Fusion welding of nickel–titanium and 304 stainless steel tubes: Part I: laser welding

Abstract

Due to their large blocking stresses, high recovery strains, and solid-state operation, nickel–titanium actuators can offer substantial weight and space savings relative to traditional electric or hydraulic systems. A challenge surrounding NiTi-based actuators is integration of the NiTi components into a given system; this alloy is difficult and expensive to machine and challenging to weld to itself and structural materials. In this research, we join NiTi and 304 stainless steel tubes of 9.53 mm (0.375 in) in diameter through laser welding to create joints with weld depths up to 1.65 mm (0.065 in). By joining NiTi to a common structural material that is easily machined and readily welded to other materials, system integration is greatly improved. The joints prepared in this study were characterized through optical microscopy, hardness mapping, energy dispersive X-ray spectroscopy, mechanical testing, and analysis of the resulting fracture surfaces. The average ultimate shear strength of these joints is 429 MPa (62.2 10³ lbf/in²) and the resulting fusion zone has a maximum width of 21.9 μm with a maximum hardness of 929 HV, while a possible heat-affected zone in NiTi is limited between 1 and 2 μm over most of the weld.

Keywords

Shape memory manufacturing system integration NiTi welding shape memory alloys

Get full access to this article

View all access options for this article.

References

AK Steel Corporation (2007) 304/304L stainless steel. Available at: http://www.aksteel.com

Alapati

Brantley

Nusstein

. (2006) Vickers hardness investigation of work-hardening in used NiTi rotary instruments. Journal of Endodontics 32: 1191–1193.

Becker

(2002) ASM Handbook: Volume 11—Failure Analysis and Prevention. Materials Park, OH: ASM International.

Bormann

(1992) Ni–Ti phase diagram. Available at: http://www.asminternational.org

Cieslak

(1993) Cracking Phenomena Associated with Welding. ASM Handbook: Volume 6—Welding, Brazing, and Soldering. Materials Park, OH: ASM International, pp. 88–96.

Falvo

Furgiuele

Maletta

(2005) Laser welding of a NiTi alloy: mechanical and shape memory behaviour. Materials Science and Engineering A—Structural Materials Properties Microstructure and Processing 412: 235–240.

Gugel

Schuermann

Theisen

(2006) Laser welding of NiTi wires. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 481: 668–671.

Hahnlen

Fox

Dapino

(2012) Ultrasonic soldering of shape memory NiTi to aluminum 2024. Welding Journal 91(1): 1s–7s.

Hall

(1999) Joining and Welding Nitinol. Columbus, OH: Edison Welding Institute.

10.

Hall

(2005) Method of welding titanium and titanium based alloys to ferrous metals. US Patent No. 6875949.

11.

Hall

(1993) Joint, a laminate, and a method of preparing a nickel-titanium alloy member surface for bonding to another layer of metal. US Patent No. 5242759.

12.

Hartl

Mooney

Lagoudas

. (2008) Experimentally validated numerical analysis of aerostructures incorporating shape memory alloys. In: Dapino

Zoubeida

(eds) Proceedings of SPIE, vol. 6929, San Diego, CA, 9–13 March 2008, pp. 692913-1–692913-11. (doi:10.1117/12.776356)

13.

Hobart Institute of Welding Technology (2009) Welding Guide. Troy, OH: Hobart Institute of Welding Technology.

14.

Johnson Matthey (2011) Nitinol technical specifications: transformation, physical, electrical, magnetic and mechanical. Available at: http://jmmedical.com

15.

Kahn

Panda

Zhou

(2008) Effects of welding parameters on the mechanical performance of laser welded nitinol. Materials Transactions 49(11): 2702–2708.

16.

Kou

(2003) Welding Metallurgy. Hoboken, NJ: John Wiley & Sons, Inc.

17.

Rong

. (2000) Fabrication of cellular Ni-Ti intermetallic compounds. Journal of Materials Research 15(1): 10–13.

18.

Mabe

Ruggeri

Rosenzweig

. (2004) Nitinol performance characterization and rotary actuator design. In: Proceedings of SPIE (ed Anderson

), vol. 5388, San Diego, CA, 15–18 March 2004, pp. 95–109. (doi:10.1117/12.539008)

19.

McGuire

(2008) Stainless Steels for Design Engineers. Materials Park, OH: ASM International.

20.

Mankins

Lamb

(1990) ASM Handbook: Volume 2—Properties and Selection: Nonferrous Alloys and Special-Purpose Materials. Materials Park, OH: ASM International.

21.

Mills

Davis

(1987) ASM Handbook: Volume 12—Fractography. Materials Park, OH: ASM International.

22.

Nitinol Devices & Components (2009) Material data sheet: nitinol SM495 wire. Available at: http://www.nitinol.com

23.

Saburi

Nenno

Fukuda

(1986) Crystal structure and morphology of metastable X phase in shape memory Ti–Ni alloys. Journal of the Less-Common Metals 125: 157–166.

24.

Tam

Khan

Zhou

(2011) Mechanical and functional properties of laser-welded Ti-55.8 Wt Pct Ni nitinol wires. Metallurgical and Materials Transaction A: Physical Metallurgy and Materials Science 42: 2166–2175.

25.

Tillack

(1993) Selection of Nickel, Nickel-Copper, Nickel-Chromium, and Nickel-Chromium-Iron Alloys. ASM Handbook: Volume 6—Welding, Brazing, and Soldering. Materials Park, OH: ASM International, pp. 586–592.

26.

US National Institutes of Health (2009) ImageJ. Available at: http://rsbweb.nih.gov/ij

27.

Van der Eijk

Fostervoll

Sallom

. (2003) Plasma welding of NiTi to NiTi, stainless steel and Hastelloy C276. In: Proceedings of ASM materials solutions, Pittsburgh, PA, 13–15 October 2003.

28.

Wang

(1997) Welding of nitinol to stainless steel. In: Pelton

Hodgson

Russell

Duerig

(eds) Proceedings of the international conference on shape memory and super elastic technologies, Proc. SMST-97. Pacific Grove, CA, 2–6 March 1997, pp. 131–136, International Organization on Shape Memory and Superelastic Technologies (SMST).

29.

Weinert

Petzoldt

(2004) Machining of NiTi based shape memory alloys. Materials Science and Engineering A: Structural Materials Properties Microstructure and Processing 378: 180–184.

30.

(2001) Fabrication of nitinol materials and components. In: Chu

Zhao

(eds) Proceedings of the international conference on shape memory and super elastic technologies. Kunming, China, 2–6 September 2001, pp. 258–292, Trans Tech Publications Inc. Dumtem-Zurich.