Nowadays, harvesting energy from vibration is one of the most promising technologies. However, the majority of current researches obtain 10 µW to 100 mW power, which has only limited applications in self-powered wireless sensors and low-power electronics. In fact, the vibrations in some situations can be very large, for example, the vibrations of tall buildings, long bridges, vehicle systems, railroads, ocean waves, and even human motions. With the global concern on energy and environmental issues, energy harvesting from large-scale vibrations is more attractive and becomes a research frontier. This article is to provide a timely and comprehensive review of the state-of-the-art on the large-scale vibration energy harvesting, ranging from 1 W to 100 kW or more. Subtopics include energy assessment from large vibrations, piezoelectric materials and electromagnetic transducers, motion transmission and magnification mechanisms, power electronics, and vibration control. The relevant applications discussed in this article include vibration energy harvesting from human motion, vehicles, transportations, and civil structures. The unique challenges and future research directions of large-scale vibration energy harvesting are also discussed.
AldraihemOBazA (2011) Energy harvester with dynamic magnifier. Journal of Intelligent Material Systems and Structures22(6): 521–530.
2.
AntakiJFBertoccGEGreenEC. (1995) A gait-powered autologous battery charging system for artificial organs. ASAIO Journal41(3): M588–M595.
3.
ArmsSWTownsendCPChurchillDL. (2005) Power management for energy harvesting wireless sensors. Proceedings of SPIE5763: 267–275.
4.
BadelABenayadALefeuvreE. (2006) Single crystals and nonlinear process for outstanding vibration-powered electrical generators. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control53: 673–684.
5.
BandivadekarABodekKCheahL. (2008) On the road in 2035: reducing transportation’s petroleum consumption and GHG emissions. Report no. LFEE 2008-05 RP. Cambridge, MA: MIT Laboratory for Energy and the Environment. 13August2008.
6.
BellLE (2008) Cooling, heating, generating power, and recovering waste heat with thermoelectric systems. Science321(5895): 1457–1461.
7.
BoldeaINasarSA (1997) Linear Electric Actuators and Generators. Cambridge: University of Cambridge; Cambridge University Press.
8.
BoudR (2003) Status and Research and Development Priorities, Wave and Marine Current Energy, UK Dept. of Trade and Industry (DTI), DTI Report # FES-R-132, AEAT Report # AEAT/ENV/1054.
9.
BownessDLockACPowrieW. (2007) Monitoring the dynamic displacements of railway track. Proceedings of the Institution of Mechanical Engineers, Part F: Journal of Rail and Rapid Transit221(1): 13–22.
CaoXLeeY (2006) Design and fabrication of mini vibration power generator system for micro sensor networks. In: Proceedings of 2006 IEEE international conference on information acquisition, Shanghai, China, 20–23 Augustd 2006, pp. 91–95.
12.
CaoXChiangWKingY. (2007) Electromagnetic energy harvesting circuit with feedforward and feedback DC-DC PWM boost converter for vibration power generator system. IEEE Transactions on Power Electronics22(2): 679–685.
13.
CargoC JPlummerAHillisR. (2011) Determination of optimal parameters for a hydraulic power take-off unit of a wave energy converter in regular waves. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 226(1), pp. 98–111.
14.
CassidyIL (2011) Modeling and control of an electromagnetic transducer for vibration energy harvesting applications. Master Thesis, Department of Civil and Environmental Engineering, Duke University, Durham, NC.
15.
CassidyILScruggsJT (2012) A statistical linearization approach to optimal nonlinear energy harvesting. Proceedings of SPIE8341: 834105-1–834105-12.
16.
CassidyILScruggsJTBehrensS (2011) Design of electromagnetic energy harvesters for large-scale structural vibration applications. Proceedings of the SPIE International Symposium on Smart Materials and Structures/NDE, 6–10 March 2011, San Diego, CA.
17.
