Numerical simulation of hybrid composite shape-memory alloy wire-embedded structures

The large recovery force and non-linear deformation behaviour resulting from a change in the temperature in shape-memory alloys (SMAs) make them attractive materials for applications in smart materials and structures, as well as actuators. However, SMAs are limited in their application because they cannot support general loads such as bending or compression. SMA wire-embedded composite materials, where materials such as glass fibre reinforced plastics (GFRPs) are combined with SMAs, are proposed to overcome these limitations. However, the increased stiffness of GFRPs limits the deformation that can be achieved. The inclusion of more compliant materials, such as silicon rubber, into the matrix can improve the achievable deformation, and the characteristics of the resulting hybrid composite can be controlled by varying the conformation of the material. In this study, a numerical simulation method was developed to predict the deformation behaviour of SMA wire-embedded hybrid composites. To verify the simulation procedure, several conformations of SMA wire-embedded hybrid composites were fabricated, and their deformation behaviours were compared with the simulation results. The simulation was then used to achieve a favourable trade-off between the stiffness and the achievable deformation of the structure.