This article proposes a neuro-fuzzy model of superelastic NiTi shape memory alloy (SMA) wires for use in seismic applications. First, in order to collect experimental data, uniaxial tensile tests are conducted on superelastic wires in the temperature range of 0—40°C, and at the loading frequencies of 0.05—2 Hz with five different strain amplitudes. Then, an adaptive neuro-fuzzy inference system (ANFIS) is employed to construct a model of SMAs based on experimental input—output data pairs. The fuzzy model employs strain, strain-rate, and temperature as input variables, and provides stress as single output. Gaussian membership functions (MFs) are assigned to each input variables. A total of 12 if—then rules are used to map these MFs to output characteristic. The model obtained from ANFIS training is validated by using an experimental data set that is not used during training. The developed model is capable of simulating behavior of superelastic SMAs at various temperatures and at various loading rates while it remains simple enough to realize numerical simulations. These features of the model make it attractive for numerical studies on vibration control of structures.
Andrawes, B. and DesRoches, R.2005. ‘‘Unseating Prevention for Multiple Frame Bridges Using Superelastic Devices,’’ Smart Materials and Structures, 14:60-67.
2.
Auricchio, F.2001. ‘‘A Robust Integration-algorithm for a Finite-strain Shape Memory Alloy Superelastic Model,’’ International Journal of Plasticity, 17:971-990.
3.
Auricchio, F. and Lubliner, J.1997. ‘‘A Uniaxial Model for Shape-memory Alloys ,’’ International Journal of Solids and Structures , 34:3601-3618.
4.
Azadi, B., Rajapakse, R.K.N.D. and Maijer, D.M.2006. ‘‘One-dimensional Thermomechanical Model for Dynamic Pseudoelastic Response of Shape Memory Alloys,’’Smart Materials and Structures, 15:996-1008.
5.
Boyd, J.G. and Lagoudas, D.C.1996. ‘‘Thermodynamical Constitutive Model for Shape Memory Materials. Part I. The Monolithic Shape Memory Alloy, ’’ International Journal of Plasticity, 12: 805-842.
6.
Brinson, L.C.1993. ‘‘One-dimensional Constitutive Behavior of Shape Memory Alloys: Thermomechanical Derivation with Non-constant Material Functions and Redefined Martensite Internal Variable,’’ Journal of Intelligent Material Systems and Structures, 4:229-241.
7.
Brinson, L.C., Schmidt, I. and Lammering, R.2004. ‘‘Stress-induced Transformation Behavior of a Polycrystalline NiTi Shape Memory Alloy: Micro and Macromechanical Investigations via In Situ Optical Microscopy,’’Journal of the Mechanics and Physics of Solids, 52:1549-1571.
8.
Buragohain, M. and Mahanta, C.2008. ‘‘A Novel Approach for ANFIS Modelling based on Full Factorial Design,’’ Applied Soft Computing , 8:609-625.
9.
Chen, W. and Song, B.2006. ‘‘Temperature Dependence of a NiTi Shape Memory Alloy’s Superelastic Behavior at a High Strain Rate, ’’ Journal of Mechanics of Materials and Structures, 1:339-356.
10.
Choi, E., Nam, T.H. and Cho, B.S.2007. ‘‘A New Concept of Isolation Bearings for Highway Steel Bridges Using Shape Memory Alloys,’’ Canadian Journal of Civil Engineering, 32:957-967.
11.
Churchill, C.B., Shaw, J.A. and Iadicola, M.A.2009. ‘‘Tips and Tricks for Characterizing Shape Memory Alloy Wire: Part 2-Fundamental Isothermal Responses,’’Experimental Techniques, 33:51-62.
12.
DesRoches, R., McCormick, C. and Delemont, M.2004. ‘‘Cyclic Properties of Superelastic Shape Memory Alloy Wires and Bars,’’ Journal of Structural Engineering, 130: 38-46.
13.
Dolce, M. and Cardone, D.2001. ‘‘Mechanical Behavior of Shape Memory Alloys for Seismic Applications 2. Austenite NiTi Wires Subjected to Tension, ’’ International Journal of Mechanical Sciences, 43:2657-2677.
14.
Dolce, M., Cardone, D. and Marnetto, R.2000. ‘‘Implementation and Testing of Passive Control Devices Based on Shape Memory Alloys,’’ Earthquake Engineering and Structural Dynamics, 29:945-968.
15.
Duerig, T.W. and Pelton, A.R.1994. ‘‘Ti-Ni Shape Memory Alloys,’’ In: Boyer, R.,Collings, E.W. and Welsch, G. (eds), Materials Properties Handbook Titanium Alloys, pp. 1035-1048, ASM International, Ohio.
16.
Hurlebaus, S. and Gaul, L.2006. ‘‘Smart Structure Dynamics,’’Mechanical Systems and Signal Processing, 20:255-281.
17.
Jang, J.S.R.1993. ‘‘ANFIS: Adaptive-network-based Fuzzy Inference System,’’ IEEE Transactions on Systems, Man, and Cybernetics, 23:665-685.
18.
Jang, J.S.R.1996. ‘‘Input Selection for ANFIS Learning,’’Proceedings of the IEEE International Conference on Fuzzy Systems, 2:1493-1499.
19.
Jang, J.S.R., Sun, C. and Mizutani, E.1997. Neuro-fuzzy and Soft Computing: A Computational Approach to Learning and Machine Intelligence, Prentice Hall, Upper Saddle River, NJ.
20.