ChalasaniSConradJM (2008) A survey of energy harvesting sources for embedded systems. In: Proceedings of IEEE Southeastcon, Huntsville, Alabama, 3-6 April 2008, pp. 442–447.
ChenCLiaoW (2012) A self-sensing magnetorheological damper with power generation. Smart Materials and Structures21(2): 025014.
20.
ChenCIslamRAPriyaS (2006) Electric energy generator. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control53(3): 656–661.
21.
ChoiSSeongMKimK (2009) Vibration control of an electrorheological fluid-based suspension system with an energy regenerative mechanism. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering223(4): 459–469.
22.
CollinsL (2006) Harvesting for the world: energy harvesting techniques. IEEE Power Engineer20: 34–37.
23.
DallagoEMiattonDVenchiG. (2008) Active self supplied AC-DC converter for piezoelectric energy scavenging systems with supply independent bias. In: IEEE international symposium on circuits and systems, ISCASSeattle, Washington, 18–21 May 2008.
24.
DelaureY(2003) 3D hydrodynamic modelling of fixed oscillating water column wave power plant by a boundary element methods. Ocean Engineering, 30(3), pp. 309–330.
25.
DonelanJMLiQNaingV. (2008) Biomechanical energy harvesting: generating electricity during walking with minimal user effort. Science319(5864): 807–810.
26.
DrewBPlummerASahinkayaM (2009) A review of wave energy converter technology. Proc. IMechEVol. 223 Part A: J. Power and Energy, 223(8): 887–902.
27.
DuYZhouXBaiS. (2010) Review of non-isolated bidirectional DC-DC converters for plug-in hybrid electric vehicle charge station application at municipal parking decks. In Applied Power Electronics Conference and Exposition (APEC), 2010 Twenty-Fifth Annual IEEE, pp. 1145–1151.
28.
DwariSParsaL (2010) An efficient AC–DC step-up converter for low-voltage energy harvesting. IEEE Transactions on Power Electronics25(8): 2188–2199.
29.
East Japan Railway Company (2008) Demonstration experiment of the “Power-Generating Floor” at Tokyo station. Available at: http://eastjapanrail.com/
30.
EbrahimiBKhameseeMBGolnaraghiMF (2008) Design and modeling of a magnetic shock absorber based on eddy current damping effect. Journal of Sound and Vibration315(4–5): 875–889.
31.
Electric Power Research Institute (EPRI) (2011) Mapping and Assessment of the United States Ocean Wave Energy Resource 2011.
32.
FairbanksJ (2011) Vehicular thermoelectrics: a new green technology. In: Thermoelectric applications workshop, Coronado, CA, 3–8 January.
33.
FalcãoA F D O (2010) Wave energy utilization: A review of the technologies. Renewable and Sustainable Energy Reviews, 14(3): 899–918.
34.
FarritorSArnoldRLuS. (2006)Real-time vertical track modulus measurement system from a moving railcar. Reported to Federal Railroad Administration. July2006, Report number: RR-06-08.
35.
FerrariMFerrariVGuizzettiM. (2006) Piezoelectric multi-frequency energy converter for power harvesting in autonomous Microsystems. In: Eurosensors, Göteborg, Sweden, 17–20September2006.
36.
FlemingAJ (2002) Optimization and implementation of multimode piezoelectric shunt damping system. IEEE-ASME Transactions on Mechatronics71: 87–94.
37.
GalhardiMAGuilhermeTHJuniorVL (2008) A review of power harvesting from vibration using piezoelectric materials and applications. In: The 7th Brazilian conference on dynamics, control and applications. Presidente Prudente, Brazil, 7–9 May 2008
38.
GambleSRobinsonJAlkhatibR. (2009) Performance-based design for motion control of a supertall tower. In: Proceedings of the 2009 structures congress, Austin, TX, 30 April – 2 May 2009.
39.
GiorgettiNBemporadATsengH E. (2006) Hybrid model predictive control application towards optimal semi-active suspension, International Journal of Control, 79(5): 521–533.
