Piezoelectric Fiber Composite Strip Transducer Design Considerations for Generating Lamb Waves

Abstract

Lamb waves have great promise among the various active monitoring schemes being researched for Structural Health Monitoring. Planar Lamb wave excitation using surface-bonded piezoelectric strips to function as comb transducers is investigated numerically for both the fundamental symmetric S0 and the antisymmetric A0 wave modes. This comb-type transducer is comprised of multiple piezoelectric elements, which are piezoelectric fiber composites sandwiched between electrodes. These transducer strips reduce the wiring requirements, can conform to curved surfaces, and the properties can be tailored to suit the application. Transducer variables are many; here fiber orientation, volume fraction, poling directions, and electrode locations are investigated. Specifically, piezocomposite properties are estimated through micromechanical modeling for input to finite element analysis of Lamb wave generation and propagation. For this multiphysics problem, the finite element analysis employs co-simulation using ABAQUS Standard and ABAQUS Explicit to simulate transient wave propagation from a strip transducer on a plate. In the finite element results, the amplitude of the Lamb wave at a prescribed distance from the transducer is evaluated to characterize the effectiveness of the composite comb transducer. Furthermore, results show that there are a number of cases where composite actuators provide a large amplitude response. After considering piezoelectric fiber direction, poling direction, and electric field direction, it appears that fiber, polarization, and activation electric fields through the thickness of the transducer represent the optimal design.

Keywords

structural health monitoring ultrasonic guided waves piezoelectric fiber composites micromechanics finite element analysis.

Get full access to this article

View all access options for this article.

References

Aboudi, J. 1998. ‘‘Micromechanical Prediction of the Effective Coefficients of Thermoelectric Multiphase Composites, ’’ Journal of Intelligent Material Systems and Structures, 9:713-722.

Birchmeier, M. , Gsell, D. , Juon, M. , Brunner, A.J. , Paradies, R. and Dual, J. 2009. ‘‘Active Fiber Composites for the Generation of Lamb Waves,’’ Ultrasonics, 49:73-82.

Chimenti, D.E. 1997. ‘‘Guided Waves in Plates and Their Use in Materials Characterization,’’ Applied Mechanics Reviews, 50:247-284.

Cho, H. , Lissenden, C.J. 2011. ‘‘Monitoring Fatigue Cracks in Aluminium Joints with Ultrasonic Guided Waves,’’ In: Review of Progress in Quantitative Nondestructive Evaluation, Thompson, D.O. and Chimenti, D.E. (Eds), American Institute of Physics Proc. 1335 , 30:145-152.

Deraemaeker, A. , Nasser, H. , Benjeddou, A. and Preumont, A. 2009. ‘‘Mixing Rules for the Piezoelectric Properties of Macro Fiber Composites,’’ Journal of Intelligent Material Systems and Structures, 20:1475-1482.

Giurgiutiu, V. 2008. Structural Health Monitoring with Piezoelectric Wafer Active Sensors, Academic Press, Burlington, MA.

Giurgiutiu, V. , Zagrai, A. and Bao, J. 2004. ‘‘Damage Identification in Aging Aircraft Structures with Piezoelectric Wafer Active Sensors,’’ Journal of Intelligent Material Systems and Structures, 15:673-687.

Guennam, A.E. and Luccioni, B.M. 2006. ‘‘FE Modeling of a Closed Box Beam with Piezoelectric Fiber Composite Patches,’’ Smart Materials and Structures, 15:1605-1615.

Ihn, J.B. and Chang, F.K. 2004. ‘‘Detection and Monitoring of Hidden Fatigue Crack Growth Using a Built-In Piezoelectric Sensor/Actuator Network: I. diagnostics,’’ Smart Materials and Structures , 13:609-620.

10.

Keilers, C.H. and Chang, F.K. 1995. ‘‘Identifying Delaminations in Composite Beams Using Built-In Piezoelectrics: Part 1- Experiments and Analysis,’’ Journal of Intelligent Material Systems and Structures , 6:649-663.

11.