Johnson, R., Padgett, J.E., Maragakis, M.E., DesRoches, R. and Saiidi, M.S.2008. ‘‘Large Scale Testing of Nitinol Shape Memory Alloy Devices for Retrofitting of Bridges,’’ Smart Materials and Structures, 17:1-10.
21.
Leo, P.H., Shield, T.W. and Bruno, O.P.1993. ‘‘Transient Heat Transfer Effects on the Pseudoelastic Behavior of Shape-memory Wires,’’ Acta Metallurgica Materialia, 41:2477-2485.
22.
Levitas, V.I., Idesman, A.V., Stein, E., Spielfeld, J. and Hornbogen, E.1998. ‘‘A Simple Micromechanical Model for Pseudoelastic Behavior of CuZnAl Alloy,’’ Journal of Intelligent Material Systems and Structures, 5:324-334.
23.
Liang, C. and Rogers, C.A.1990. ‘‘One-dimensional Thermo Mechanical Constitutive Relations for Shape Memory Material,’’ Journal of Intelligent Material Systems and Structures, 1:207-234.
24.
Motahari, S.A. and Ghassemieh, M.2007. ‘‘Multilinear One-dimensional Shape Memory Material Model for Use in Structural Engineering Applications, ’’ Engineering Structures, 29: 904-913.
25.
Muller, I. and Seelecke, S.2001. ‘‘Thermodynamic Aspects of Shape Memory Alloys ,’’ Mathematical and Computer Modelling, 34:1307-1355.
26.
Nguyen, H.T., Nadipuram, R.P., Walker, C.L. and Walker, E.A.2003. A First Course in Fuzzy and Neural Control, Chaoman & Hall/CRC, Boca Raton, FL.
27.
Ozbulut, O.E. and Hurlebaus, S.2009. ‘‘Evaluation of the Performance of a Sliding-type Base Isolation System with a NiTi Shape Memory Alloy Device Considering Temperature Effects,’’Engineering Structures, 32:238-249.
28.
Ozbulut, O.E. and Roschke, P.2008. ‘‘Optimization of Multiple Shape Memory Alloy Devices by a Genetic Algorithm for Seismic Response of a Tall Structure,’’ In: Proceedings of the 18th Analysis and Computation Specialty Conference (A&C), April, Vancouver, BC, Canada.
29.
Padgett, J.E. and DesRoches, R.2008. ‘‘Seismic Performance of a Passive Control Technology for Bridges using Shape Memory Alloys,’’ In: Proceedings of the 18th Analysis and Computation Specialty Conference (A&C), April, Vancouver, BC, Canada.
30.
Patoor, E., Eberhardt, A. and Berveiller, M.1998. ‘‘Micromechanical Modeling of Shape Memory Alloys Behavior,’’ Archives of Mechanics, 40:775-794.
31.
Piedboeuf, M.C., Gauvin, R. and Thomas, M.1998. ‘‘Damping Behavior of Shape Memory Alloys: Strain Amplitude, Frequency, and Temperature Effects,’’Journal of Sound and Vibration, 214:885-901.
32.
Salich, J., Hou, Z. and Noori, M.2001. ‘‘Vibration Suppression of Structures Using Passive Shape Memory Alloy Energy Dissipation Devices,’’ Journal of Intelligent Material Systems and Structures, 12:671-680.
33.
Schmidt, I. and Lammering, R.2004. ‘‘The Damping Behaviour of Superelastic NiTi Components,’’ Materials Science and Engineering A, 378:70-75.
34.
Shook, D.A., Roschke, P.N. and Ozbulut, O.E.2008. ‘‘Superelastic Semi-active Damping of a Base-isolated Structure,’’ Structural Control and Health Monitoring , 15:746-768.
35.
Takagi, T. and Sugeno, M.1983. ‘‘Derivation of Fuzzy Control Rules from Human Operator’s Control Actions,’’ In: Proceedings of the IFAC Symposium on Fuzzy Information, Knowledge Representation and Decision Analysis, July, Marseille, France, pp. 55-60.
36.
Tobushi, H., Shimeno, Y., Hachisuka, T. and Tanaka, K.1998. ‘‘Influence of Strain Rate on Superelastic Properties of TiNi Shape Memory Alloy,’’ Mechanics of Materials, 30:141-150.
37.
Torra, V., Isalgue, A., Martorell, F., Terriault, P. and Lovey, F.C.2007. ‘‘Built in Dampers for Family Homes via SMA: An ANSYS Computation Scheme Based on Mesoscopic and Microscopic Experimental Analyses,’’ Engineering Structures, 29:1889-1902.
38.
Wilde, K., Gardoni, P. and Fujino, Y.2000. ‘‘Base Isolation System with Shape Memory Alloy Device for Elevated Highway Bridges,’’ Engineering Structures, 22:222-229.
39.
Wolons, D., Gandhi, F. and Malovrah, B.1998. ‘‘Experimental Investigation of the Pseudoelastic Hysteresis Damping Characteristics of Shape Memory Alloy Wires, ’’ Journal of Intelligent Material Systems and Structures, 9:116-126.
40.
Wu, K., Yang, F., Pu, Z. and Shi, J.1996. ‘‘The Effect of Strain Rate on Detwinning and Superelastic Behavior of NiTi Shape Memory Alloys,’’ Journal of Intelligent Material Systems and Structures, 7:138-144.
41.
Zhang, Y. and Zhu, S.2007. ‘‘A Shape Memory Alloy-based Reusable Hysteretic Damper for Seismic Hazard Mitigation,’’ Smart Materials and Structures, 16:1603-1613.