40.
GoldnerRBZerigianPHullJR (2001) A preliminary study of energy recovery in vehicles by using regenerative magnetic shock absorbers. SAE paper #2001-01-2071.
41.
GranstromJFeenstraJSodanoHA. (2007) Energy harvesting from a backpack instrumented with piezoelectric shoulder straps. Smart Materials and Structures16: 1810–1820.
42.
GuptaAJendrzejczykJAMulcahyTM. (2006) Design of electromagnetic shock absorbers. International Journal of Mechanics and Materials in Design3(3): 285–291.
43.
GuyomarDBadelALefeuvreE. (2005) Toward energy harvesting using active materials and conversion improvement by nonlinear processing. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control52(4): 584–595.
44.
HagoodNWFlotowAV (1991) Damping of structural vibrations with piezoelectric materials and passive electrical networks. Journal of Sound and Vibration146: 243–268.
45.
HanJJouanneALeT. (2004) Novel power conditioning circuits for piezoelectric micro power generators. In: Proceedings of the 19th annual IEEE applied power electronics conference and exposition, Anaheim, California, 22–26 February 2004, pp. 1541–1546.
46.
HaskettTBreukelmanBRobinsonJ. (2004) Tuned-mass damper under excessive structural excitation. Report of the Motioneering Inc., Guelph, ON, Canada.
47.
HendersonR (2006) Design, simulation, and testing of a novel hydraulic power take-off system for the Pelamis wave energy converter. Renewable Energy, 31(2): 271–283.
48.
HollkampJJ (1994) Multimodal passive vibration suppression with piezoelectric materials and resonant shunt. Journal of Intelligent Material Systems and Structures5: 49–57.
49.
HousnerGWBergmanLACaugheyTK. (1997) Structural control: past, present, and future. Journal of Engineering Mechanics123(9): 897–971.
50.
HuangKYu Fand ZhangY (2011) Active controller design for an electromagnetic energy-regenerative suspension. International Journal of Automotive Technology12(6): 877–885.
InoueSAkagiH (2007) A bidirectional DC–DC converter for an energy storage system with galvanic isolation. IEEE Transactions on Power Electronics22(6): 2299–2306.
53.
ISO 2631-1:1997 (1997) Mechanical vibration and shock—evaluation of human exposure to whole body vibration—part 1: general requirements.
54.
JalbrzykowskiSCitkoT (2009) A bidirectional DC-DC converter for renewable energy systems. Bulletin of the Polish Academy of Sciences: Technical Sciences57(4):363–368.
55.
JohnsonTJCharnegieDClarkWW. (2006) Energy harvesting from mechanical vibrations using piezoelectric cantilever beams. In: Proceedings of SPIE, structure sand materials: damping and isolation, San Diego, CA, 15 March 2006, vol. 6169, pp. 81–92.
56.
JollyMRMargolisDL (1997) Regenerative systems for vibration control. Journal of Vibration and Acoustics119: 208–215.
57.
KaramiMAFarmerJRInmanDJ (2012) Nonlinear dynamics of the bi-stable piezoelectric wind energy harvester. In: Proceedings of SPIE, San Diego, CA, 11–15 March 2012, vol. 8341.
58.
KareemAKijewskiTTamuraY (1999) Mitigation of motions of tall buildings with specific examples of recent applications. Wind and Structures2(3): 201–251.
59.
KawamotoYSudaYInoueH. (2007) Modeling of electromagnetic damper for automobile suspension. Journal of System Design and Dynamics1(3): 524–535.
60.
KawamotoYSudaYInoueH. (2008) Electro-mechanical suspension system considering energy consumption and vehicle maneuver. Vehicle System Dynamics46: 1053–1063.
61.
KazimierczukMKMassariniA (1997) Feedforward control of DC-DC PWM boost converter. IEEE Transactions on Circuits and Systems44: 143–148.
62.
