada.

21.

Timoshenko, S.P. and Goodier, J.N. 1970. Theory of Elasticity, 3rd edn, McGraw-Hill, New York.

22.

Yokozeki, T. , Takeda, S.-I. , Ogasawara, T. and Ishikawa, T. 2006. ‘‘Mechanical Properties of Corrugated Composites for Candidate Materials of Flexible Wing Structures,’’ Compos . Part A: Appl. Sci. Manuf., 37(10):1578-1586.