Fabrication and Thermo-Mechanical Characterization of a Shape Memory Alloy Hybrid Composite

Abstract

Shape memory alloy (SMA) elements embedded in a structure allow to control the structural properties, thanks to their coupled thermo-mechanical behavior. In this study, the manufacturing and the shape control abilities of glass fiber/polyester resin SMA hybrid composites (SMAHCs) were experimentally investigated. Mechanical and calorimetric characterizations of SMA were carried out and correlated to the thermo-mechanical behavior of the SMAHC. The SMAHC was manufactured by the Vacuum Infusion Process that uses dry fibers and liquid matrix for the composite production. A polyester resin having a curing temperature lower than the SMA Austenite transition temperature was chosen as matrix, so a blocking system for the SMA wires was not needed during the cure. The thermo-mechanical behavior of the SMAHC was investigated by monitoring the shape change of the plate during heating of the embedded wires. The results give some indications on the appropriate characterization and choice of materials for SMAHC manufacturing.

Keywords

shape memory alloys hybrid composites smart materials thermo-mechanical properties.

Get full access to this article

View all access options for this article.

References

Airoldi, G. , Riva, G. , Rivolta, B. and Vanelli, M. 1994. ‘‘DSC Calibration in the Study of Shape Memory Alloys,’’ Journal of Thermal Analysis and Calorimetry , 42:781-791.

Antonucci, V. , Faiella, G. , Giordano, M. , Mennella, F. and Nicolais, L. 2007. ‘‘Electrical Resistivity Study and Characterization During NiTi Phase Transitions,’’ Thermochimica Acta, 462:64-69.

Baz, A. and Chen, T. 1993. ‘‘Performance of Nitinol-Reinforced Drive Shafts,’’ In: Smart Structures and Materials 1993: Smart Structures and Intelligent Systems, 2 February, Albuquerque, NM, USA, SPIE Vol. 1917.

Baz, A. , Poh, S. , Ro, J. , Mutua, M. and Gilheany, J. 1992. ‘‘Active Control of Nitinol-Reinforced Composite Beam,’’ In: Tzou, H.S. and Anderson, G. (eds), Intelligent Structural Systems, Kluwer Academic Publishers, The Netherlands.

Birman, V. 1997. ‘‘Theory and Comparison of the Effect of Composite and Shape Memory Alloy Stiffeners on Stability of Composite Shells and Plates ,’’ International Journal of Mechanical Science , 39:1139-1149.

Chandra, R. 2001. ‘‘Active Shape Control of Composite Blades Using Shape Memory Actuation,’’ Smart Materials and Structures, 10:1018-1024.

Daghia, F. , Faiella, G. , Antonucci, V. and Giordano, M. 2008a. ‘‘Thermomechanical Modelling and Experimental Testing of a Shape Memory Alloy Hybrid Composite Plate,’’ Advances in Science and Technology, 59:41-46.

Daghia, F. , Inman, D.J. , Ubertini, F. and Viola, E. 2008b. ‘‘Shape Memory Alloy Hybrid Composite Plates for Shape and Stiffness Control,’’ Journal of Intelligent Material Systems and Structures, 19:609-619.

Daghia, F. 2008. ‘‘Active Fibre-Reinforced Composites with Embedded Shape Memory Alloys,’’ PhD Thesis, DISTART Department , University of Bologna.

10.

Faiella, G. , Antonucci, V. , Giordano, M. , Daghia, F. and Viola, E. 2008. ‘‘Effect of the Loading History on Shape Memory Alloy Transformation Temperatures,’’ Advances in Science and Technology, 59:57-62.

11.

Khalili, S.M.R. , Shokuhfar, A. , Malekzadeh, K. and Ashenai Ghasemi, F. 2007. ‘‘Low-Velocity Impact of Active Thin-Walled Hybrid Composite Structures Embedded with SMA Wires,’’ Thin-Walled Structures, 45:799-808.

12.

Lin, Z.C. , Fung, P.C.W. , Zhang, J.X. and Liang, K.F. 1990. ‘‘A New Phase Transition Phenomenon in NiTi Alloy,’’ Solid State Communications, 75:389-393.

13.

Ostachowicz, W. , Krawczuk, M. and Zak, A.J. 2000. ‘‘Dynamics and Buckling of a Multilayer Composite Plate with Embedded SMA Wires,’’ Composite Structures , 48:163-167.

14.

Ro, J. and Baz, A. 1995a. ‘‘Nitinol-Reinforced Plates: Part I. Thermal Characteristics,’’ Composites Engineering, 5:61-75.

15.

Ro, J. and Baz, A. 1995b. ‘‘Nitinol-Reinforced Plates: Part II. Static and Buckling Characteristics,’’ Composites Engineering , 5:77-90.

16.

Ro, J. and Baz, A. 1995c. ‘‘Nitinol-Reinforced Plates: Part III. Dynamic Characteristics,’’ Composites Engineering, 5:91-106.

17.

Turner, T.L. , Buehrle, R.D. , Cano, R.J. and Fleming, G.A. 2006. ‘‘Modeling, Fabrication, and Testing of a SMA Hybrid Composite Jet Engine Chevron Concept,’’ Journal of Intelligent Material Systems and Structures, 17:483-497.

18.

Uchil, J. , Mahesh, K.K. and Ganesh Kumara, K. 2002. ‘‘Electrical Resistivity and Strain Recovery Studies on the Effect of Thermal Cycling Under Constant Stress on R-Phase in NiTi Shape Memory Alloy,’’ Physica B: Condensed Matter, 324:419-428.

19.

Wei, Z.G. , Sandström, R. and Miyazaki, S. 1998. ‘‘Shape Memory Materials and Hybrid Composites for Smart Systems: Part II Shape-Memory Hybrid Composites, ’’ Journal of Materials Science, 33:3763-3783.

20.

Xu, Y. , Otsuka, K. , Toyama, N. , Yoshida, H. , Nagai, H. and Kishi, T. 2004. ‘‘A Novel Technique for Fabricating SMA/CFRP Adaptive Composites Using Ultrathin TiNi wires,’’ Smart Materials and Structures, 13:196-202.

21.

Zhou, G. and Lloyd, P.

2009. ‘‘Design, Manufacture and Evaluation of Bending Behaviour of Composite Beams with SMA Wires

,’’ Composites Science and Technology, 69:2034-2041.