KimHPriyaSStephanousH. (2007) Consideration of impedance matching techniques for efficient piezoelectric energy harvesting. IEEE Transactions on Ultrasonics Ferroelectrics and Frequency Control, 54(9): 1851–1859.
63.
KimSOkadaY (2002) Variable resistance type energy regenerative damper using pulse width modulated step-up chopper. Journal of Vibration and Acoustics124: 110–115.
64.
KornbluhRDPelrineRPeiQ. (2002) Electroelastomers: applications of dielectric elastomer transducers for actuation, generation, and smart structures. Proceedings of SPIE4698: 254–270.
65.
LiQNaingVHofferJA. (2008) Biomechanical energy harvesting: apparatus and method. In: 2008 IEEE international conference on robotics and automation, Pasadena, California,19–23 May 2008, pp. 3672–3677.
66.
LiPZhangCZuoL (2013) Review of power electronics for kinetic energy harvesting systems. In proceedings of SPIE Conferences on Smart Structures and Materials.10-14March 2013, San Diego, CA.
67.
LiZBrindakZZuoL (2011) Modeling of an electromagnetic vibration energy harvester with motion magnification. In: 2011 ASME international mechanical engineering congress and exposition (IMECE), CO. Denver, Colorado, 11–17 November 2011.
68.
LiZZuoLKuangJ. (2012) A motion rectifier based energy harvesting shock absorber. In: 2012 ASME design engineering conference. Chicago, Illinois, 12–15 August 2012.
69.
LiuYTianGWangY. (2009) Active piezoelectric energy harvesting: general principle and experimental demonstration. Journal of Intelligent Material Systems and Structures20: 575–585.
70.
MaclaurinAOkouRBarendseP. (2011) Control of a flywheel energy storage system for rural applications using a Split-Pi DC-DC converter. In Electric Machines and Drives Conference (IEMDC), 2011IEEE International, 265–270.
71.
MacKayD (2009) Sustainable Energy—Without the Hot Air. Cambridge: UIT Cambridge Ltd.
72.
MannBPSimsND (2009) Energy harvesting from the nonlinear oscillations of magnetic levitation. Journal of Sound and Vibration319(1–2): 515–530.
73.
MartinsIEstevesJMarquesGD. (2006) Permanent-magnets linear actuators applicability in automobile active suspensions. IEEE Transactions on Vehicular Technology55(1): 86–94.
74.
MeiC C (2012) Hydrodynamic principles of wave power extraction Hydrodynamic principles of wave power. Strategies, pp. 208–234.
75.
MirzaeifarRBahaiHShahabS (2008) Active control of natural frequencies of FGM plates by piezoelectric sensor/actuator pairs. Smart Materials and Structures17(4): 045003 (8 pp.).
76.
MitchesonPDMiaoPStarkBH. (2004) MEMS electrostatic micro-power generator for low frequency operation. Sensors and Actuators115: 523–529.
77.
MohanNUndelandTRobbinsW (1995) Power Electronics: Converters, Applications and Design. New York: Wiley.
78.
NakanoKSudaY (2004) Combined type self-powered active vibration control of truck cabins. Vehicle System Dynamics41: 449–473.
79.
NakanoKSudaYNakadaiS (2003) Self-powered active vibration control using a single electric actuator. Journal of Sound and Vibration260: 213–235.
80.
NiTZuoLKareemA (2011) Assessment of energy potential and vibration mitigation of regenerative tuned mass dampers on wind excited tall buildings. In: 2011 ASME design engineering technical conferences, Washington, DC, 29–31 August 2011.
OttmanGBhattACHofmannHF. (2002) Adaptive piezoelectric energy harvesting circuit for wireless remote power supply. IEEE Transactions on Power Electronics17: 669–676.
83.
OttmanGHofmannHFLesieutreGA (2003) Optimized piezoelectric energy harvesting circuit using step-down converter in discontinuous conduction mode. IEEE Transactions on Power Electronics18: 696–703.