Kumar, A. and Chakraborty, D. 2009. ‘‘Effective Properties of Thermo-Electro-Mechanically Coupled Piezoelectric Fiber Reinforced Composites,’’ Materials and Design, 30:1216-1222.

12.

Lamb, H. 1917. ‘‘Waves in an Elastic Plate,’’ Proceedings of the Royal Society, A93:114-128.

13.

Li, J. and Rose, J.L. 2001. ‘‘Implementing Guided Wave Mode Control by Use of a Phased Transducer Array,’’ IEEE Transactions on Ultrasonics, Ferroelectrics & Frequency Control, 48:761-768.

14.

Li, S. and Lissenden, C.J. 2010. ‘‘Modeling Ultrasonic Guided Waves from Piezoelectric Fiber Composite Strip Actuators, Proceedings of the ASME 2010 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, paper SMASIS2010-3771, 9 pages.

15.

Lissenden, C.J. , Blackshire, J.L. and Puthillath, P.K. 2009. ‘‘Structural Health Monitoring of Composite Laminates with Embedded Piezoelectric Fibers,’’ In: Thompson, D.O. and Chimenti, D.E. (eds), Review of Progress in Quantitative Nondestructive Evaluation, Vol. 28, pp. 974-981, American Institute of Physics.

16.

Lissenden, C.J. , Li, S. and Rose, J.L. 2010. ‘‘Continuous Piezoelectric Health Monitoring Systems Based on Ultrasonic Guided Waves,’’ In: Tomizuka, M. (ed.), Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Proceedings of SPIE, Vol. 7647, paper 747-77, 12 pages.

17.

Lu, Y. , Ye, L. , Su, Z. and Yang, C. 2008. ‘‘Quantitative Assessment of Through-Thickness Crack Size Based on Lamb Wave Scattering in Aluminium Plates, ’’ NDT&E International, 41:59-68.

18.

Puthillath, P.K. , Kannajosyula, H. , Lissenden, C.J. and Rose, J.L. 2009. ‘‘Ultrasonic Guided Wave Inspection of Adhesive Joints: A Parametric Study for a Step-Lap Joint,’’ Review of Progress in Quantitative Nondestructive Evaluation 28, American Institute of Physics , pp. 1127-1133.

19.

Raghavan, A. and Cesnik, C.E.S. 2007. ‘‘3-D Elasticity-Based Modeling of Anisotropic Piezocomposite Transducers for Guided Wave Structural Health Monitoring , ’’ Journal of Vibration and Acoustics, 129:739-751.

20.

Ray, M.C. 2006. ‘‘Micromechanics of Piezoelectric Composites with Improved Effective Piezoelectric Constant,’’ International Journal Mechanics and Materials in Design, 3:361-371.

21.

Ray, M.C. and Pradhan, A.K. 2007. ‘‘On the Use of Vertically Reinforced 1-3 Piezoelectric Composites for Hybrid Damping of Laminated Composite Plates ,’’ Mechanics of Advanced Materials and Structures , 14:245-261.

22.

Rose, J.L. 1999. Ultrasonic Waves in Solid Media, Cambridge University Press, Cambridge, UK.

23.

Rose, J.L. , Pelts, S.P. and Quarry, M.J. 1998. ‘‘A Comb Transducer Model for Guided Wave NDE,’’ Ultrasonics, 36:163-169.

24.

Yu, L. , Santoni-Bottai, G. , Xu, B. , Liu, W. and Giurgiutiu, V. 2009. ‘‘Piezoelectric Wafer Active Sensors for In Situ Ultrasonic-Guided Wave SHM,’’ Fatigue & Fracture of Engineering Materials & Structures, 31:611-628.

25.

Zhao, X. , Gao, H. , Zhang, G. , Ayhan, B. , Yan, F. , Kwan, C. and Rose, J.L. 2007. ‘‘Active Health Monitoring of an Aircraft Wing with Embedded Piezoelectric Sensor/Actuator Network I. Defect Detection, Localization and Growth Monitoring,’’ Smart Materials and Structures, 16:1208-1217.