Piezoelectric Micro-power Generation to Charge Supercapacitor with Optimized Duty Cycle

Abstract

Energy harvesting has been proved to be a novel solution to replace the batteries in remote power supply applications. Unfortunately, the limited capacity and low efficiency of output power constraint the practical applications of energy harvesting in daily life. After a systematic review of previous researches about energy harvesting in power management perspective, a circuit design, which focuses on low-frequency mechanical vibration, is introduced. With classical piezoelectric cantilever configuration, the maximum charging current of a supercapacitor can be obtained by optimizing the duty cycle of a buck regulator through software implemented pulse width modulation. The results of experiments prove the capacitive electric model of the piezo, the existence of maximum charging current of the supercapacitor, and the adaptive control of the designed circuits. With the duty cycle optimized to 2.17%, the maximum charging current of 17.36 mA is measured, which is approximately four times fold of previous researches in similar vibration conditions. An active RFID application is proposed to utilize the harvested power of 67.2 µW.

Keywords

piezoelectric devices energy storage DC-DC power convertors capacitors pulse width modulation.

Get full access to this article

View all access options for this article.

References

Cerovsky, Z. and Mindl, P. 2005. ‘‘Regenerative Braking by Electric Hybrid Vehicles Using Supercapacitor and Power Splitting Generator,’’ In: Proceedings of European Conference on Power Electronics and Applications, Dresden, Germany.

Gualous, H. , Louahlia-Gualous, H. , Gallay, R. and Miraoui, A. 2007. ‘‘Supercapacitor Thermal Characterization in Transient State,’’ In: Proceedings of 42nd IAS Annual Meeting on Industry Applications, New Orleans, LA, USA, pp. 722-729.

Hofmann, H.F. , Ottman, G.K. and Lesieutre, G.A. 2003. ‘‘Optimized Pieoelectric Energy Harvesting Circuit Using Step-down Converter in Discontinuous Conduction Mode,’’ IEEE Trans. Power Electron., 18:696-703.

Karthaus, U. and Fischer, M. 2003. ‘‘Full Integrated Passive UHF RFID Transponder IC with 16.7-μW Minimum RF Input Power,’’ IEEE J. Solid-State Circuits, 38:1602-1608.

Kasyap, A. , Johnson, D. , Horowitz, S. , Nishida, T. , Ngo, K. , Sheplak, M. and Cattafesta, L. 2002. ‘‘Energy Reclamation from a Vibrating Piezoelectric Composite Beam,’’ In: Proceedings of 9th International Congress on Sound and Vibration, Orlando , USA, Vol. 271.

Le, T.T. , Han, J. , Jouanne, A.V. , Mayaram, K. and Fiez, T.S. 2006. ‘‘Piezoelectric Micro-power Generation Interface Circuits,’’ IEEE J. Solid-State Circuits, 41:1411-1420.

Maxwell. 2005. Charging of Ultracapacitors, Datasheet, Maxwell Technologies, Inc., San Diego, CA.

Maxwell. 2009. BOOSTCAP® Ultracapacitors Information Sheet, Available at: http://www.maxwell.com (accessed date January, 2009 ).

Ottman, G.K. , Hofmann, H.F. , Bhatt, A.C. and Lesieutre, G.A. 2002. ‘‘Adaptive Piezoelectric Energy Harvesting Circuit for Wireless Remote Power Supply,’’ IEEE Trans. Power Electron., 17:669-676.

10.

Ramadass, Y.K. and Chandrakasan, A.P. 2009. ‘‘An Efficient Piezoelectric Energy-harvesting Interface Circuit Using a Bias-flip Rectifier and Shared Inductor,’’ In: IEEE International Solid-State Circuits Conference , San Francisco, USA, pp. 296-297.

11.

Rashid, M.H. 2003. Power Electronics: Circuits, Devices and Applications , 3rd edn, Prentice Hall, Englewood Cliffs, NJ.

12.

Simjee, F.I. and Chou, P.H. 2006. ‘‘Everlast: Long-life Supercapacitor-operated Wireless Sensor Node,’’ In: Proceedings of International Symposium on Low Power Electronics and Design, Tegernsee, Bavaria, Germany.

13.

Simjee, F.I. and Chou, P.H. 2008. ‘‘Efficient Charging of Supercapacitors for Extended Lifetime of Wireless Sensor Nodes,’’ IEEE Trans. Power Electron., 23:1526-1536.

14.

Sodano, H.A. , Inman, D.J. and Park, G. 2004. ‘‘A Review of Power Harvesting from Vibration Using Piezoelectric Materials,’’ The Shock and Vibration Digest, 36:197-205.

15.

Sodano, H.A. , Park, G. , Leo, D.J. and Inman, D.J. 2003a. ‘‘Use of Piezoelectric Energy Harvesting Devices for Charging Batteries,’’ In: Proceedings of SPIE 10th Annual International Symposium on Smart Structures and Materials, San Diego, CA, USA, Vol. 5050.

16.

Sodano, H.A. , Park, G. , Leo, D.J. and Inman, D.J. 2003b. ‘‘Model of Piezoelectric Power Harvesting Beam,’’ In: Proceeding of ASME International Mechanical Engineering Congress and Exposition, Washington, D.C., USA, Vol. 40.

17.

Tan, Y.K. , Lee, J.Y. and Panda, S.K. 2008. ‘‘Maximize Piezoelectric Energy Harvesting Using Synchronous Charge Extraction Technique for Powering Autonomous Wireless Transmitter,’’ In: IEEE International Conference Sustainable Energy Technologies, Singapore, pp. 1123-1128.

18.

Umeda, M. , Nakamura, K. and Ueha, S. 1997. ‘‘Energy Storage Characteristics of a Piezo-generator Using Impact Induced Vibration,’’ Jap. J. Appl. Phys., 36:3146-3151.