84.
Palomera-AriasR (2005) Passive electromagnetic damping device for motion control of building structures. PhD Thesis, Massachusetts Institute of Technology, Cambridge, MA.
85.
ParadisoJStarnerT (2005) Energy scavenging for mobile and wireless electronics. IEEE Pervasive Computing4: 18–26.
86.
ParkGRosingTToddMD. (2008) Energy harvesting for structural health monitoring sensor networks. Journal of Infrastructure Systems14: 64–79.
87.
PenamalliGR (2011) Structural health monitoring and energy harvesting for railroad. Master Thesis, State University of New York at Stony Brook, Stony Brook, NY.
88.
PengF ZLiHSuG J. (2004) A new ZVS bidirectional DC-DC converter for fuel cell and battery application. Power Electronics, IEEE Transactions on19(1): 54–65.
89.
PhillipsKJ (2011) Simulation and control system of a railroad track power harvesting device. Master Thesis, University of Nebraska-Lincoln, Lincoln, NE.
RomeLCFlynnLGoldmanEM. (2005) Generating electricity while walking with loads. Science309: 1725–1728.
92.
SaadonSSidekO (2011) A review of vibration-based MEMS piezoelectric energy harvesters. Energy Conversion and Management52(1): 500–504.
93.
SchupbachR MBaldaJ C (2003) Comparing DC-DC converters for power management in hybrid electric vehicles. In Electric Machines and Drives Conference, 2003. IEMDC’03. IEEE International3:1369–1374.
94.
SchwartzTA (2001) When bad things happen to good buildings. Architecture Week, 25. April2001.
95.
ScottR (2001) In the Wake of Tacoma: Suspension Bridges and the Quest for Aerodynamic Stability. Reston, VA: ASCE Press.
96.
ScruggsJT (1999) Active, regenerative control of civil structure. Master Thesis, Virginia Polytechnic Institute and State University, Blacksburg, VA.
97.
ScruggsJT (2004) Structure control using regenerative force actuation networks. PhD Thesis, California Institute of Technology, Pasadena, CA.
98.
ScruggsJT (2007) Multi-objective optimization of regenerative damping in vibrating structures. In: Proceedings of the 27th American control conference, New York, 9–13 July 2007.
99.
ScruggsJT (2010) Multi-objective nonlinear control of semiactive and regenerative systems. In: Proceedings of the 30th American control conference, Baltimore, Maryland, 30 June – 2 July 2010.
100.
ScruggsJTLindnerDK (1999) Active energy control in civil structures. In: Proceedings of SPIE, Newport Beach, CA, March1999.
101.
ScruggsJTCassidyILBehrensS (2012) Multi-objective optimal control of vibratory energy harvesting systems. Journal of Intelligent Material Systems and Structures. Published online before print May6, 2012, doi:10.1177/1045389X12443015.
102.
ShenckNParadisoJ (2001) Energy scavenging with shoe-mounted piezoelectrics. IEEE Micro21(3): 30–42.
103.
SodanoHAInmanDJ (2004) A review of power harvesting from vibration using piezoelectric materials. The Shock and Vibration Digest36: 197–205.
104.
SodanoHAParkGInmanDJ (2004) Estimation of electric charge output for piezoelectric energy harvesting. Strain40: 49–58.
105.
SoongTTSpencerBF (2002) Supplemental energy dissipation: state-of-the-art and state-of-the practice. Engineering Structures24: 243–259.
106.
StantonSCMcGeheeCCMannBP (2010) Nonlinear dynamics for broadband energy harvesting: investigation of a bistable piezoelectric inertial generator. Physica D: Nonlinear Phenomena239(10): 640–653.
107.
StarnerTParadisoJ (2004) Human generated power for mobile electronics. In: Low Power Electronics Design, PiguetC., ed., CRC Press, 2004, vol. 45, pp. 1–35.
108.
SudaYShiibaTHioK. (2003) Study on electromagnetic damper for automobiles with nonlinear damping force characteristics road test and theoretical analysis. In: Proceedings of the 18th IAVSD symposium, vehicle system dynamics supplement, Kanagawa, Japan24–30 August 2003, vol. 41, pp. 637–646.
109.
SudaYSuematsuKNakanoK. (2000) Study on electromagnetic suspension for automobiles simulation and experiments of performance. In: Proceedings of the 5th international symposium on advanced vehicle control, Ann Arbor, Michigan, 22–24 August 2000, pp. 699–704.
110.
SunJQJollyMRNorrisMA (1995) Passive, adaptive and active tuned vibration absorbers—a survey. Journal of Vibration and Acoustics 117(B): 234–243.
111.
TangXZuoL (2010) Self-powered active control of structures with TMDs. In: IMAC XXVIII conference and exposition on structural dynamics: structural dynamics and renewable energy, Jacksonville, FL, 1–4 February 2010.
112.
TangXZuoL (2011a) Enhanced vibration energy harvesting using dual-mass systems. Journal of Sound and Vibration330(21): 5199–5209.
113.
TangXZuoL (2011b) Simulation and experiment validation of simultaneous vibration control and energy harvesting from buildings via tuned mass dampers. In: Proceedings of America control conference, San Francisco, CA, 29 June – 1 July 2011.
114.
TangXZuoLLinT. (2011) Improved design of linear electromagnetic transducers for large-scale vibration energy harvesting. In: Proceedings of SPIE: smart structures and materials, San Diego, California, 6–10 March 2011.
WangJLinTZuoL (2013) High efficiency electromagnetic energy harvester for railroad application, submitted to 2013 ASME Design Engineering Technical Conference (IDETC 2013).
YangJ (2009) Develop thermoelectric technology for automotive waste heat recovery. In: DOE 2009 vehicle technologies annual merit review and peer evaluation meeting, Arlington, VA, 18–22 May 2009.
120.
YangJFrancisR (2009) Automotive applications of thermoelectric materials. Journal of Electronic Materials38(7):1245–1251.
121.
ZhangYHuangKYuF.(2007) Experimental verification of energy-regenerative feasibility for an automotive electrical suspension system, IEEE International Conference on Vehicular Electronics and Safety, ICVES, 13– 15 December 2007, Beijing, China, pp. 1–5.
122.
ZhengXYuFZhangY (2008) A novel energy-regenerative active suspension for vehicles. Journal of Shanghai Jiaotong University (Science)13(2): 184–188.
123.
ZhouK (1996) Robust and Optional Control. Upper Saddle River, NJ: Prentice Hall.
124.
ZhouWPenamalliGRZuoL (2011) Efficient and broadband vibration energy harvester with multi-mode dynamic magnifier. Smart Materials and Structures21(1): 015014.
125.
ZuoLTangX (2009) Circuit optimization and dynamics analysis of electromagnet-based vibration energy harvesting systems. In: Proceedings of the ASME 2009 IDETC/CIE. San Diego, California, 30 August – 2 September 2009.
126.
ZuoLTangXZhangP (2010) Electricity-Generating Shock Absorbers, United States Patent Application 31/368,846, Filed 07/2010.
127.
ZuoLZhangP (2011) Energy, ride comfort, and road handling of regenerative vehicle suspensions. In: 2011 ASME dynamic systems and control conference, Arlington, Virginia, 31 October – 2 November 2011.
128.
ZuoLChenXNayfehS (2011a) A new type of eddy current damper with increased energy density. Journal of Vibration and Acoustics133: 0410061-6.
129.
ZuoLPenamalliGPWangJ. (2011b) High-efficiency energy generator for harvesting ocean wave and mechanical vibration power. US patent application # 61/476.019.
130.
ZuoLScullyBShestaniJ. (2011c) Design and characterization of an electromagnetic energy harvester for vehicle suspensions. Smart Materials and Structures19(4): 045003.
